Print This Page
ScubaPro Twin Jet model comes with the mating ScubaPro male side of the buckle (ScubaPro female side is attached to the fin).
Below is a list of the actual fin strap sizes:
(the measurements are for the spring itself with out the buckle)
ScubaPro Twin Jet
- SM 6"
- MD 7"
- LR 8"
- XL 9"
Customers most agreed on the following attributes:
from Bavaro, Dom. Republic on 11/29/2008
Thing does it's job. Very easy to put on and take off. The only thing I don't like is that it hurts my foot a little in the back where the rubber part ends.
But after a couple of days no more problems even with that.
Much better than original rubber straps if you put on and take off your fins a lot :)
from Chicago on 9/24/2008
Ok they are spring fin straps, its not something that I am orgasmic about. But, they are very easy to use, functional of course, more durable than the typical rubber fin strap, and also more comfortable. Ok people- the spring straps make it a lot easier to put on or remove fins. The only issue I have with them is the pull loop seems like it should be reinforced, Though I (perhaps talented) can put on and remove fins with out using the loop.
from Auburn, WA on 9/3/2008
I'm happy now that I went with the XL size. The large size was far too small. So, an XL springstrap with a Large fin, and it worked out perfect for me. Leisurepro was helpful with the exchange. They're perfect. Should have done this years ago.
from San Diego/ SoCal on 8/25/2008
No hassle straps. Can be stretched (a little) if needed. Just be careful...you don't want them "too loose".
from Pittsburgh, Pa. on 8/24/2008
These straps make getting into and out of your fins so easy. No adjustments, nothing to break or come loose. Just slip you finger in the loop pull on and your ready to go. Really helps when boat diving especially in rough water.
from Rochester N.Y. on 8/7/2008
Works great. Easy to use.
from Torrance, CA on 7/26/2008
These Scubapro spring straps do not fit my Scubapro Twin Jet fins that I purchased in 2000. Sent e-mail to Scubapro asking for help. No response as yet.
from Chicago, IL on 6/26/2008
Grab that finger loop, pull back and SNAP! Your fins are on! I was the envy of everyone on the boat!
from Seattle area on 6/14/2008
Clips do not match - While they did not immediately fit my Twin Jet MAX fins (clips did not snap in as a replacement for the strap assemblies), it was a simple matter to remove the straps and roll-posts from their clips, and swap the spring mount to the orig Twin Jet Max strap clips. Two screwdrivers and 30 minutes is all it took. I'm very happy with the quality and performance - a significant upgrade from the straps!
Great job by your customer service rep "Sam" who helped me select the correct size.
from Saipan, CNMI on 6/8/2008
I just ordered these spring straps for mine and my wife's Twin Jet fins. We both really liked them for easy of use. However, after only having them for 2 weeks, the comfort grip puller on one of my straps broke as I was putting the fins on this past weekend. I'm waiting to hear back from Leisurepro now about the Limited Lifetime Warranty. Hopefully I'll have good results to report back.
from SCOTLAND UK on 6/3/2008
EXCELLENT PRODUCT EASE OF USE BOTH ON /0FF
from Dallas, TX on 5/28/2008
Sturdy clips. Easy on and off. Painless!
from Houston, Texas on 5/14/2008
These springs are great. They are well made and they do a great job of taking away the stress of getting fins on and off while you are hanging onto the boat ladder. My wife and I just returned from Bonaire and we found they are just as handy while you are shore diving.
from Boston, MA on 4/16/2008
I have always LOVED my Scuba Pro Twin Jet Fins for their performance in the water but I have always HATED the straps and clasps. They were hard enough to remove in warm water and damned near impossible in cold water. I was seriously considering purchasing another manufacturer's fins that had more give in the strap. I hadn't been able to find another strap or clasp until I saw these on a friend during a recent dive trip. I ordered them immediately upon returning home and I am so very happy that I am able to keep my great fins AND be able to don and remove them with ease. Of course, I will now have to see how long they last with use but for now, I'm very pleased!
from chicago il. on 4/3/2008
very compatible with my gear
from Sacramento, CA on 2/20/2008
no more messing with straps, just put them on and go, no broken straps either
from Kill Devil Hills, NC on 1/23/2008
I am taking the Rescue Diver Course, so I wanted to be able to take my fins on and off quickly.These do the trick.
from San Diego, CA on 1/23/2008
Eliminates the problem encountered with OEM straps that catch on kelp strands when swimming through kelp forests.
from San Antonio, TX on 1/17/2008
Only comment, description describes one strap and does not say they come as a PAIR. I bought two because of this and had to send one pair back. Otherwise, easy to use, great product.
from Emeryville, CA on 1/17/2008
Very easy put on & put off, good product.
from concord,ca. on 11/8/2007
All fins should come standard with these. Ever fight putting your fins on in the surf? Never again with these.
from Manchester, NH on 11/8/2007
Makes donning and removing very easy.
from sc on 10/10/2007
Great straps! This makes putting on fins a snap! One of the best "convenience" investments I've made in my gear. Do your homework, measure and make sure you get the right size!
from Tulsa, OK on 10/10/2007
This is one product every diver would find beneficial to use. This is one of cheapest upgrades of equipment you can make. But one of the better upgrades.
[1 of 1 customers found this review helpful]
from nj on 10/10/2007
makes it easy to put on and take off my fins
[2 of 2 customers found this review helpful]
from Columbia, SC on 10/4/2007
These straps make donning and removing fins a lot easier. Great when boat diving and you have to put your fins on your wrist when exiting without fussing with strap latches. Stainless steel should be more dependable than rubber straps.
They look as functional as they are.
[1 of 1 customers found this review helpful]
from Renton, WA on 9/25/2007
These take all the hassel out of putting on and off of my fins. They have the same clap as the original fin straps so they can be removed easily from a boat and just pull on and off when I am shore diving.
[1 of 1 customers found this review helpful]
from Canada/Turks&Caicos on 9/25/2007
these are a real improvement to the straps that came on my Scupapro Split Fins
[1 of 1 customers found this review helpful]
from Garden Grove, CA on 9/11/2007
One those nifty little devices that makes diving better. Makes getting the fins on for surf entries a heck of a lot easier. I no longer have to readjust my fin straps anymore.
[1 of 1 customers found this review helpful]
To me, one of the hardest parts of diving is getting your fins on, especially from a shore entry. These straps make it so easy to just slide your foot in, grab the strap with one finger, pull, and snap, your fins are on your foot with perfect tension!!! No adjustments or tightening needed.
[2 of 2 customers found this review helpful]
from Brodhead, WI. on 7/31/2007
Great product. I wish that I would have found them sooner.
[2 of 2 customers found this review helpful]
from Rochester NY on 7/31/2007
Gearing up and putting on my fins seemed to always be a pain. Had to adjust the strap and sometime needing adjustment at depth after my foot settled in the fin. Now it's quick on and off, constant tension, no problems. A very worthwhile investment.