About Dive Alert Signaling Device
New look, slick re-design of the original, audible surface signal. Dive Alert is a specially designed, small, lightweight air horn that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator, breathable/inflator and buoyancy compensator. Installation is easy and only takes a moment. Why have Dive Alert? What would you do in a diving emergency if you needed to get the attention of the pick-up boat or someone else on the water's surface? Before Dive Alert Scuba divers had relied on whistles or a SMB (surface marker buoy) as their only signaling devices in such an emergency. But if the diver is disabled and can't blow into a whistle (or deploy the SMB) the whistle makes no sound at all. Or if the boat operator is not looking in the direction of a diver with a SMB deployed (if the diver was able to even deploy the SMB) the diver goes unnoticed.
Equally frustrating (and dangerous), if a diver needs to attract the attention of someone who is too far away to hear the whistle, the whistle is of no help. In contrast, Dive Alert enables divers, at the mere touch of a button, to generate a blast of sound that can be heard up to a mile (1.6 km) away! There are three different models available; one for approximately 85% of standard power inflator mechanisms model DB1. There are several breathable/inflator mechanisms that require a larger coupling for a higher flow of air so there are two models to accommodate them. The model DB2 and the model DB3 (see list below).
Installation is easy and takes only a moment. Dive Alert does not require any modification of your other equipment, and it does not interfere in any way with its normal operation. When you need to get someone's attention on the water's surface, you simply press a button and Dive Alert uses a small amount of air from your scuba tank to make a piercingly 132db loud sound; even as little as 100psi will give you a full-throated screech. The Dive Alert is manufactured with a durable impact resistant injected molded thermoplastic body, stainless-steel horn diaphragm and the actuator valve and quick-disconnect/connect coupling are chrome plated brass.
DB1:
Fits All Standard Inflators
Aqua Lung i3
DB2:
SeaQuest AirSource 1 & 2
Zeagle Octo-Plus
Oceanic Air XS
Mares Air Control Air Source 3 QD
DB3:
ScubaPro Air 2
TUSA Duo-Air
Atomic SS1
Sherwood Gemini
Zeagle Octo-Z
Warranty Information
This product has a limited warranty of 12 months.
858-715-2500
Dive Alert Signaling Device Features
- Signaling Device:
- Surface Only Signaling Device
- New Look, Slick Re-Design
- Audible Surface Signal
- Small, Lightweight Air Horn
- Uses BCD Quick-Connect/Disconnect Hose Couplings
- Integrated Part of Power Inflator, Breathable/Inflator
- Installation: Easy & Only Takes-A-Moment
- Why Have Dive Alert?
Excellent Signal Device for Diving
Must-In-Diving Emergencies
Being Heard, Not Hoping to-Being-Seen
Louder than Whistle
Safer than SMB
Help: Only-A-Push-of-A-Button-Away - Can-Be-Heard 1-Mile (1.6 km) Away!
- Piercingly 132db Loud Sound
- 100 psi (6.9 bars) Gives Full-Throated Screech
- Construction:
Body: Durable Impact Resistant Injected Molded Thermoplastic
Horn Diaphragm: Stainless-Steel
Actuator Valve & Quick-Disconnect/Connect Coupling: Chrome-Plated Brass - Three Models Depending-On Power Inflator, Breathable/Inflator
- DB1:
Fits All Standard Inflators
Aqua Lung i3 - DB2:
SeaQuest AirSource 1 & 2
Zeagle Octo-Plus
Oceanic Air XS
Mares Air Control Air Source 3 QD - DB3:
ScubaPro Air 2
TUSA Duo-Air
Atomic SS1
Sherwood Gemini
Zeagle Octo-Z