800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
Dive Alert Plus
|
List Price:
|
$80.00 - $90.00
|
|
Our Price:
|
$67.95
-
$76.50
|
|
You Save:
|
$22.05 (25%)
|
SKU:
AQUDP
In Stock
|
|
|
Questions about this item:
Shopper I'm trying to decide what to get. Why did you pick this one?
GARRY K I previously had a dive alert (above water only) for many years. I got sand in the values and needed a new one. I decided to try the underwater signaling device as well as the above water signaling. However, I have found that I generally use a tank banger instead for underwater signaling.
NICK W Spent a dive testing this just to see how good it works. Started with a surface test and it is very loud. Boat will not have any trouble hearing you from a distance. In the underwater mode it works best in burst as it seems to use a lot of air if used holding the button. It?s a bit larger than a single horn but does not get in the way. My whole family has one and gives me a peace of mind. Remember this is no substitute for a whistle as it does not work if you tank is empty.
GUILLERMO R I liked it because it works underwater and above water. Almost never use it underwater. In retrospect I could have the AIR only and be as happy as I'm now. The AIR only is a bit smaller, I like both. Horse a piece.
JOHN D It's the only one that works both above & below the surface via a simple dial.
THOMAS F I chose this model because it fit the majority of BC's that I use. This version also had the ability to signal above and below the water. I have used it on two dives in Belize and it works well. I would recommend going over its operation pre-dive with yourself and your buddy.
Tom Francisco
Dive Master
anas m I have Zeagle Ranger BCD which model of dive alert plus is fit for my BCD?
DON H Dive alert has to match inflator hose connection. I have a Tusa air 2 instead of octo. My dive alert matches Tusa air 2. Ranger bcd have different inflator hoses fittings according to when they were manufactured.
CHARLES J We purchased the DP1 for use on our Zeagle Rangers and have had no problem. Please be careful with the air horn above the wateras it is very loud.
ROBERT C I added a Zeagle Octo-Z Alternate Air Source so I use a DP3X Dive Alert Plus. If you use the conventional inflator I beleive you'll need to use the DP2X.
Shopper Hi there, Actually I had my sequest latitude which bought from you before. I'm not sure the inflator attached is factory standard or not. Just want double check which model DA plus can fit? Thanks
David R If you do not have a built in Octopus on the power inflator , then it's the #1 model otherwise the #2 model.
RICHARD S Can't comment about which models the da fits or even if your inflator is a standard fitting. However I have had mine on both a cressi and oceanic probe bc and it has worked flawlessly.
AALLEN I what will fit the tusa BCJ 7000 BCD? TY
JOHN D It depends on what kind of power inflator you have on your BC.
If it's a standard size power inflator, then order the standard size.
If it's an Air II (Scubapro) or an Atomic, then order the larger size.
Odd Leisure Pro couldn't answer this.
PATRICK M The Dive alert plus will fit any BC with a low pressure inflation hose. But it does add approximately 4 inches of excess hose. I use these on all my dives. Keep in mind that 4" can be caught when diving tight areas such as swim-throughs and wreck diving.
JASON S SOrry I have a Mares Bcd so I wouldn't know.
FRANK Y The standatd dive alert plus shoud fit any BDC low pressure inflator except:
One fitted with a ScubaPro alternate airsource or some Halcyon and Apex low pressure inflators (which seem to have just a fraction of a millimeter too much chrome plating for a fit).
I believe there is anothe model of the Dive Alert Plus that fits the ScubaPro connecvtion.
Having said all of that, in my personal experience, the underwater part of this signaling device performs anemically when new and soon fails alltogether.
MICHAEL R This should fit if you want to use it on your lower pressure inflator hose.
Shopper I HAVE THE O M S BACK INFLATE WHICH MODEL WILL FIT THIS B C D. ?
RAY S I believe the D.A. 1 will fit your BCD. The D.A. 2&3 both give specific brands for which they are fitted. As an instructor, I have ordered many things from Leisure Pro. It has been my experience that in case the D.A.1 doesn't fit the OMS connecter, Leisure Pro will exchange it as long as you don't use it and return it in the original packaging. Hope this is helpful and not too late getting to you. Excellent product though 2 thumbs up :)
JAMES B The real quesiton is what type of LP inflator is on your BCD (if you have a after market combination Octopus/LP Inflator); I have a Sherwood Avid with SHerwood's standard inflator, which teh Divealert #1 fit; unfortuantley I do not know you what fits the OMS, probably best off checking with Dive Alert.
MICHAEL K Hi,
Because there are 3 models you will probably have to go to product website to check or find the chart for proper models.
M
JOHN D Unless the power inflator on this person's OMS is an Air II, naturally the standard Dive Alert Plus would fit it. You guys should know this.
John
Shopper Which model will fit on Oceanic Hera BCD and on Oceanic Probe LX, both without Air XS alternate inflation regulator systems?
DANNY C I'm do not know about those BCD's. Sorry
RICHARD A This is a great product which works well underwater, too! I use it often as an Open Water Scuba Instructor as well as with friends. Make sure you get the one that fits your own inflator hose's disconnect!
Shopper Will this fit Hollis ats?
LeisurePro S Yes, you will need the DA Plus 1.
Shopper Which model will fit on a Zeagle?
LeisurePro S It depends on if you have a secondary air system attached to your BCD. If you have the regular inflator hose, you should need model #1. If you have the OctoZ, you'll need model #3.
Shopper Which model fits the Hollis ATS?
LeisurePro S Sorry, unfortuantely the Dive Alert Plus does not fit the Hollis systems.
Shopper Which dive alert plus will fit the Aqualung Airsource 3?
LeisurePro S So sorry, unfortuantely none of the Dive Alert models fit the Airsource 3.
Shopper Which model would I need for the Mares Dragon Airtrim w/MRS Plus Weight Pockets BCD?
LeisurePro S You will need the DA1.
Shopper Which one will fit my Tusa Conquest BC?
LeisurePro S You will need the DA1.
Shopper Whick model will fit on a Zeagle Octo Z?
Shopper Which one will fit a Mares Icon BC?
LeisurePro S You will need the DA1.
Shopper Will it fit my Aeris Atmos XT? Which one?
LeisurePro S You should need the DA2.
Shopper Which model will work with my Sea Quest Lattitude BCD?
LeisurePro S You will need the DA Plus 2 if you have a octo combo inflator on it or a DA Plus 1 if you just have the standard inflator that the BCD came with.
Shopper Which one can be used with a ScubaPro Air 2?
LeisurePro S You will need DA Plus 3.
Shopper Which model will fit a Sherwood Gemini octo/inlator?
LeisurePro S Model three will work with Sherwood.
Shopper Which model would I need for a Dive Rite Transpac II?
LeisurePro S The Dive Alert Plus DA1 should fit your dive rite BCD.
Shopper will it fit in zeagle scout?
LeisurePro S Yes, you will need the DA Plus 1 model.
Shopper Wich one will fit on a oceanic islander bc?
LeisurePro S Yes it will, you will choose type 1.
Shopper Which one will fit on a seaquest black diamond.
LeisurePro S the DA Plus 1
Shopper which one will fit the Zeagle Ranger BCD?
LeisurePro S The DA Plus 1 model
Shopper I have two B.C.D's #1 is a Sea Quest Malibu with an AIR SOURCE octo/ inflator combo. # 2 is a Sea Quest Diva LX with a standard power inflator. Can you please tell me which model I need for each BCD?
LeisurePro S You will need the DA Plus 2 for the malibu that has the air source on it. for the diva will need the DA Plus 1
Shopper I have Oceanic Excursion BC ,Wich one will fit on this one?
Shopper My next BC is going to be the Mares Vector Origin SP? Which model fits that BC?
Shopper WHich one fits the Scuba Pro Classic Plus?
LeisurePro S The DA Plus 1 size will fit the standard Classic Plus BC unless you have an AIR 2 installed on it (octo / power inflator combo).
Shopper Wich one will fit on a Cressi BC?
LeisurePro S The DA Plus 1 model will fit on a Cressi BC
DiveAlertPlus is a specially designed, small, light weight air horn that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator, breathable/inflator and buoyancy compensator. Installation is easy and only takes a moment. DiveAlert Plus does not require any modification of your other equipment, and it does not interfere with the normal operation of your other equipment. DiveAlert Plus enables divers to signal both above and below the water's surface.
There are three different models available; one for approximately 85% of standard power inflator mechanisms model DP1. There are several breathable/inflator mechanisms that require a larger coupling for a higher flow of air so there are two models to accommodate them. The model DP2X and the modelDP3X (see list below).
Why have DiveAlert Plus? What would you do in a diving emergency if you needed to get the attention of the pick-up boat or someone else on the water's surface?Before DiveAlert Plus SCUBA divers had relied on whistles or a SMB (surface marker buoy) as their only signaling devices in such an emergency. But if the diver is disabled and can't blow into a whistle (or deploy the SMB) the whistle makes no sound at all. Or if the boat operator is not looking in the direction of a diver with a SMB deployed (if the diver was able to even deploy the SMB) the diver goes un-noticed.
Or, what would you do if you wanted the attention of your dive buddy, for whatever reason, and he was simply distracted and not paying attention to you at that very moment? Traditionally, you would be forced to swim up to him or her until you got their attention. In contrast, DiveAlert PLUS enables divers at the mere touch of a button to generate a loud blast of sound on the surface that can be heard up to a mile away! Or, by switching the DiveAlert PLUS diverter valve for subsurface signaling the diver can now signal for his dive buddy's attention underwater!
When you need to get someone's attention on the water's surface, you simply select "AIR" operation with your diverter valve, press the button and DiveAlert PLUS uses a small amount of air from your SCUBA tank to make a piercingly loud sound. Or, when you want to get someone's attention under the water's surface, you simply select "H2O" operation with your diverter valve, press the button andDiveAlert PLUS uses a small amount of air from your SCUBA tank to make a percussion noise to alert your dive buddy.
DP1 DiveAlertPlus - Standard model compatible with 85% of all power inflators.
DP2X DiveAlertPlus compatible with SeaQuest's AirSource, APEKS System's Zeagle Octoplus, Beuchat Venturi, Oceanic's Air XS alternate inflation regulator systems, and Mares AirControl .
DP3X DiveAlertPlus compatible with ScubaPro A.I.R. 2, Zeagle OctoZ, Sherwood Gemini, Tusa Duo-Air and Atomic SS1 alternate inflation regulator systems.
- Models Available for Almost All Inflators and Breathable/Inflators
- Extremely Load (132db)
- Signal with a Touch of a Button
- Dual Signal Above and Below the Surface
- Works with as little as 100psi
- Lightweight Design
- Increased Dive Safety
- Up to One Mile Audible Range
- Easy to Install
By Juan from Miami Beach, FL - Easy To Use
- Functional
- Solid Construction
- Easy To Use
- Solid Construction
5/8/2011 4.0Good device and easy use - Easy To Use
- Functional
- Solid Construction
4/12/2011 (1 of 1 customers found this review helpful) By Uzbeckin from Honolulu, HI - Easy To Use
- Functional
- Improves Diving Experience
3/28/2011 (1 of 1 customers found this review helpful) By Scuba Sniper from Corpus Christi, TX - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Solid Construction
- All Diving Applications
- Recreation
- Warm Water
|
|
|