KAREN B good replacement for a broken PI

LAURA W It should. The only brand I am aware of that has differently sized quick releases for power inflators is Scubapro. The rest should all be the same. Now mind you, I don't dive a Cressi, so I couldn't tell you with 100% certainty. Good luck!

DMITRY F Hi there! Your original Cressi power inflator is most likely has salt inside. That happens with most of them due to the fact that we don't pay a lot of attention to rinsing the gear. All moving parts of your gear should stay in fresh water a bit longer before you pack to go home. Give the salt from the sea some extra time to dissolve. Otherwise the salt dries, and the salt crystals would affect o-rings or inner surfaces. The knob of your inflater is most likely blocked by crystals of salt. Eventually it happens with all inflators, the difference is will it happen in 2-3 years or in 10-12? Most likely OMS inflator will fit your Cressi BCD because this is a standard interchangable device. Make sure it stays really tight when you assemble it. Have fun!

MICHAEL S Jeanette, the openings on BC inflator hoses are pretty much standard. I have used these on a number of BCs and am quite happy with there performance. you should know right away if they fit when they arrive. Leisurepro is pretty good about accepting returns if there is an issue. Mike

MICHAEL F I'm fairly sure it will work with most BCDs. It connects with a zip tie. That being said, your current LP inflator hose might not connect to it. Some brands use non standard inflator hoses, and I think Seaquest is one of them

WILLIAM R I belive most of the hoses for the BCD's are a standard diameter. I base this on my sister-in-law has the OMS Angled Power inflator, mounted on a Scuba pro BCD and it has the same size hose as my Sherwood, and my sons Oceanic BCD.

RENEE L Sorry cannot answer your question since I only used on my OMS BC.

ROBERT K A. I don't know. B. I bet so, because as far as I know, BC inflator tubes all all the same diameter at this connection point. C. I am happy to be corrected if someone knows better.

ANDREW B Jeanette, This fit a c. 1992 SeaQuest ADV stab jacket of mine, and also a newer Dive Rite one. Not sure about the Cressi. Measure the hose - if it's the same internal diameter, it should work, whether or not it has the internal dump valve wire. Make sure the hose isn't degraded; if it is replace that also...I did on mine. Works well on both my BCD's. Good luck, Andrew

KAREN B No Idea... I would call LP's showroom. They would know

LeisurePro S Yes