Dive Rite Travel XT Wing 16" With Elbow

Dive Rite
SKU: DIV510016 MFR: BC5100-E-16
Dive Rite : Picture 1 thumbnail Dive Rite : Picture 2 thumbnail

About Dive Rite Travel XT Wing

The Travel XT is a Lightweight Wing Designed for Single-Tank, Warm Water Diving. Dive Rite's Travel Series of Wings are Small-Profile and ideal for Travel and divers who wear a Minimal amount of Weight. At 25 lbs (11.3 kg) of Lift, the Travel XT can accommodate one 80 cubic feet (12 liter) Tank with no more than 16 lbs (7.26 kg) of additional weight

With its Donut-Shape, the Travel XT Wing provides greater Stability and Control in the water. Donut-Style or 360 Degree Wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more Efficient, Horizontal Trim. The Travel XT Wing Series is built upon the Legendary Toughness of Super-Fabric Brand Technology, a Technical Fabric Resistant to Cuts, Pinches and Abrasions. This Unique Material has been created with a Base Fabric Overlaid with Tiny Guard Plates, this Proprietary Armored Surface, along with Material Science and Strategic Geometric Patterns, transforms ordinary fabric into Super-Fabric Brand Materials. The material maintains its Flexibility and Breathability, yet keeps Sharp Objects from Penetrating.

Dive Rite has married Super-Fabric with a 1,000-Denier Cordura Inner Shell to create an Armor-Clad Outer-Bag that is Impervious to Damaging Pinches and Cuts. The Travel XT line's Toughness is further enhanced with a Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder. The Travel XT has Urethane Flanges Welded in place which makes it easy to switch out Corrugated Hose and Over-Pressure Relief Valves without tools. The Travel XT comes with either a 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator and a Low Pressure Hose for attachment to the First-Stage Regulator. Wing is equipped with a Lower Left Front Over-Pressure Relief/Dump Valve. A Set of Marine-Grade 316-Stainless Steel Grommet Mounting Holes are used to attach Wing to Harness and/or Singles Mounting Plate. The Travel XT measures approximately (H x W) 21.5" x 15" (54.6 x 38.1 cm) deflated and weighs 2.4 lbs (1.1 kg). The Travel XT Wing comes with Owner Manuals, is covered by Dive Rite's Limited Lifetime Warranty and is proudly made in the USA.

Warranty Information

This product has a limited warranty of 12 months.


Dive Rite Travel XT Wing Features

  • Lightweight Wing Designed for Single-Tank, Warm Water Diving
  • Small-Profile Ideal for Travel
  • Lift: 25 lbs (11.3 kg)
  • No More than 16 lbs (7.26 kg) of Additional Weight
  • Accommodate One 80 cubic feet (12 liter) Tank
  • Donut-Shape Provides Greater Stability and Control in Water
  • Donut-Style 360 Degree Wings
  • 360 Degree Wings Promote Even-Volume of Inflation On-Top, Sides and Bottom
  • Improves Buoyancy Control and Promotes More Efficient, Horizontal Trim
  • Legendary Toughness of Super-Fabric Brand Technology
  • Technical Fabric Resistant to Cuts, Pinches and Abrasions
  • Base Fabric Overlaid with Tiny Guard Plates, Proprietary Armored Surface
  • Flexible and Breathable, Yet Sharp Objects from Penetrating
  • Dive Rite Married Super-Fabric with 1,000-Denier Cordura
  • Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder
  • Urethane Flanges: for Easy Switching Out of Corrugated Hose and Over-Pressure Relief Valves w/o Tools
  • 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator
  • Low Pressure Hose
  • Over-Pressure Relief/Dump Valve
  • Set of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
  • Dimensions (Deflated): Approximately 21.5" x 15" (54.6 x 38.1 cm)
  • Weight: 2.4 lbs (1.1 kg)
  • Owner's Manual
  • Limited Lifetime Warranty
  • Made in the USA

Dive Rite Travel XT Wing Specifications

Bc Body
Wing, Back Inflator
Buoyancy Bag
25 Lbs (11.3 Kg)
Valves
Over-Pressure Relief/Dump Valve
Oral Inflator
Dive Rite Power Inflators
Materials
Outer Bag: 1,000-Denier Cordura, Bladders: 210-Denier Nylon Urethane Laminated, Grommets: 316-Stainless Steel
Weight
2.4 Lbs (1.1 Kg)
Available in the Following Sizes:
12" With Elbow, 16" With Elbow
Weight [with packaging]
12" With Elbow: 2.65 lb,
16" With Elbow: 2.8 lb
Available in the Following Sizes:
12" With Elbow, 16" With Elbow
Weight [with packaging]
12" With Elbow: 2.65 lb,
16" With Elbow: 2.8 lb
Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Shopper  Is the pull dump available on both the 12" and 16" inflator? I want a shorter hose, but also a pull dump. I saw on Dive Rite's website that it was an option but only by request. Can I get this from LeisurePro?
Ben T  The 12" does not come with a rapid dump. The manufacturer does make it but only by special order. We do not stock it with the rapid dump currently and don't place special orders for this bladder. Technical divers prefer no rapid dump and just solid elbows. One less thing that can leak or go wrong. As a sport diver their is no reason why you cant have a rapid dump on a 12" hose.
Shopper  Does the 12" inflator hose also have the rapid-dump where you pull it away from the chest, as opposed to holding it vertical and deflating with the button? Or is that option only available on the longer 16" model? According to Dive Rite's website, the 12" pull dump is available but only by request. Can it be requested via LP? And, also, is there any reason why it would be a bad idea to have a pull dump on a shorter hose? Wondering if there is something other than cost driving what's standard for the 12" hose.
Ben T  The 12" does not come with a rapid dump. The manufacturer does make it but only by special order. We do not stock it with the rapid dump currently and don't place special orders for this bladder. Technical divers prefer no rapid dump and just solid elbows. One less thing that can leak or go wrong. As a sport diver their is no reason why you cant have a rapid dump on a 12" hose.
top
Share this item: