Whats in the box:Low Pressure 8 cu ft Cylinder, PRO DIN/Yoke Combo Valve, Highland Pony Mount, Highland Compact First Stage, Mini Tech Gauge, DIN Cap, Over Pressure Relief Valve, 22" EZ Quick-Disconnect Hose, Argon Sticker
Keeping warm when diving can be one of the most difficult things to do. If you wear a dry suit you can remain warmer for longer periods of time then if you wear a wet suit, but even a dry suit can allow you to have heat loss. One way to increase the retention of body heat in a dry suit is to use argon gas to fill it rather than air or nitrox.Argon is a great insulator, being heavier then air or nitrox argon will keep you warmer longer.
XS Scuba's Highland Dry Suit Inflation Kit can increase your bottom time by keeping your breathing gas for just that, breathing and it also can increase your bottom time by keeping you warmer. Kit comes complete and ready for use. Kit is easy to install and includes an 8.4 cu ft low pressure (2015 psi) aluminum Catalina cylinder which is CGA color coded for argon gas only with warning stickers. XS Scuba's DIN/Yoke Pro Valve completes the cylinder assembly.To attach your argon system to your primary cylinder system Highlands Pony Mount which is made of(Grade 316) stainless steel and attaches directly to your standard 2" cylinder band and will fit from 6.9" to 8.0" diameter cylinders without the use of hose clamps.
Attached to the cylinder valve is a factory set 120 psi IP compact simple flow-by piston designed first-stage regulator equipped with a over-pressure relief valve mounted in a LP port for added safety. A mini tech gauge is also attached to the first-stage with a 0-5000 psi range of reading. To complete the assembly youalso get a 22" EZQD hose and Delrin DIN cap to protect the first-stage when not attached to the cylinder.
So stay warmer and get better bottom time with Highlands by XS Scuba Argon Dry Suit Inflation System
Highland Complete Argon System Pony Mount HL409 316 Grade Stainless Steel Attached to Your 2" BC Strap Fits 6.9 to 8.0" Diameter Cylinders No Hose Clamps
Argon Sticker ST240 Bold "Do Not Breathe"
17.5" x 3.5"
Argon Cylinder AL08RG 2015 psi Low Fill Pressure
8.4 cubic feet
4.4" Diameter & 10.9" Height
3.8 lbs.
Buoyancy Full -1.7 lbs.
Buoyancy 500 psi -1.0 lbs.
Painted Bright Orange
CGA Color code for Argon Gas
Manufactured by Catalina
PRO Valve VX200-20N INTL DIN/Yoke Combo Valve
Removable DIN Insert
OPV Valve AC395 Prevent Over-Pressurization
Mounted to 3/8" LP Port
200 psi Relief
Stainless Steel Spring
Mini Tech Gauge HL501 0-5000 psi
1" Diameter Face
220 Degree Sweep
Chromed Brass Case
DIN Cap HL401 Machined Delrin Construction
Seal the 1st Stage from Moisture
Protect Threads on 1st Stage
Attached Nylon Cord Lanyard
Argon First Stage HL405 DIN 300 bar Inlet
Factory set at 120 psi IP
Compact Low-Profile Size
Simple Flow-By Piston Design br>
Attachment H ose EZQD-22 22" Long Low Pressure Hose
EZQD Attachment - "Just Push"
Wide, Easy Grip Collar
Flattened Side to Prevent Interference by X Scuba