About Dive Rite Air Cell CCR XT Wing with Elbow 16" (40.6cm) Inflator
The Dive Rite Model BC5500 CCR XT Wings outer bag is made of super-fabric brand technology and 1000-denier Cordura, inner shell creates an armor-clad outer bag that is impervious to damaging pinches and cuts offering superior durability. The inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly-resistant to pinches and punctures. Urethane flanges are welded in place, which make it easy to switch out the corrugated hoses and over pressurization valves without tools.The air cell comes equipped with a 16" (40.6cm) elbow inflator and along with a 27" (68.6cm) low-pressure 3/8" threaded inflation hose.
Two sets of marine grade 316-stainless-steel grommet mounting holes are used to attach wing to harness and set diver trim.CCR Series Wing is designed for the O2ptima eCCR or any re-breather diver looking to streamline their hoses. The inflator hose is offset, lying just to the outside of the chest mounted counter lungs. The open mid-section allows re-breather hoses to run through the middle of the wing, freeing up space behind the diver's head and keeping airflow from being compressed at the top of the wing. This also means airflow is no longer restricted at the top of the wing due to hoses pressing down over the wing.
The CCR Series is an adjustable lift wing, sporting an optional gusset control system (GCS) cord that can be used to further streamline the wing such as when carrying small bailout bottles. The GCS is not a bungee wing because it does not restrict air flow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity. Wing is made exclusively in the U.S.A. The CCR XT Wing measures (H x W) approximately 22 x 21" (55.8 x 53.3cm) un-inflated and provides 40 lbs (18.1kg) of Lift. The wing comes with an owner's manual and weighs 3 lbs (1.4kg).
Warranty Information
This product has a limited warranty of 12 months.
http://www.diverite.com/service/warrantypolicy/
800-495-1046
Dive Rite Air Cell CCR XT Wing with Elbow 16" (40.6cm) Inflator Features
- CCR XT Wing:
- Elbow 16" (40.6 cm) Inflator
- Super-Fabric Brand Technology:
Outer Bag: 1000-Denier Cordura
Inner Shell: Create Armor-Clad Outer Bag
Impervious to Damaging Pinches & Cuts
Offering Superior Durability
Inner Bladder: Heavy-Duty 210 Denier Nylon Laminated Bladder
Highly-Resistant to Pinches & Punctures - Welded In-Place Urethane Flanges:
Easy to Switch-Out Corrugated Hoses & Over Pressurization Valves
No Tools Required - 27" (68.6cm) Low-Pressure 3/8" Threaded Inflation Hose
- Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
- Mounting Holes: Attach Wing to Harness & Set Diver Trim
- CCR Series Wing Designed for O2ptima eCCR or Re-Breather Diver looking to Streamline Hoses
- Offset Inflator Hose Lying Outside Chest-Mounted Counter-Lungs
- Open Mid-Section:
Allows Re-Breather Hoses to Run Thru-Middle of Wing
Frees-Up Space Behind Diver's Head
Keeps Airflow from Compressing at Top of Wing
Airflow Not Restricted at Top of Wing Due to Hoses Pressing-Down-Over Wing - Adjustable Lift Wing:
Optional Gusset Control System (GCS) Cord
Streamline Wing when Carrying Bailout Bottles
GCS Promotes Streamlining & Buoyancy Control
GCS Allows Wing to Inflate to Full Capacity - Dimensions (Deflated): Approximately (H x W) 22 x 21" (55.8 x 53.3cm)
- Lift: 40 lbs (18.1kg)
- Weight: 3 lbs (1.4kg)
- Owner's Manual