800.637.6880
212.645.1234
|
Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)
4.5
See More Similar
Scuba Hoods »
|
|
Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM) X-Large
|
List Price:
|
$79.99
|
|
Our Price:
|
$63.99
|
|
You Save:
|
$16.00 (20%)
|
SKU:
SSTC6H
In Stock
|
|
|
Questions about this item:
Billy B I dive with the Ocean Reef Neptune II but I dive with a wetsuit. I need a hood that seals with a full face mask, but I don't know if this will work due to the lack of a bib?
PETER S I am not familiar with the ocean reef as I dive with an interspiro full face, I use this hood with both dri suit and wet suit. It is the most comfortable hood I have ever owned. It is also first hood that seals perfect on the mask without air leaks. Hope this helps.....Pete
TRENT S I dive with a AGA Interspiro FFM. The hood does a great job of making a tight seal with the mask. The hood is designed to be used with a drysuit do to the lack off a bib. My guess is that you will get water movement around your neck and shoulders because you can't tuck it in. Depending on the temperature of the water you are diving in, that could be pretty unpleasant. As you probably know, hoods for FFM are few and far in between. Another option is trim the face opening of a bib hood to fit your FFM. Not a perfect option but it works.
ELIZABETH R I use a dry suit but this hood has worked very well for myself and a couple other members of my dive team.
Kris R A little sizing help plz I find Henderson hoods fit a little small so I require a xxl where as Bare run a little large and I only need an xl so what would you suggest in the Seasoft ??
Kris R Hmmm looking for something for a full face mask but doesnt seam to be much choice out there ? Im gussing theres no vent hole in the top which is an easy fic,
MARK A Kris,
I'm not sure I'd recommend the Seasoft Pro. Here's the problem. I bought it to use under an Auga mask, but the hood doesn't fit that snug against my face. So when the Auga mask seals to the hood, exhaled air goes between my face and the hood, filling the hood with air. After a few dives looking like Megamind, I finally ended up trimming the hood to fit up to but outside the Auga mask. I'd recommend either getting a different hood with a tighter seal against your skin, or get a Seasoft mast that fits really snug.
Having said that, I usually wear a XXL hood, which Seasoft didn't have. I ordered an XL.
Shopper What is the sizing for this?
LeisurePro S Approx. sizing: Medium = 22-23 inches, Large = 23-24 inches, XL = 24-25 inches, XXL = 25-26 inches.
Warranty Information
This product has a limited warranty of 24 months.
www.seasoftscuba.com (800) 939-5510
Whats in the box:Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM) When Diving, the Deeper a diver goes the Colder it generally gets and with Increasing Pressure, a Typical Neoprene Hood gets thinner. If the Temperature is getting Colder and your Hood is getting thinner, you're going to get Cold. And, when you consider that 35% of Heat Loss is from the Head area, it seems like this would be a place to make sure you are Adequately-Protected to ensure Warmth and Comfort. The SEASOFT Titanium PRO/C6 Hood has 4 different types of Nylon ll Neoprene including Compressed Neoprene for the Back-3 Panels of the Hood. This means that no matter how deep you go, they are still their Original-Thickness and working to keep you Warm! You will not find any Seams down the middle of the Chin either. This Seam, found in almost all Hoods today, can cause Jaw Fatigue. The Seam is there because it is less expensive to make a hood from just two halves. We do not believe that a hood is the place to go cheap. The Hood has Titanium Flakes Poil Technology that creates 2-Layers of Titanium Foil that Reflects Cold away and Reflects your Heat in keeping you Warmer than Hoods without this Technology. The 6 mm material is going to Naturally-Fit and Stretch around your head better. This leaves less room for cold water to occupy UNDER your hood, this helps to maintain warmth as well. There are also two very Small-Holes for Air-to-Escape from the Inside-Crown of the Hood in case air enters your hood with a Thin-Baffle Built-Over the Holes to prevent Water from Entering. The SEASOFT PRO / C6 6 mm Dry Suit Hood is a Commercial Dry Suit Hood designed to be worn with a Full Face Mask in Cold Water. The PRO/C6 has a Layer of Skin-In Neoprene on the Inside and on the Outside with a Layer of Tough Nylon in between these two layers. The Skin-In Neoprene allows the Hood to Seal to your Face and the Full Face Mask to Seal to the Hood. SeaSoft Pro/C6 Wetsuit Hood use 6 mm Neoprene with Glued and Sewn Seams for Strength and Durability. The Hood is available in sizes Medium, Large, X-Large and 2X-Large, is Black in Color and is covered by a 24 month limited warranty.
- Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM):
- Specifically Designed for Full Face Mask Divers in Cold Water
- 35% of Heat Loss is from the Head
- Construction: 4 Different Types of Nylon ll Neoprene
- Compressed Neoprene: Back 3-Panels of the Hood
- Compressed Neoprene: Won't Get Thinner at Depth
- Thicker Neoprene: Warmer Dive
- No Chin Seam: Reduced Jaw Fatigue
- Titanium Flakes Poil Technology: 2-Layers of Titanium Foil
- Titanium Foil: Reflects Cold Away and Reflects your Heat In
- 6 mm Naturally-Fit and Stretch Around Head Better
- Small-Holes with Thin-Baffle on Inside-Crown Vent Trapped Air
- Seams Glued and Sewn for Strength and Durability
- Layer of Skin-In Neoprene on Inside and Outside with Layer of Tough Nylon in Between
- Skin-In Neoprene allows Hood to Seal to Face and Full Face Mask to Seal to Hood
- Sizes: Medium, Large, X-Large and 2X-Large
- Color: Black
- 2 Year Limited Warranty
| Material | Nylon ll Neoprene | | Thickness | 6 mm | | Seams | Glued and Sewn | | Weight [with packaging] | Large: 0.4 lb, Medium: 0.6 lb, 2X-Large, X-Large: 0.65 lb |
4/24/2012 4.0Bring on the full face masks! By DiveMedic766 from Pound, VA - Sizing:
- Feels true to size
- Diving Type:
- Night Diving, Open Water Diving, Rescue Diving
- Was this a gift?:
- No
By lodiveco from New Hampshire - Good Fit
- Prevents Water Movement
- Warm
- Cold Water
- Professional
- Recreation
- Sizing:
- Feels true to size
- Diving Type:
- Night Diving, Open Water Diving, Wreck Diving
- Was this a gift?:
- No
|
|
|