Featured Reviews
See all 72 reviewsGreat product!!! I'd buy it again.
By Mike
Great product. I wish that I would have found them sooner.
All fins should have these.
By RICHARD M.
These straps make donning and removing fins a lot easier. Great when boat diving and you have to put your fins on your wrist when exiting without fussing with strap latches. Stainless steel should be more dependable than rubber straps. They look as functional as they are.
EZ Spring Strap for Scuba Pro Twin Jet Fins, Black Features
- Corrosion Resistant Stainless Steel
- Comfort Grip Puller
- Easy to Install
- Rubber Comfort Puller Provides Cushion-Between-the-Spring-and-Divers Heel
- Large Grip to Aid in Pulling Fin Straps On-and-Off
- Springs Automatically Compensates for Different Size-Feet and Boots
- Depth Compensating: Compress-to-Changes in Thickness of Boots
- 4 Sizes: Small, Medium, Large or X-Large
- Small: 6" (15.3 cm), Medium: 7" (17.8 cm), Large: 8" (20.3 cm), X-Large: 9" (22.9 cm)
- Fits Scuba Pro Twin Jet Fins with Quick-Release Buckles
- Limited Lifetime Warranty
Questions & Answers
Questions about this item:
Bob N
What is the actual length of the straps for large, medium and small?
I purchased the large which measures 9-inches for my scuba pro fins but it's too big. Will not stay on.
YAN G
Actual size are listed in the Details of the item:
Small: 6" (15.3 cm)
Medium: 7" (17.8 cm)
Large: 8" (20.3 cm)
X-Large: 9" (22.9 cm)
In order to find the correct size, you need to measure around the back of your heel (while foot is in foot pocket of fin) from one attachment point of the strap to the other. Then subtract one inch and order the appropriate size strap.
Shopper
I need both replacement straps and clips for my scubapro twin jet fins. The photo shows both strap and buckle/clips but the description does not mention the buckle/clips. Do they both come or only the strap? Gail
DAVID B
They come exactly as picture, with the male clip ends only. If you also need to replace the female clips for thee fin, that's a separate purchase.
MIKE V
What you see if what you get. The springs, heel pad, and the male part of the buckle.
DAVID S
When I got mine the straps included the clips as shown in the photo.
JOE T
just the straps come with this .I really do recommend these, but you will need new clips apparently separately
THOMAS G
Remove original fin straps and insert replacement straps into fin clips. I've been using these for many years without any problems. Good fast fin removal when you're hanging onto a dive ladder in rough seas.
CHRIS S
The male side of clips come with the straps.
DONALD A
They come as is. No clips included.
IGOR Z
You will get exactly what you see on the picture
MICHAEL P
They come exactly as pictured. They do not include the "female" portion of clips that are attached to the fin. I'm sure you will like them.
STEVE C
Yes, they come with the clips pictured, but make sure your fins have the correct clips on them as well.. the correct fin clips will swivel on your fin, if they don't, and are locked into one position, you'll need to replace those as well..
MATTHEW G
Do these straps fit the Scubapro Twin Jet Max fins. Your add states "Fits Scuba Pro Twin Jet Fins with Quick-Release Buckles"? The description in quotes is missing the word "Max".
MANNY M
I bought these for my Twin Jet fins. I do not have the Max, so I can not say if they fit yours or not. Btw, I love them.
Manny
DAVID S
I am using these with Scuba Pro "twin Jet" Open Heel Split fins. You just unclip the quick release adjustable straps and replace with the spring strap. It was a worthwhile investment. Make it easier to remove your fins when getting out of the water onto the dive boat or putting them on once in the water for a beach dive.
ANTHONY C
No the max fin straps are different
RANDOLPH T
If your fins have round knobs I would think they be fine.
YAN G
No, they do not fit the Twin Jet Max fin. They are for the original twin jet as the title describes.
Philip L
How do these attach to the fins? The last set of aftermarket springs I had fell off because it they had to be installed by bending open the attachment staples on the boot and it was impossible to re-bend them completely shut..
MARK E
They just snap in. I have medium twin jet fins and found the large spring strap was more comfortable. Also if you ever need to re shut the staple on the boot use a vice. It will work very well.
LISTON C
The spring straps plug into a plastic receiver on the fin much like a buckle or clip on a baby seat. They are secure and I have never had one come loose in the 8 or so years I have been using them.
TERRY G
This particular strap is made for ScubaPro Twinjet clips, it will NOT attach to any other quick-release clip. There are other ones for other brands (Mares, etc.), but only get this one if you have Twinjets.
DAVID F
If you have ScubaPro fins, these just fit in the spring loaded attachment the same way the scuba pro rubber straps fit.
RYAN B
They replace the OEM straps by simply snapping in the original snap on the fin.
RICHARD F
I have a medium twin jet fin , I wear a size 9 deep see caribbean low top heavy duty dive boots caribean boot. 3mm . With 5 mm inner sole. What size should i buy?
STUART P
You will need a large. I initially tried a medium and had to send them back.
MICHAEL S
Same size as your fin
RICHARD P K
Hi!
Put your boot and fin on and adjust your current strap to normal adjustment. Using a tape measure, measure strap length between buckles and around heel, then see sizing chart and order correct size, rounding up in size as needed. Chart is accurate and if in doubt, order next size up.
Good luck!!
DAVID B
I have large fins and bought large straps. I wear a 10 boot and they are a little tight but perfectly useable. If you like a looser fit, I'd try the large straps on the medium fin. You can always return them for the smaller size just be careful with the packing materials.
I don't know the age of your fins but mine were older and the buckles had to be modified with a dermel tool to fit the older female clip on the fin. The release pull had to be squared off and some excess materials trimmed off. It was not difficult to do. Only took about half and hour to trim.
Hope this helps.
CHRIS S
I would get a middle size like medium
STUART P
I use a medium in the fin and wear a 9 Deep Sea with a narrow foot. I ordered medium springs and had to send them back for a large.
Share this item: