Print This Page
Brand:
OMS
Located in:
Assorted Accessories, General Accessories
Will fit Aluminum & Low Pressure 3/4" Valve Thread Steel Tanks.
Yoke Adaptor not included in the 300 bar Manifold.
Manifold Specifications
Valve Thread USA 3/4" - 14 NPSM
First Stage Accommodation - - 200 bar DIN & Yoke, 300 bar DIN only
Burst Disk Service Pressure - 3500 psi
Burst Disk Rupture Pressure - 5800 psi
Oxygen Compatible Materials - YES
Max Valve Press Rating - (DIN Style Only) 4500 psi
Manifold Centerline Dist - 215mm
Cylinder OD size - 6.9" to 8"
Yoke Adaptor not included in the 300 bar Manifold.
Manifold Specifications
Valve Thread USA 3/4" - 14 NPSM
First Stage Accommodation - - 200 bar DIN & Yoke, 300 bar DIN only
Burst Disk Service Pressure - 3500 psi
Burst Disk Rupture Pressure - 5800 psi
Oxygen Compatible Materials - YES
Max Valve Press Rating - (DIN Style Only) 4500 psi
Manifold Centerline Dist - 215mm
Cylinder OD size - 6.9" to 8"
[7 of 7 customers found this review helpful]
OMS Crossbar 300bar
By Gored
from Seattle, WA on 10/23/2007
from Seattle, WA on 10/23/2007
Pros:
Improves Diving Experience
Best Uses:
Extreme Depths, Professional
Describe Yourself:
Tech Diver
Bottom Line:
Yes, I would recommend this to a friend
Comments about OMS OMS Isolation Manifold for 3/4" Valve Thread:
A great manifold! Make sure if you get this manifold you get the matching OMS tank bands. Also, be aware that there were a group of OMS manifolds that were recalled. Go to [...] for more details. In my experience this manifold has stood up to extreme cold water under 30 degrees F and pretty deep depths over 250'.