Print Page
 
 
LeisurePro >
 

See More Similar Scuba Hoods »

Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)

List Price: $79.99
Our Price: $63.99
You Save: $16.00 (20%)

The Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)
                ships free

SKU: SSTC6H

In Stock
Bill me later
 
Quantity:  1


DESCRIPTION

Whats in the box:Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)

When Diving, the Deeper a diver goes the Colder it generally gets and with Increasing Pressure, a Typical Neoprene Hood gets thinner. If the Temperature is getting Colder and your Hood is getting thinner, you're going to get Cold. And, when you consider that 35% of Heat Loss is from the Head area, it seems like this would be a place to make sure you are Adequately-Protected to ensure Warmth and Comfort.

The SEASOFT Titanium PRO/C6 Hood has 4 different types of Nylon ll Neoprene including Compressed Neoprene for the Back-3 Panels of the Hood. This means that no matter how deep you go, they are still their Original-Thickness and working to keep you Warm! You will not find any Seams down the middle of the Chin either. This Seam, found in almost all Hoods today, can cause Jaw Fatigue. The Seam is there because it is less expensive to make a hood from just two halves. We do not believe that a hood is the place to go cheap.

The Hood has Titanium Flakes Poil Technology that creates 2-Layers of Titanium Foil that Reflects Cold away and Reflects your Heat in keeping you Warmer than Hoods without this Technology. The 6 mm material is going to Naturally-Fit and Stretch around your head better. This leaves less room for cold water to occupy UNDER your hood, this helps to maintain warmth as well. There are also two very Small-Holes for Air-to-Escape from the Inside-Crown of the Hood in case air enters your hood with a Thin-Baffle Built-Over the Holes to prevent Water from Entering.

The SEASOFT PRO / C6 6 mm Dry Suit Hood is a Commercial Dry Suit Hood designed to be worn with a Full Face Mask in Cold Water. The PRO/C6 has a Layer of Skin-In Neoprene on the Inside and on the Outside with a Layer of Tough Nylon in between these two layers. The Skin-In Neoprene allows the Hood to Seal to your Face and the Full Face Mask to Seal to the Hood. SeaSoft Pro/C6 Wetsuit Hood use 6 mm Neoprene with Glued and Sewn Seams for Strength and Durability. The Hood is available in sizes Medium, Large, X-Large and 2X-Large, is Black in Color and is covered by a 24 month limited warranty.

FEATURES
  • Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM):
  • Specifically Designed for Full Face Mask Divers in Cold Water
  • 35% of Heat Loss is from the Head
  • Construction: 4 Different Types of Nylon ll Neoprene
  • Compressed Neoprene: Back 3-Panels of the Hood
  • Compressed Neoprene: Won't Get Thinner at Depth
  • Thicker Neoprene: Warmer Dive
  • No Chin Seam: Reduced Jaw Fatigue
  • Titanium Flakes Poil Technology: 2-Layers of Titanium Foil
  • Titanium Foil: Reflects Cold Away and Reflects your Heat In
  • 6 mm Naturally-Fit and Stretch Around Head Better
  • Small-Holes with Thin-Baffle on Inside-Crown Vent Trapped Air
  • Seams Glued and Sewn for Strength and Durability
  • Layer of Skin-In Neoprene on Inside and Outside with Layer of Tough Nylon in Between
  • Skin-In Neoprene allows Hood to Seal to Face and Full Face Mask to Seal to Hood
  • Sizes: Medium, Large, X-Large and 2X-Large
  • Color: Black
  • 2 Year Limited Warranty

SPECIFICATION
MaterialNylon ll Neoprene
Thickness6 mm
SeamsGlued and Sewn
Weight [with packaging]Large: 0.4 lb, Medium: 0.6 lb, 2X-Large, X-Large: 0.65 lb

ITEM INCLUDES
Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)

PRODUCT REVIEW

REVIEW SNAPSHOT®

by PowerReviews
Seasoft Pro/C6 6MM Drysuit Hood For Full Face Mask
 
4.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

 
4.0

Bring on the full face masks!

By DiveMedic766

from Pound, VA

About Me Advanced

Pros

  • Durable
  • Good Fit
  • Warm

Cons

    Best Uses

    • Cold Water
    • Professional

    Comments about Seasoft Pro/C6 6MM Drysuit Hood For Full Face Mask:

    Purchased hoods to be used on regional dive rescue operations in order to be able to utilize full face masks with diver-diver and diver-surface communications. True to fit. Comfortable, and will be put to good use. Bring on the full face masks!

    • Sizing:
    • Feels true to size
    • Diving Type:
    • Night Diving, Open Water Diving, Rescue Diving
    • Was this a gift?:
    • No

    Comment on this review

     
    5.0

    Good dry suit hood

    By lodiveco

    from New Hampshire

    About Me Professional

    Verified Buyer

    Pros

    • Good Fit
    • Prevents Water Movement
    • Warm

    Cons

      Best Uses

      • Cold Water
      • Professional
      • Recreation

      Comments about Seasoft Pro/C6 6MM Drysuit Hood For Full Face Mask:

      Very nice hood for use with a full face mask.

      • Sizing:
      • Feels true to size
      • Diving Type:
      • Night Diving, Open Water Diving, Wreck Diving
      • Was this a gift?:
      • No

      Comment on this review

      Displaying reviews 1-2

      Back to top