How do I remove the bulb? It twists but doesn't loosen.
DAVID B Hello,
You have to remove the black contact plate from the reflector. Notice that the reflector is spring loaded and can be pushed in and out from the base plate. Look for the open slots with the holding pins on the side of the base plate. Use a small flat head screw driver just to the side of the narrow top of one of the slots to gently pry up the housing of the base plate to allow the holding pin to clear and slide out. Place the screwdriver just to one side or the other of the pin slot to avoid breaking the narrow band of plastic at the top of the slot. Repeat if necessary on other slot to release second holding pin. Now the spring with bulb just slides out. Replace the bulb, insert in spring and re-assemble. Good luck. Dave