What's in the box: Rec EXP Dual Bladder Wing with 2 LP Hoses and Owner Manual
The Dive Rite Rec EXP Dual Bladder Wing is designed for the Technical Diver who requires a Back-Up Source of Buoyancy Inflation. These Wings offer the same Lift Capacity of their Single Bladder Counterpart, yet have a Second Bladder with a Dedicated Inflator Hose and OPV. The Rec EXP Dual Bladder Wing is one of Dive Rite's Innovative Lines of 360 Degree, Donut-Style Wings. Donut Wings tend to provide Greater Stability and Control in the water, Improving Diver Buoyancy and Trim. The Rec EXP is shorter than Div Rite's traditional Rec Wing, which means it now fits a Wider Range of Diver Statures; whereas Dive Rite's traditional Rec Wing is best Suited for Tall Divers or Divers who require more Buoyancy at the Waist.
A Hybrid Wing, the Rec EXP can be worn on Single or Double Tanks making it one of Dive Rite's most popular Wings. When Diving with a Single Tank, the Rec EXP Wing has 2 Clips on each side attach to D-Rings on the Back-Plate, keeping the Wing Close to the Diver's Body. This avoids the Taco" effect of the Wing Wrapping around the Tank, Away-from-the-Diver, which Diminishes Buoyancy Control.
At Full Lift Capacity, the Rec EXP has 45 lbs (20.4 kg) of lift and can accommodate Two 85 cubic feet (12 liter) Back Mounted Cylinders. The Rec EXP Wing Series is built with Value-Driven and Durable 1680-Ballistic Nylon EXP Material that is Resistant to Tears and Abrasions. The Rec EXP line's Toughness is further enhanced with a Heavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated Bladder. The Rec EXP has Urethane Flanges Welded in place which makes it easy to switch out Corrugated Hose and Over-Pressure Relief Valves without tools. The Rec EXP comes with either a 16" or 12" (40.6 or 30.5 cm) Elbowed Primary Inflator, a 12" (30.5 cm) Back-Up Inflator and two Low Pressure Hose for attachment to the First-Stage Regulator. Wing is equipped with 2 Over-Pressure Relief/Dump Valve. Two Sets of Marine-Grade 316-Stainless Steel Grommet Mounting Holes are used to attach the Wing to the Harness and/or Double Tanks and Set Divers Trim. The Rec EXP measures approximately (H x W) 24" x 23" (60.9 x 58.4 cm) deflated and weighs approximately 4.12 lbs (1.87 kg). The Rec EXP Dual Bladder Wing comes with Owner Manuals and is covered by Dive Rite's Limited Lifetime Warranty. Rec EXP Wing is proudly made in the USA.
This product has a limited warranty of 12 months.