Cressi Ellipse AC10 Regulator

Cressi Ellipse AC10 Regulator Features

What's in the box: First and Second Stage Regulators and Low Pressure Hose

The Cressi Ellipse AC10 Regulator consists of the Ellipse 2nd stage and a Balance Piston 1st stage Regulator The Ellipse uses an elliptical housing for the second-stage regulator which is made from hi-tech polymers All the internal components of the Ellipse are a dependable high performance downstream valve design Once the valve has open the air is channeled by injection to the liquid silicone mouthpiece creating a venturi-effect enhancing the performance On the top of the housing there is a flow deviator that acts on the Venturi effect, with dive/pre-dive switch

The AC10 1st Stage Regulator is a balanced high performance flow-through piston design that has been produced by Cressi for many years The AC10 delivers a constant performance regardless of the diver's depth or the amount of cylinder air pressure With the continuous reviews and improvements over the years all the air passages inside the first stage have been completely redesigned and considerably increased so as to give the excellent performance that AC10 offers today Equipped with 5 low-pressure ports on a swivel turret and two high-pressure ports on opposite sides of the body allows excellent hose routing

The Cressi Ellipse AC10 Regulator is commonly used for Warm Water and more. The Cressi Ellipse AC10 Regulator is popular because customers like the following qualities of the Cressi Ellipse AC10 Regulator: Comfortable, Effortless breathing.

Key Features

  • 2nd Stage Features:
  • Ellipse Primary Second-Stage
  • Hi-Tech Polymer Housing
  • Liquid Silicone Mouthpiece
  • High Performance Design
  • Venturi Dive/Pre-Dive Switch
  • 1st Stage Features:
  • The AC10 first stage balanced piston
  • 2 high pressure and 5 low pressure ports
  • L. P. Ports on Swivel Turret
  • Improved performance
  • Flow-through Piston
  • Specifications:
  • - Supply pressure (INT connection) 0 to 3,400 psi (0-232 bar)
  • - Supply pressure (DIN connection) 0 to 3,000 psi or 4,350 psi (0-200 or 0-300 bar)
  • - Calibration pressure 138 to 145 psi (9.5-10 bar)
  • - Calibration adjustment range =/- 7 psi (+/- 0.5 bar)
  • - Air supply 2800 l/min (*)
  • - High pressure ports (HP) 2
  • - Low pressure ports (LP) 5
  • (*) values measured at LP port with second stage connected and 2,175 psi (150 bar) pressure in the tanks.

Warranty Information

This product has a limited lifetime warranty.

www.cressisubusa.com
(800) 338-9143

Q&A