About Dive Rite Travel XT Wing
The Travel XT is a lightweight wing designed for single tank, warm water diving. Dive Rite's Travel Series of wings are small profile and ideal for travel and divers who wear a minimal amount of weight. At 25 lbs (11.3kg) of lift, the Travel XT can accommodate one 80 cubic feet (12 liter) tank with no more than 16 lbs (7.26kg) of additional weight.
With its donut-shape, the Travel XT Wing provides greater stability and control in the water. Donut-style or 360-degree wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim. The Travel XT Wing Series is built upon the legendary toughness of Super-Fabric Brand Technology, a technical fabric resistant to cuts, pinches and abrasions. This unique material has been created with a base fabric overlaid with tiny guard plates, this proprietary armored surface, along with material science and strategic geometric patterns, transforms ordinary fabric into Super-Fabric Brand Materials. The material maintains its flexibility and breathability, yet keeps sharp objects from penetrating.
Dive Rite has married Super-Fabric with a 1,000-Denier Cordura inner shell to create an armor-clad outer bag that is impervious to damaging pinches and cuts. The Travel XT line's toughness is further enhanced with a heavy-duty, radio frequency (RF) welded 210-denier nylon urethane laminated bladder. The Travel XT has urethane flanges welded in place which makes it easy to switch out corrugated hose and over-pressure relief valves without tools. The Travel XT comes with either a 16" or 12" (40.6cm or 30.5cm) elbowed Inflator and a 3/8" threaded low-pressure hose for attachment to the first-stage regulator. Wing is equipped with a lower left front over-pressure relief/dump valve. A set of marine-grade 316-stainless-steel grommet mounting holes are used to attach wing to harness and/or singles mounting plate. The Travel XT measures approximately (H x W) 21.5 x 15" (54.6 x 38.1cm) deflated and weighs 2.4 lbs (1.1kg). The Travel XT Wing comes with owner's manual, and is proudly made in the U.S.A.
Warranty Information
This product has a limited warranty of 12 months.
http://www.diverite.com/service/warrantypolicy/
800-495-1046
Dive Rite Travel XT Wing Features
- Travel XT Wing:
- Lightweight Wing Designed for Single-Tank, Warm Water Diving
- Small-Profile Ideal for Travel
- Lift: 25 lbs (11.3kg)
- No More than 16 lbs (7.26kg) of Additional Weight
- Accommodate One 80 cu. ft. (12 liter) Tank
- Donut-Shape Provides Greater Stability and Control in Water
- Donut-Style 360-Degree Wings
- 360 Degree Wings Promote Even-Volume of Inflation On-Top, Sides & Bottom
- Improves Buoyancy Control & Promotes More Efficient, Horizontal Trim
- Legendary Toughness of Super-Fabric Brand Technology
- Technical Fabric Resistant to Cuts, Pinches and Abrasions
- Base Fabric Overlaid with Tiny Guard Plates, Proprietary Armored Surface
- Flexible and Breathable, Yet Sharp Objects from Penetrating
- Dive Rite Married Super-Fabric with 1,000-Denier Cordura
- Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder
- Welded In-Place Urethane Flanges:
Easy to Switch-Out Corrugated Hoses & Over Pressurization Valves
No Tools Required - 16" or 12" (40.6cm or 30.5cm) Elbowed Inflator
- Low Pressure Hose
- Over-Pressure Relief/Dump Valve
- Set of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
- Dimensions (Deflated): Approximately 21.5 x 15" (54.6 x 38.1cm)
- Weight: 2.4 lbs (1.1kg)
- Owner's Manual
- Made in the USA