Scroll ←→ for more. Tap to zoom.
Dive Rite Classic EXP Wing

Dive Rite Classic EXP Wing Features

What's in the box: Classic EXP Wing with LP Hoses and Owner Manual

The Classic EXP is an Adjustable Lift Wing, sporting an Optional Gusset Control System Cord that can be used to further streamline the Wing for Wreck Diving Penetrations or Smaller Size Doubles. The Classic EXP offers 65 lbs (27.2 kg) of Lift, accommodating two 104 cubic feet (17-liter) Back Mounted Cylinders and two 80 cubic feet (11- liter) Stage Bottles. The Classic EXP is for use solely with Double Tanks.

The EXP Wing Series is built with Value-Driven and Durable 1680-Ballistic Nylon EXP Material that is Resistant to Tears and Abrasions. The EXP line's Toughness is further enhanced with a Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder. The EXP has Urethane Flanges Welded in place which makes it easy to switch out Corrugated Hose and Over-Pressure Relief Valves without tools.

The EXP comes with either a 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator and a Low Pressure Hose for attachment to the First-Stage Regulator. Wing has a Lower Left Front Over-Pressure Relief/Dump Valve. Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes are used to attach the Wing to the Harness and Set Divers Trim. The XT measures approximately (H x W) 24" x 26" (60.9 x 66 cm) deflated and weighs 3 lbs (1.3 kg). The Classic EXP Wing comes with Owner Manual and is covered by Dive Rite's Limited Lifetime Warranty, and is proudly made in the USA.

Key Features

  • Accommodates: Two 104 cu. ft (17-liter) Back Mounted Cylinders and Two 80 cu. Ft. (11- liter) Stage Bottles
  • Double Tank Wing System
  • Outer Bag: Durable 1680-Ballistic Nylon EXP Material
  • Resistant to Tears and Abrasions
  • Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder
  • Urethane Flanges: for Easy Switching Out of Corrugated Hose and Over-Pressure Relief Valves w/o Tools
  • 16" or 12" (40.6 or 30.5 cm) Elbowed Inflator
  • Low Pressure Hose
  • Over-Pressure Relief/Dump Valve
  • Lift: 65 lbs (27.2 kg)
  • Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes
  • Dimensions: Approximately (H x W) 24" x 26" (60.9 x 66 cm)
  • Weight: 3 lbs (1.3 kg)
  • Owner's Manual
  • Limited Lifetime Warranty
  • Made in the USA

Warranty Information

This product has a limited warranty of 12 months.