You started diving with yoke style cylinder valves, but you feel the higher cylinder pressure available with DIN cylinders will be an advantage to your style of diving. Well this Adapter will allow you to do just that, shed the yoke and increase bottom time with this 300 bar (4350 psi) DIN conversion for Cressi MC5/MC9 First Stage Regulators.
Also, Scuba Divers who Travel Overseas will want to have a DIN Adapter in order to Adapt to the tanks available at the local dive sites. The Adapter allows you to easily convert your First Stage, if required, so you can use your own gear rather than rental gear! DIN Adapter is made from Durable and Corrosion Resistant Chrome Plated Brass. Kit is covered by a Limited Lifetime.
This product has a limited warranty of 24 months.
Reviewed by 1 customer
Displaying review 1
Comments about Cressi DIN Adapter for MC5/MC9 Regulators:
This will convert a yoke first stage to DIN. Don't attempt it without the right tools. If you plan to do it yourself, make TOOL - an adjustable wrench will mess up the yoke nut. I fabricated a 1" socket, 3/8 drive by cutting it much shorter and chamfering deeply with a die grinder. the 3/8 drive will slip though the threaded yoke. Further, get a bench vise to hold bolts which you will buy and thread into a LP port. This is all just to safely get off the yoke nut. Next, make sure the O-rings go in the right spots with a little silicone grease, and torque just right (this is hollow brass, but you don't want it loose either).
In retrospect, it's best to buy a DIN reg and use the easy on/off yoke adapter. But if you want yours DIN, this is really a more permanent conversion.