how do you install the band on the gun?
taking a closelook to the front end of your gun, you´ll see a plastic loop installed on the nose of it, this loop isn´t completly closed there is a gap there, slind the wire part of your speargun band into the gap, and there we go! Your rubber band is installed.
their will be a slot on the muzzle of the gun the you can separate with a knife or other slender tool to slide the metal wish bone through.
You just push it to the front end hole (under the spear). The plastic ring is flexible and is cut on one of the points it attaches to the gun.
LARRY C. S
If you examine the muzzle of your gun you will notice an opening or slot. Carefully pry this open and slide/force the wire wishbone in between them. Change your bands if they look worn or cracked. Keep them out of direct sunlight as much as possible. They should be changed once a year.
I tried to include a picture for your convenience but the format that leisurepro uses will not allow it.
Thanks Larry I appreciate the response. I get it now.
Push wirepart true the cuts in the mizzle and rotate ruber arround.