Comments about Aqua 4.5 LBS Block Style Weight Mold:

Worked very well with a Mold Release agent (Silicone Spray) Be very careful of the fumes, take proper precautions....

Comments about Aqua 4.5 LBS Block Style Weight Mold:

The mold is perfect. Preheat the mold while melting the lead (use caution and ventilation of course). We sprayed a little cooking-oil-spray into the mold and began pouring. Once we began pouring we were able to go through 100 pounds of lead truck weights in 4 hours. The mold has reference lines for different size weights. We poured 1.5, 3, and 4.5 pound weights. It all went very fast.

After the "sheen" came comes off the lead (it solidified) we simply turned the mold over and the weight dropped-out If the weight wasn't perfect we remelted it. If the weight was stuck in the mold we remelted the lead in the mold and poured it back into the melt pan. This mold could make thousands of weights easily once you get into it...

Of course care and safety must be taken as everything is very hot. Welding gloves and fresh-air ventilation are a must.

Comments about Aqua 4.5 LBS Block Style Weight Mold:

Used one of these originally but it developed a crack through the handle and bottom of the mould. Had to discard it.

Comments about Aqua 4.5 LBS Block Style Weight Mold:

Have made several weights so far with most coming out about 3 lbs. Good mold design.

Comments about Aqua 4.5 LBS Block Style Weight Mold:

Try to keep the mold hot it will make the weights look better