The Cressi Mini-Console 2 is a Small Compact Console that houses the Cressi Mini-Manometer Pressure Gauge and a new, Small, Analog Depth Gauge. Both Gauges are High Quality Instruments with Chrome Plated Brass Cases and the Depth Gauge has a Diaphragm Membrane Actuated Function. Both Gauges have a Large Circular Easy-to-Read Scales. The Instruments are Housed in a Small, Modern Shaped Console Boot, made from Polycarbonate and Desmopan, (a Thermoplastic Polyurethane) two materials that guarantee Protection from Shocks, Scratches and which, at the same time, is Very Light. At the end of the Console, slightly to the sides, there are two Eyelets for Fastening the Instrument to the BCD or Harness with a Clip or Lanyard so that it does not hang down with the risk of catching and damaging the Environment or the Instruments.
The Luminescent Face of the 70 meters Depth Gauge, the first 12 meters of Depth Readings are in 3 Meter Increments, (which correspond to the area of decompression stops), and are Widely Spaced for Ease-of-Reading. For At-a-Glance Monitoring of Depth, the Face-is-Divided into 3-Different Colored Zones: Green up to 20 meters, Light-Blue from 20 to 40 meters and Red from 40 meters to the end of the scale. The Instrument has a Maximum Depth Indicator that Stops on the Maximum Depth Reached during the Dive. This Function is Extremely Handy for Logging of Dive Information.
The Mini-Manometer Pressure Gauge Luminescent Dial reads from 0 to 350 bars. Like the Depth Gauge the Instruments Face is divided into three different Colored Zones: For At-a-Glance Monitoring of Air the area from 50 bars and below is Highlighted-in-Red with a Solid-Bar and Red Stripes. If Gauge is used on Deeper Dives, the Red-Scale Extends and fades to 100 bars, this provides for Added-Reserve-Air Indication required at Greater-Depths. From 50 bars to approximately 200 bars is Green and from 200 bars to end of scale is Blue.
The Front Glass Lens is made to act as a Pressure Relief Valve In the event of a sudden Increase-in-Pressure inside the Instrument, the Glass-Rises-Slightly, allowing the Excess-Pressure to Escape Pressure Gauge is equipped with a 7/16" Threaded High Pressure Hose. The Instrument Console is made in Italy and is covered by a 12 month limited warranty.
This product has a limited warranty of 12 months.
Reviewed by 1 customer
Displaying review 1
Comments about Cressi Mini 2 Gauge Console (Metric):
Nice, compact good looking gauge.
The attachment to retractors might not be elegant - it has only small holes at the top end of the gauge, so I used a big o-ring to attach it to a retractor and then to my BCD, and that does not look pretty.
Make sure you order house protector separately.