Dive Rite : Picture 1 thumbnail Dive Rite : Picture 2 thumbnail

About Dive Rite Travel EXP Wing

The Travel EXP is a Lightweight Wing Designed for Single-Tank, Warm Water Diving. Dive Rite's Travel Series of Wings are Small-Profile and ideal for Travel and divers who wear a Minimal amount of Weight. At 25 lbs (11.3 kg) of Lift, the Travel can accommodate one 80 cubic feet (12 liter) Tank with no more than 16 lbs (7.26 kg) of additional weight

With its Donut-Shape, the Travel Wing provides greater Stability and Control in the water. Donut-Style or 360 Degree Wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more Efficient, Horizontal Trim. The Dive Rite Travel EXP Wing is manufactured from Value-Driven and Durable 1680-Ballistic Nylon EXP Material that is Resistant to Tears and Abrasions. The Travel EXP line's Toughness is further enhanced with a Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder. The Travel EXP has Urethane Flanges Welded in place which makes it easy to switch out Corrugated Hose and Over-Pressure Relief Valves without tools. The Travel EXP comes with either a 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator and a Low Pressure Hose for attachment to the First-Stage Regulator. Wing has a Lower Left Front Over-Pressure Relief/Dump Valve. A set of Marine-Grade 316-Stainless Steel Grommet Mounting Holes are used to attach wing to Harness and/or Singles Mounting Plate.The Travel EXP measures approximately (H x W) 21.5" x 15" (54.6 x 38.1 cm) deflated and weighs 2.4 lbs (1.1 kg). The Dive Rite Travel EXP Wing comes with Owner Manual, is covered by Dive Rite's Limited Lifetime Warranty, and is proudly made in the USA.

Warranty Information

This product has a limited warranty of 12 months.


Dive Rite Travel EXP Wing Features

  • Lightweight Wing Designed for Single-Tank, Warm Water Diving
  • Small-Profile and Ideal for Travel
  • Lift Capacity: 25 lbs (11.3 kg)
  • Accommodate Single 80 cubic feet (12 liter) Tank
  • No more than 16 lbs (7.26 kg) Additional Weight
  • Donut-Shape Provides Greater Stability and Control in Water
  • Donut-Style 360 Degree Wings
  • 360 Degree Wings Promote Even-Volume of Inflation On-Top, Sides and Bottom
  • Improves Buoyancy Control and Promotes More Efficient, Horizontal Trim
  • Outer Bag: Value-Driven and Durable 1680-Ballistic Nylon
  • Bag is Resistant to Tears and Abrasions
  • Inner Bladder: Heavy-Duty 210-Denier Nylon Urethane Laminated
  • Urethane Flanges: for Easy Switching Out of Corrugated Hose and Over-Pressure Relief Valves w/o Tools
  • 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator
  • Low Pressure Hose
  • Lower Left Front Over-Pressure Relief/Dump Valve
  • Set of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
  • Dimensions (Deflated): Approximately (H x W) 21.5" x 15" (54.6 x 38.1 cm)
  • Weight: 2.4 lbs (1.1 kg)
  • Owner's Manual
  • Limited Lifetime Warranty
  • Made in the USA

Dive Rite Travel EXP Wing Specifications

Bc Body
Wing, Back Inflator
Buoyancy Bag
25 Lbs (11.3 Kg)
Valves
Over-Pressure Relief/Dump Valve
Oral Inflator
Dive Rite Power Inflator
Materials
Outer Bag: 1,680-Ballistic Nylon, Bladder: 210-Denier Nylon Urethane Laminated, Grommets: 316-Stainless Steel
Weight
2.4 Lbs (1.1 Kg)
Available in the Following Sizes:
12" With Elbow, 16" With Elbow
Weight [with packaging]
12" With Elbow: 2.35 lb,
16" With Elbow: 2.5 lb
Mfr #
SKU
DIVB4100

Travel EXP Wing Customer Reviews

Write a Review

REVIEW SNAPSHOT®

by PowerReviews
Dive Rite Travel EXP Wing
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(1 of 1 customers found this review helpful)

 
5.0

Perfect warm water wing

By toptech

from Southeast Florida

About Me Advanced

See all my reviews

Verified Buyer

Pros

  • Comfortable

Cons

    Best Uses

    • Recreation
    • Warm Water

    Comments about Dive Rite Travel EXP Wing:

    Several Dive Rite dealers tried to steer me away from this wing indicating it did not have enough lift, that was in fact the reason I bought a Voyager wing for my first backplate rig. I never felt like I needed the lift capacity of the larger wing so I took a chance and bought this one for a new lighter travel rig. The travel wing is much more streamlined and even weighted to equal my older steel backplate I have had no problem with lift capacity,your mileage may vary.:-)

    • Diving Type:
    • Night Diving, Open Water Diving
    • Was this a gift?:
    • No

    Comment on this review

    Displaying review 1

    Back to top

    Q&A

    Questions & Answers Powered by TurnTo®

    Questions about this item:

    Shopper  What is the distance between grommets for attaching wing to plate? Looking to see if it would fit my old dacor rig.
    KEVIN F  Alfred is correct. Or 28.5 cm from middle of grommets.
    Bryan S  What do you mean by 12" with elbow or 16" with elbow? Thank you.
    Wally B  They mean the corrugated exhaust hose with the inflator/deflator on the end. You have a choice of two lengths. Most recreational divers choose the 16", many cave and technical divers choose the 12".
    Martina z  hello. about this bcd, may i ask the difference of 16" With Elbow and 12" With Elbow? thanks a lot.
    ALFRED G  This refers to the length of the inflator hose , so the difference is 4" :-)
    top
    Share this item: