Shopper how many do i need to buy one for each tank or.....??
JOHN M Just one. You would remove the yoke and the yoke nut and the Din Donversion kit will screw onto the 1st stage. Do no locktight it like they recommend. You will never get it off again if so. I've done many tech dives with these regs and they work great. Dive Safe.
JEREMY S You only need to buy one to attach to your 1st stage on your regulator. It's fairly simple to do yourself but if you haven't done it take it to your local dive shop and have them do it the first time.
ROBERT D The DIN fitting replaces the yoke assembly on the regulator 1st stage so only one kit is required.
TIMOTHY W You can buy one for each tank or you can use it to share with other tanks.
ARLENE S The Sherwood 300 Bar Din Conversion Kit is used to attach a Sherwood INT regulator to a DIN tank. So you need one conversion kit per tank. I hope this answers your question.
KENNETH W NO. This is to change the regulator first stage to DIN. It has nothing to do with the tank.
JAMES D Only need coversion Kit for your First stage
JEFF W This is not a serious question is it?
JONATHAN S Just one...it screws onto your first stage and once you torque it down it becomes soley din...I say this since it's a pain to keep switching...what I did to make it quick was I also purchased a yoke adapter so when I had to use a yoke it only took a few seconds to screw on over the din
GARY T This replaces the yoke on your current regulator, so you only need to buy one.
Once installed, you can only attach it to DIN tanks, unless you purchase a screw-on yoke adapter, which gives you the ability to switch easily between attaching your regulator to either the DIN or yoke style tank valves.
I use this system, and I like the flexibility it gives.
CANDALENA M No. The conversion goes on your first stage. It's not a quick change so you will want to use only those tanks for that regulator.