Scubapro Product Reviews and Ratings - org.apache.xml.dtm.ref.DTMNodeIterator@15a7f06 - ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25 from Leisure Pro

Buy the ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25 on http://www.leisurepro.com

Print This Page

ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25 image

(based on 11 ratings)

Read All Reviews

Brand: Scubapro

Located in: Assorted Accessories, General Accessories

Use the "300 bar" DIN to convert your first stage from a yoke valve to a DIN valve. This is a necessary piece of equipment for any divers who want to switch between many aluminum and steel tanks. Also, scuba divers who travel overseas will want to have a DIN adapter in order to adapt to the tanks available at the local dive sites. The adapter allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear!

More information for the ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25

Review Snapshot®

Avg. Customer Rating:

4.5 stars

(based on 11 reviews)

100% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:

Easy to use(7), Functional(8), Improves diving experience(5), Lightweight(5), Solid construction(4)

Best Uses:

All diving applications(3), Cold water(4), Extreme depths(3), Professional(4), Recreation(3)

Describe Yourself:

Advanced diver(3), Professional diver(4)

easy to use with another adabtor

By fulklur

from Kuwait on 11/12/2009

Pros:

Easy To Use, Functional, Improves Diving Experience, Lightweight, Solid Construction

Best Uses:

All Diving Applications, Cold Water, Recreation, Warm Water

Describe Yourself:

Advanced Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

i changed my yok reg with this adabtor, it was effective and never leeking.
i use it with another yok adabtor and it was very easy to use.

Worked perfectly

By Seahound1

from Morgan Hill, Ca on 11/12/2009

Pros:

Functional

Best Uses:

Cold Water

Describe Yourself:

Advanced Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

Converted a yoke SB reg to a DIN.

[1 of 1 customers found this review helpful]

I would buy this again

By Ron

from Georgia on 10/13/2009

Pros:

Easy To Use, Functional, Improves Diving Experience, Lightweight, Solid Construction

Best Uses:

All Diving Applications

Describe Yourself:

Recreational Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

I have a ScubaPro MK 11 and this worked on it just fine, no problems.

Used on my MK25 first stages

By Mike from Cromwell

from Cromwell CT on 8/19/2009

Pros:

Easy To Use, Functional, Improves Diving Experience, Lightweight, Solid Construction

Best Uses:

All Diving Applications

Describe Yourself:

Professional Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

Bought as a spare. Never needed a spare but put it in my repair and save a dive kit

Only common source for this

By Walter

from Mid-West on 7/5/2009

Pros:

Solid Construction

Best Uses:

Professional

Describe Yourself:

Advanced Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

LP is one of good source to get SP DIN kit

Service & Delivery comments:

There were some cosmetic defect on the handle, but it has been replaced through LP customer service without any hassle. Good service!

Works well on MK 25 1st stage

By Mike from Cromwell

from Cromwell CT on 2/16/2009

Pros:

Easy To Use, Functional, Lightweight

Best Uses:

Cold Water, Extreme Depths, Professional, Recreation, Warm Water

Describe Yourself:

Professional Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

Works well haven't had a problem. I have put it on two Mark 25 first stages it has worked well. The first one I put it on about three years ago the threads were a bit tight, not a cross thread but tighter than I would have liked. The latest one it went on really easy.

[0 of 1 customers found this review helpful]

SCUBAPRO, YOU KNOW YOU WANT THE BEST!

By SHARK

from FT. LIQUORDALE FLORIDA on 2/4/2009

Pros:

Easy To Use, Functional, Improves Diving Experience

Best Uses:

Extreme Depths, Professional, Recreation, Warm Water

Describe Yourself:

Professional Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

QUALITY PRODUCT

[0 of 1 customers found this review helpful]

Didn't Work w/MK25 1st Stage

By skdivers

from Severn, MD on 9/3/2008

Cons:

Provides No Function

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

I bought a MK25 S600 from Leisurepro. This is the 2nd one I bought. In both cases it caused my 1st stage to leak. I went to a ScubaPro dealer and they stated I had done everything correctly. Plan on returning 1 to LeisurePro.

Must-have upgrade for technical divers

By David

from South Florida on 4/16/2008

Pros:

Easy To Use, Functional, Improves Diving Experience, Lightweight, Stylish

Best Uses:

Cold Water, Extreme Depths, Professional

Describe Yourself:

Technical Diver

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

This is a must-have upgrade for technical (and other) divers. ScubaPro regulators are already among the best - make it even better by upgrading to DIN.

[2 of 2 customers found this review helpful]

Works for Mk17 as well

By b1gcountry

from The Middle on 1/21/2008

Pros:

Easy installation, Easy To Use, Functional

Describe Yourself:

Divemaster

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

Works like it should. Installed on Mk17 first stages

Perfect place to get this product

By Silt Lover

from Tampa, FL on 9/25/2007

Describe Yourself:

Full Cave Technical

Bottom Line:

Yes, I would recommend this to a friend

Comments about Scubapro ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25:

Excellent price for this product

Customer Reviews about the ScubaPro "300 bar" Din Conversion Kit for MK16, MK18, MK20 & MK25 at Leisure Pro