Buy the OmerSub Bat 25 Ocean Mimetic Full Foot Freediving Fins on http://www.leisurepro.com
Print This Page
Print This Page
Brand:
Omersub
Located in:
Essential Equipment, Fins
These completely new blades have been introduced by Omersub at the beginning of the year 2003, after a long research, to replace the carbon fiber blades, which had been until that time, the sole credible alternative for performing freediving fin blades. These blades are produced from sheets of composite fibers, usually utilized for highly technical and performing electrical and aeronautical applications, which are then machined on high speed Rambaudi CNC machines. Depending on the thickness of the original sheets, which is either 1.6mm or 2.0mm, and the thickness of material scalped, we have obtained three different types of blades: BAT25, BAT30 and BAT40.
The BAT25 is the softer version, the BAT30 has a medium stiffness and the BAT40 is the one with highest stiffness and performing action. The result is an incredible blade, as performing as a carbon fiber blade but with a much higher resistance to both impact and bending. The non return plastic point is virtually unreachable for this application. Every blade is machined with extremely small tolerances, resulting in a complete consistency of production. The blade is scalped, at different thickness depending on the model, only in channels in the inside parts of the blade, leaving a thick crown on the perimeter which greatly increases impact resistance, without compromising the bending efficiency and blade return. The blade is reinforced on the side with an additional extruded rubber profile which also channels the water during the strokes avoiding skidding. The blades are all sublimated with abrasion resistant camouflage color paint.
The BAT25 is the softer version, the BAT30 has a medium stiffness and the BAT40 is the one with highest stiffness and performing action. The result is an incredible blade, as performing as a carbon fiber blade but with a much higher resistance to both impact and bending. The non return plastic point is virtually unreachable for this application. Every blade is machined with extremely small tolerances, resulting in a complete consistency of production. The blade is scalped, at different thickness depending on the model, only in channels in the inside parts of the blade, leaving a thick crown on the perimeter which greatly increases impact resistance, without compromising the bending efficiency and blade return. The blade is reinforced on the side with an additional extruded rubber profile which also channels the water during the strokes avoiding skidding. The blades are all sublimated with abrasion resistant camouflage color paint.
Fish cant see me
By PJ
from Tequesta, FL on 12/30/2007
from Tequesta, FL on 12/30/2007
Sizing:
Feels true to size
Width:
Feels true to width
Pros:
Comfortable, Sneek up on fish easily
Cons:
Makes a little noise
Best Uses:
Recreation, SCUBA, Snorkeling, Spearfishing
Describe Yourself:
Advanced Diver
Bottom Line:
Yes, I would recommend this to a friend
Comments about Omersub OmerSub Bat 25 Ocean Mimetic Full Foot Freediving Fins:
Great with the ocean mimetic wet suit