Dive Rite : Picture 1 regular $280.00

About Dive Rite Voyager EXP Wing

The Voyager EXP is an outstanding Wing for Single-Tank Diving with its Low-Profile, Donut-Shape Design. Streamlined Side Panels and a Minimalist, Oval Shape creates a Higher-Lift Wing that remains Unobtrusive instead of Bulky. This is ideal for divers with larger statures or those who dive in cold water and/or require more weight. The Voyager accommodates up to one 95 cubic feet (15 liter) Tank and provides 35 lbs (15.8 kg) of Lift.

With its Donut-Shape, the Voyager Wing provides greater Stability and Control in the Water. Donut-Style or 360 Degree Wings promote an Even Volume of Inflation On-Top, Sides and Bottom, which Improves Buoyancy Control and promotes a more Efficient, Horizontal Trim. The Dive Rite Voyager EXP Wing is manufactured from Value-Driven and Durable 1680-Ballistic Nylon EXP Material that is Resistant to Tears and Abrasions. The Voyager EXP line's Toughness is further enhanced with a Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder.

The Voyager EXP has Urethane Flanges Welded in place which makes it easy to switch out Corrugated Hose and Over-Pressure Relief Valves without tools. The Voyager EXP comes with either a 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator and a Low Pressure Hose for attachment to the First-Stage Regulator. Wing has a Lower Left Front Over-Pressure Relief/Dump Valve. Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes are used to attach the Wing to the Harness and Set Divers Trim. The Voyager EXP measures approximately (H x W) 22" x 19" (55.8 x 48.3 cm) deflated and weighs 2.8 lbs (1.27 kg). The Package comes with Owner Manuals and is covered by Dive Rite's Limited Lifetime Warranty. Transpac Package is proudly made in the USA.

Warranty Information

This product has a limited warranty of 12 months.


Dive Rite Voyager EXP Wing Features

  • Ideal for Divers with Larger Statures or that Dive in Cold Water and/or Require More Weight
  • Lift Capacity: 35 lbs (15.8 kg)
  • Accommodates Up to one 95 cubic feet (15 liter) Tank
  • Donut-Shape Provides Greater Stability and Control in Water
  • Donut-Style 360 Degree Wings
  • 360 Degree Wings Promote Even-Volume of Inflation On-Top, Sides and Bottom
  • Improves Buoyancy Control and Promotes More Efficient, Horizontal Trim
  • Outer Bag: Durable 1680-Ballistic Nylon EXP Material
  • Resistant to Tears and Abrasions
  • Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder
  • Urethane Flanges: for Easy Switching Out of Corrugated Hose and Over-Pressure Relief Valves w/o Tools
  • 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator
  • Low Pressure Hose
  • Over-Pressure Relief/Dump Valve
  • Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
  • Dimensions (Deflated): Approximately (H x W) 22" x 19" (55.8 x 48.3 cm)
  • Weight: 2.8 lbs (1.13 kg)
  • Owner's Manual
  • Limited Lifetime Warranty
  • Made in the USA

Dive Rite Voyager EXP Wing Specifications

Bc Body
Wing, Back Inflator
Buoyancy Bag
35 Lbs (15.8 Kg)
Valves
Over-Pressure Relief/Dump Valve
Oral Inflator
Dive Rite Power Inflator
Materials
Outer Bag: 1,680-Ballistic Nylon, Bladder: 210-Denier Nylon Urethane Laminated, Grommets: 316-Stainless Steel
Weight
2.8 Lbs (1.27 Kg)
Available in the Following Sizes:
12" With Elbow, 16" With Elbow
Weight [with packaging]
12" With Elbow: 2.5 lb,
16" With Elbow: 2.6 lb
Mfr #
SKU
DIVBC4700

Voyager EXP Wing Customer Reviews

Write a Review

REVIEW SNAPSHOT®

by PowerReviews
Dive Rite Voyager EXP Wing
 
1.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 1 customer

Displaying review 1

Back to top

 
1.0

Not usual Dive Rite Quality!

By Reefrat

from Texas

About Me Advanced

Pros

    Cons

    • Poor Construction

    Best Uses

      Comments about Dive Rite Voyager EXP Wing:

      I have been using various Dive Rite gear for years without any problems so this wing has been a bit of a surprise. Bought in Feb 2015 from Leisurepro but not used until July ( a week ago) when I took it on a dive vacation to Turks and Caicos. It was used on 4 easy recreational dives, when I surfaced on the 4th dive and inflated it at the surface the seam on the left side tore along the stitching for about 4" exposing the bladder.
      This can only be poor quality construction and I contacted Leisurepro- however they say that the wing was purchased more than 120 days ago so I have to contact the manufacturer. Meantime I am still on vacation with a wing that I do not want to use and a borrowed BCD.
      Motto of the story:
      Make sure you use any Leisurepro purchased equipment well within the 120 days or you are on your own!

      • Type Of Diving:
      • Warm Water Diving
      • Male/Female:
      • Male
      • Was this a gift?:
      • No

      Comment on this review

      Displaying review 1

      Back to top

      Q&A

      Questions & Answers Powered by TurnTo®

      Questions about this item:

      JOSE C J  Could you tell me, what is use to the 12 inch corrugated hose? and the 16 inch?
      SHANNON S  Not sure the purpose of the very short 12" hose, it's way to short for my comfort. I'm 6'4" and like the inflator to terminate at the breast level, the 16" was perfect. I used a small bungee loop to secure it to a D ring on my shoulder strap.
      JOSE C J  Could you tell me, what is use to the 12 inch corrugated hose? and the 16 inch?
      SHANNON S  Not sure the purpose of the very short 12" hose, it's way to short for my comfort. I'm 6'4" and like the inflator to terminate at the breast level, the 16" was perfect. I used a small bungee loop to secure it to a D ring on my shoulder strap.
      JOSE C J  Could you tell me, what is use to the 12 inch corrugated hose? and the 16 inch?
      SHANNON S  Not sure the purpose of the very short 12" hose, it's way to short for my comfort. I'm 6'4" and like the inflator to terminate at the breast level, the 16" was perfect. I used a small bungee loop to secure it to a D ring on my shoulder strap.
      top
      Share this item: