About Cressi Open Water Package
The XS2/AC2 Regulator is a dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. The 1'st stage has 1 HP port and 4 LP ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator.
The XS2 Compact 2'nd stage housing is made of durable non-corrosive hi-tech polymers & has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2'nd stage comes w/a flow deviator that acts on the Venturi effect, w/dive/pre-dive adjustment function. Regulator comes w/a comfortable silicone mouthpiece. The XS2 Compact AC2 Regulator weighs 35 oz. (994 g) w/hose & comes w/an owner's manual. Regulator is certified to EN250/2000 standards and is made in Italy.
The XS Octopus is a lightweight, high performance 2'nd stage regulator. The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. The XS Octopus has a dependable downstream demand valve mechanism for reliable performance. The XS Octopus is equipped w/a 33" (84cm) 3/8" threaded hose, and yellow front cover for easy identification in an out-of-air-emergency. The regulator has a soft & comfortable liquid silicone mouthpiece & the housing is made of durable impact resistant hi-tech polymers. The regulator weighs 7.27 oz. (206 g) w/o hose & 12.7 oz. (359 g) w/hose. Regulator is certified to Annex B EN 250.2014 standards.
The Cressi Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. For at-a-glance monitoring of air pressure. Instruments face is divided into three different colored zones: 600 psi & below highlighted in red w/a solid bar & red stripes. If gauge is used on deeper dives, red scale extends & fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approx. 3,000 psi is green & from 3,000 to end of scale is blue.
The front glass lens is made to act as a pressure relief valve. In event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. The instrument is housed in a small, modern shaped boot, made from polycarbonate & Desmopan, (thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches & which, at the same time, is very lightweight. The pressure gauge housing is durable chrome plated brass. The gauge boot has an attachment point for a clip or lanyard. Pressure gauge is equipped w/a 7/16" threaded high-pressure hose. Regulators and gauge are made in Italy.
The Puck Pro Wrist Computer uses Mares-Wienke RGBM (Reduced Gradient Bubbles Model) Algorithm. The RGBM uses micro-bubbles to prevent their formation. In over 10,000 real dives monitored by Dr. Bruce Wienke in the Los Alamos laboratories, the formation of micro-bubbles has been studied & evaluated to better understand the mechanism behind how micro-bubbles are formed during a dive. Today it is the most evolved algorithm for reducing the formation of micro-bubbles w/o compromising dive times.
The easy excess push button allows the diver to operate the computer in all conditions, even when wearing thick gloves. Navigating thru-the-computer programs is extremely simple & intuitive. There are 3-special function modes of air, nitrox & bottom time. The computer has a maximum depth display of 492' (150m), memory capacity of 36-hours, runs on a user-replaceable 3-volt CR2450 lithium-ion battery, power indicator, & back lighting for low light conditions. Computer also has a plan mode display, can be used in both imperial or metric units, fresh or seawater settings, residual nitrogen reset, option to exclude audible alarms & uncontrolled ascents, has an ascent rate indicator & is altitude adjustable to 12,100' (3,700m). The Puck Pro also has a watch, stopwatch, date & temperature functions, & the quartz clock movement can be set in a 12 or 24-hour format. The Puck has an optional USB interface for logging dives on your PC, (see SKU: MRSPCDL2) PC interface, and logbook function that includes dive profile graphs at 5-second sampling rate.
The computer knows that not all of us who dive are young & in peak condition, it address this w/precautionary program settings that allow individual adjustment to more conservative dive profiles if needed. When making multi-level, multiple dives during a single day or multiple dives over several days you can choose different setting levels to adjust your computer to a more conservative dive profile.
To offer an easy-to-read display Mares produced a wide computer mineral glass display, w/intense backlighting & high contrast. The computer featuring illuminated, oversized digits w/special attention paid to maximize the viewing angle, to eliminate angular distortion & to always grant the best readability. The computer comes w/a durable rubber wrist strap.
Designed as a rental BC for resorts & dive schools, the Start Pro gives students & divers the stability of a jacket style BC & convenience of weight integration. Dive operators will appreciate its bullet-proof construction using 1000/500 Denier Cordura & large, easily seen size markings on shoulder. Integrated gravity type weight pockets use rugged quick-release buckles for easy ditching of weight in an emergency & can hold up to 20 lbs. (9 kg) of soft or hard block lead weights. BC has 2-large cargo pockets w/hook & loop closures & D-rings for accessory storage & attachment. A rigid padded backpack & carry handle provide stability & ease of transport.
Buoyancy control is made easy w/3-exhaust valves & Cressi's Power Inflator that comes standard w/3/8" threaded low pressure quick-disconnect hose. With 2-over pressure relief/dump valves located on the left & right shoulders & a 3'rd lower valve on rear right of air cell. All 3 can be manually dumped 2 with pull cords & the other w/power inflator mechanism. Adjusting BCD to size is facilitated by the torso adjustable shoulders, sternum & waist straps. Straps are equipped w/squeeze-style side-release buckles for quick & easy donning/doffing. The Start Pro BC provides lift capacities of 29.2 lbs. to 45 lbs. (13.25 kg to 20.14 kg) depending on size. BCD has a single cam cylinder band and comes w/an owner's manual.
Heads will turn as you sport this great looking T-shirt by Leisure Pro. T-shirt is available in red and is 100% cotton. Front of shirt boasts a hard hat helmet logo with Leisure Pro and Born to Dive Print. The back of the shirt shows the Leisure Pro Diver Emporium Logo.
Warranty Information
This product has a limited warranty of 24 months.
800-338-9143
Cressi Open Water Package Features
- Cressi Open Water Package
- Complete Life Support Package
- Regulator w/Octopus, Analog Pressure Gauge, Wrist Computer & BCD
- Leisure Pro T-Shirt
- Cressi Regulators & Pressure Gauge Manufactured in Italy
- Includes Owner Manuals
- Cressi XS2/AC2 Piston Regulator:
- Weight: 35 oz. (994 g) with Hose
- Lightweight Jacketed 3/8" Threaded Low Pressure (LP) Hose
- Certified to EN250/2014 Standards
- First Stage: Cressi AC2 Regulator
- Construction: Durable Marine Grade Chromed Brass
- 1 HP Port 7/16" Thread
- 4 LP Ports 3/8" Thread
- Conical Filter
- Second Stage: Cressi XS2 Compact Regulator
- Reliable Downstream Demand Valve
- Comfortable Mouthpiece
- Construction: Polymer Plastic
- Dive/Pre-Dive Venturi Adjustment
- High Performance Design
- Lightweight, Second Stage Regulator
- Dependable Downstream Demand Valve Mechanism for Reliable Performance
- Venturi Dive/Pre-Dive Switch Prevent Free-Flow when Not in Use
- 33" (84cm) 3/8" Threaded Hose
- Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
- Housing: Hi-Tech Polymer Material for Strength and Durability
- Soft and Comfortable Liquid Silicone Mouthpiece
- Weight (w/Hose): 12.7 oz. (359 g)
- Certified to Annex B EN 250.2014 Standards
- Cressi XS Octopus:
- High Performance Design
- Lightweight, Second Stage Regulator
- Dependable Downstream Demand Valve Mechanism for Reliable Performance
- Venturi Dive/Pre-Dive Switch Prevent Free-Flow when Not in Use
- 39" (100cm) 3/8" Threaded Hose
- Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
- Housing: Hi-Tech Polymer Material for Strength and Durability
- Soft and Comfortable Liquid Silicone Mouthpiece
- Weight (w/Hose): 12.7 oz. (359 g)
- Certified to Annex B EN 250.2014 Standards
- Cressi Mini SPG (Imperial):
- Small and Compact
- 0 to 5000 psi Readout
- Chrome Plated Brass Case
- Unique Glass Lens Pressure Relief Valve
- Luminescent Color-Coded Dial
- Color Zones:
0 to 600 psi Highlighted-in-Red, Solid-Bar and Red Stripes
Deeper Dives Reserve; Red-Scale Extends and Fades to 1,300 psi
Safe Air Zone; 600 psi to Approximately 3,000 psi Green and 3,000 psi to Full Scale is Blue - 7/16' Threaded High-Pressure Hose
- High Quality Instrument
- Large Circular Easy-to-Read Scale
- Small, Modern Shaped Boot
- Boot Material:
Durable Polycarbonate & Desmopan
Desmopan; Thermoplastic Polyurethane - Protection from Shocks, Scratches & Very Lightweight
- Eyelet for Fastening Instrument to BCD or Harness with Clip or Lanyard
- Mares Puck Pro Wrist Computer:
- Super Intuitive, Easy-to-Use, and Full-Featured Computer
- Improving on Original Concept
- Larger-Display in Slimmer-Design
- Upgradeable Firmware and Multi-Gas Capability
- All-the-Bells-and-Whistles
- Precision Stopwatch
- Mares-Wienke RGBM (Reduced Gradient Bubbles Model) Algorithm
- Special Function Modes Air, Nitrox and Bottom Time
- Precautionary Programs Setting
- Plan Mode
- Backlighting
- Log Book
- Fresh Water/Sea Water Setting
- Residual Nitrogen Memory Reset
- User-Replaceable CR 2450 Lithium-Ion Battery
- Altitude Adjustable to 12,100' (3,700m).
- Memory Capacity 36 Hours
- Superior Display Readability, Mineral Glass Crystal
- 492' (150m) Depth Rating
- Power Indicators
- Audible Alarms
- Watch, Date and Temperature Displays
- 12/24 Hour Formats
- Two-Different Gas Mixtures During Single Dive
- Metric or Imperial Units of Measure
- Ascent Rate Indicator and Ascent Rate Digital Indicator
- Quartz Clock Movement
- Durable Rubber Wrist Strap
- Comprehensive Owner's Manual
- Optional USB Interface for Logging Dives on PC, (see SKU: MRSPCDL2)
- Cressi Start Pro BCD:
- Designed Primarily as Rental BC for Resorts and Dive Schools
- Strong Enough to Rent Bullet-Proof Construction for Recreational Divers
- Stability of a Jacket Style BC
- Convenience of Weight Integration
- 1000 and 500 Denier Cordura Construction
- Large, Easily-Seen Size Markings on Shoulder
- Integrated Gravity Type Weight Pockets:
Rugged Quick-Release Buckles
Easy Ditching of Weight in an Emergency
Weight Capacity: 20 lbs. (9 kg) of Soft or Hard Block Lead Weights - 2 Large Cargo Pockets w/Hook Loop Closures
- Plastic D-Rings for Accessory Attachment
- Rigid Padded Backpack and Carry Handle: Stability and Ease of Transport
- Buoyancy Control:
3-Exhaust/Overpressure Relief Valves
2-Vlaves with Pull Dump Handle (Right Shoulder/Lower Rear)
Cressi's Power Inflator with Cable Activated Pull Dump
3/8" Threaded Low Pressure Quick-Disconnect Hose - Torso Adjustable Shoulders
- Adjustable Sternum Strap
- Adjustable Waist Strap with Cummerbund Pad for Comfort
- Straps Equipped w/Squeeze-Style" Side-Release Buckles for Quick-&-Easy Donning & Doffing
- Lift Capacities: 29.2 lbs. to 45 lbs. (13.25 kg to 20.4 kg) Size Dependent
- Single Cam Cylinder Band
- Owner's Manual
- Leisure Pro Team T-Shirt, Red:
- Sport the Leisure Pro Team Shirt
- Show What You Were "Born to Do"
- Innovative Graphic Design
- Shirt Front: Hard Hat Helmet Logo w/Leisure Pro and Born to Dive Print
- Back Shirt: Leisure Pro Diver Emporium Logo
- Color: Red w/White Logos
- 100% Cotton Material
- Great Gift Idea