Print This Page
Brand:
Seasoft
Located in:
Exposure Protection, Hoods
When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensurewarmth and comfort.
All of SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go, they are still their original thickness and working to keep you warm!
You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, can cause jaw fatigue. The seam is there because it is less expensive to make a hood from just two halves. We do not believe that a hood is the place to go cheap.
All of SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go, they are still their original thickness and working to keep you warm!
You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, can cause jaw fatigue. The seam is there because it is less expensive to make a hood from just two halves. We do not believe that a hood is the place to go cheap.
[1 of 1 customers found this review helpful]
SeaSoft Titanium Pro Dry Hood with Zippe
By Sandy
from Oakland, CA on 10/10/2007
from Oakland, CA on 10/10/2007
Sizing:
Feels true to size
Pros:
Durable, Good Fit, Prevents Water Movement, Warm
Cons:
Couldn't lift head back, Zipper too stiff
Best Uses:
Cold Water, Recreation
Describe Yourself:
Advanced Diver
Bottom Line:
No, I would not recommend this to a friend
Comments about Seasoft SeaSoft Titanium Pro Dry Hood with Zipper:
This hood fit well but the zipper was too stiff and restricted movement of my head up or backwards.