The Voyager EXP is an outstanding Wing for Single-Tank Diving with its Low-Profile, Donut-Shape Design. Streamlined Side Panels and a Minimalist, Oval Shape creates a Higher-Lift Wing that remains Unobtrusive instead of Bulky. This is ideal for divers with larger statures or those who dive in cold water and/or require more weight. The Voyager accommodates up to one 95 cubic feet (15 liter) Tank and provides 35 lbs (15.8 kg) of Lift.
With its Donut-Shape, the Voyager Wing provides greater Stability and Control in the Water. Donut-Style or 360 Degree Wings promote an Even Volume of Inflation On-Top, Sides and Bottom, which Improves Buoyancy Control and promotes a more Efficient, Horizontal Trim. The Dive Rite Voyager EXP Wing is manufactured from Value-Driven and Durable 1680-Ballistic Nylon EXP Material that is Resistant to Tears and Abrasions. The Voyager EXP line's Toughness is further enhanced with a Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder.
The Voyager EXP has Urethane Flanges Welded in place which makes it easy to switch out Corrugated Hose and Over-Pressure Relief Valves without tools. The Voyager EXP comes with either a 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator and a Low Pressure Hose for attachment to the First-Stage Regulator. Wing has a Lower Left Front Over-Pressure Relief/Dump Valve. Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes are used to attach the Wing to the Harness and Set Divers Trim. The Voyager EXP measures approximately (H x W) 22" x 19" (55.8 x 48.3 cm) deflated and weighs 2.8 lbs (1.27 kg). The Package comes with Owner Manuals and is covered by Dive Rite's Limited Lifetime Warranty. Transpac Package is proudly made in the USA.
This product has a limited warranty of 12 months.
Reviewed by 1 customer
Displaying review 1
Comments about Dive Rite Voyager EXP Wing:
I have been using various Dive Rite gear for years without any problems so this wing has been a bit of a surprise. Bought in Feb 2015 from Leisurepro but not used until July ( a week ago) when I took it on a dive vacation to Turks and Caicos. It was used on 4 easy recreational dives, when I surfaced on the 4th dive and inflated it at the surface the seam on the left side tore along the stitching for about 4" exposing the bladder.
This can only be poor quality construction and I contacted Leisurepro- however they say that the wing was purchased more than 120 days ago so I have to contact the manufacturer. Meantime I am still on vacation with a wing that I do not want to use and a borrowed BCD.
Motto of the story:
Make sure you use any Leisurepro purchased equipment well within the 120 days or you are on your own!