R K M I have the 2lb and the 10lb. The 2's are 2.75 in. wide and 3.25 in. tall. the 10's are 3.75 in. tall and 6.25 in. wide.

GERARD L Duuuu-de,,they are your normal "lead" weights!!!.. But they are well made,,as the past weights were made very coarse & not true ,,these are "Dakine" !!!!

HAWKEYE P I only have the 2lb. It is 2 3/4" Wide x 3 1/4" High x 1" Deep.

RODNEY B The size depends on the weight. The slots fit a standard weight belt

RENE D 2 pounds are 3 inches long and 2 inches wide. 5 pounds are 4 inches wide and 5 inches long. They are very comfortable weights. 12 pound weights are 7 inches long and 4 inches wide. Rene, Laredo,Tx

LeisurePro S A very rough guide is to start with a base of 10 percent of your body weight and then add 2-10 additional pounds depending on what kind of suit thickness you are wearing, what kind of water you are diving in (salinity) and what other accessories you might be carrying.

LeisurePro S I would imagine you are going to need any where from 5-8 more pounds of weight. If you have the suit already, you can estimate 3 pounds of every one pound of suit. Or you can start from the beginning and, using the rough rule of thumb, take 10% of your body weight and add around 6/7 pounds for the 7mm suit. As far as what size weights to get, you just want to keep balancing in mind, so you can have the same amount of weights on both sides of your hips. Smaller sized weights, if you have the pocket space, also lend themselves to greater flexibility.

LeisurePro S 2" max

LeisurePro S I would recommend the coated lead weights, they cost a bit more but you don't have to worry about lead exposure because the weights are coated with a protective coating. Here is the link Aqua Black Vinyl Coated Lead Weights