About Dive Rite Rec XT Wing Dual Bladder
The Rec XT Dual Bladder Wing is designed for the technical diver who requires a back-up source of buoyancy inflation. These wings offer the same lift capacity of their single bladder counterpart, yet have a second bladder with a dedicated inflator hose and OPV. The Rec XT Dual Bladder Wing is one of Dive Rite's Innovative Lines of 360°, donut-style wings. Donut wings tend to provide greater stability and control in the water, improving diver buoyancy and trim. The Rec XT Wing is shorter than Dive Rite's traditional Rec Wing, which means it now fits a wider range of diver statures; whereas Dive Rite's traditional Rec Wing is best suited for tall divers or divers who require more buoyancy at the waist.
A hybrid wing, the Rec XT Wing can be worn on single or double tanks making it one of Dive Rite's most popular wings. When diving with a single tank, the Rec XT Wing has 2 clips on each side attach to D-rings on the back-plate, keeping the wing close to the diver's body. This avoids the taco" effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control.
At full lift capacity, the Rec XT has 45 lbs. (20.4 kg) of lift and can accommodate Two 85 cubic feet (12 liter) back mounted cylinders.
The XT Wing Series is built upon the legendary toughness of Super-Fabric Brand Technology, a technical fabric resistant to cuts, pinches and abrasions. This unique material has been created with a base fabric overlaid with tiny guard plates, this proprietary armored surface, along with material science and strategic geometric patterns, transforms ordinary fabric into Super-Fabric Brand Materials. The material maintains its flexibility and breathability, yet keeps sharp objects from penetrating.
Dive Rite has married Super-Fabric with a 1,000-denier Cordura inner shell to create an Armor-clad outer-bag that is impervious to damaging pinches and cuts. The Rec XT line's toughness is further enhanced with a heavy-duty, radio frequency (RF) welded 210-denier nylon urethane laminated bladders. The Rec XT has urethane flanges welded in place which makes it easy to switch out corrugated hose and over-pressure relief valves without tools. The XT comes with either a 16" or 12" (40.6cm or 30.5cm) primary elbowed inflator, a 12" (30.5cm) back-up inflator and two 3/8" threaded low-pressure hoses for attachment to the first-stage regulator. Wing is equipped with 2 over-pressure relief/dump valve. Two sets of marine grade 316-stainless-steel grommet mounting holes are used to attach the wing to the harness and/or double tanks and set divers trim. The Rec XT measures approximately (H x W) 24" x 23" (60.9cm x 58.4cm) deflated and weighs approximately 3.12 lbs. (1.41 kg). The Dive Rite Rec XT Dual Bladder Wing comes with an Owner Manual, and is proudly made in the U.S.A.
Warranty Information
This product has a limited warranty of 12 months.
- -
Dive Rite Rec XT Wing Dual Bladder Features
- Dive Rite Rec XT Wing Dual Bladder:
- Accommodate Two 85 cu. ft. (12 liter) Back Mounted Cylinders
- Double Tank Wing System
- Designed for Technical Diver Requiring Back-Up Source of Buoyancy Inflation
- Second Bladder w/Dedicated Inflator Hose & OPV
- Legendary Toughness of Super-Fabric Brand Technology
- Technical Fabric Resistant to Cuts, Pinches & Abrasions
- Base Fabric Overlaid w/Tiny Guard Plates, Proprietary Armored Surface
- Strategic Geometric Patterns:
Transforms Ordinary Fabric into Super-Fabric Brand Materials - Flexible and Breathable, Yet Prevents Sharp Objects from Penetrating
- Dive Rite Married Super-Fabric with 1,000-Denier Cordura
- Created an Armor-Clad Outer-Bag Impervious to Damaging Pinches & Cuts
- Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder
- Welded In-Place Urethane Flanges:
Easy to Switch-Out Corrugated Hoses & Over Pressurization Valves
No Tools Required - 16" or 12" (40.6cm or 30.5cm) Elbowed Primary Inflator
- 12" (30.5cm) Back-Up Inflator
- Two 3/8" Threaded Low Pressure Hose
- Over-Pressure Relief/Dump Valve
- Lift: 45 lbs. (20.4 kg)
- Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
- Dimensions (Deflated): Approximately (H x W) 24" x 23" (60.9cm x 58.4cm)
- Weight: 3.12 lbs. (1.41 kg)
- Owner's Manual
- Made in the USA