Questions about this item:
Shopper Will this fit a Seaquest Balance BCD ?
RICHARD B Im sorry I do not know if it will fit
SCOTT C The Zeagle Octo-Z Airsouce will fit onto the BCD just fine. The issue, however, is whether the inflator hose from your regulator will be compatible with the nipple on the Octo-Z. Seaquest inflators (which I presume you currently have on your Seaquest BCD) use a nipple size that fits neither the standard small gauge nipples nor the larger "scubapro" size. If your inflator hose in incompatible with the Octo-Z, small adaptors are cheap and easy to find. Just make sure to sort this all out before you go diving.
CHET T I don't believe this will fit a SeaQuest BCD right out of the box. However, I don't know if there is a way to adapt it to fit a SeaQuest BCD. I can also tell you that if you are currently using a SeaQuest AirSource on your SeaQuest BCD, you'll also have to change out the air hose that runs to the Octo-Z.
JEFFRY B I dont know. Never owned a Sequest BCD. That being said. I believe the oct hose is a standard size.Fits all.
MARC M I have mine on my Zeagle Stilleto, but I can tell you that the Octo connects to the BCD by way of a garden hose thread. The inflator hose is pretty universal.
JEFF C It should fit, you will take swap out the fitting in the big hose, the Oct Z comes with everything you need. The only problem might be if your hose is a lot different in dia.
ARTHUR K I am not sure about the seaquest, I have installed the Octo-Z on Aeris, Sherwood and Mares BCD's with no problem. I think that if the large BCD inflator hose is standard diameter, it should work.
Shopper Will the Octo-Z fit the BARE Blackwing BCD?
LeisurePro S Yes, this should fit the 1" Bare corrugated hoses.
Shopper Will this fit on to a sherwood BC?
LeisurePro S Sorry, for Sherwood BCDs, you need to check out the Sherwood Gemini.
Shopper Does this octo fit the Zeagle Lazer?
LeisurePro S Yes, this will fit on the Lazer BCD.
Shopper Do I need a special connector so that any universal low pressure hose can be connected it?
LeisurePro S Yes, here is the adapter for using a standard LP hose with the Octo-Z.
Shopper Is the Zeagle Octo Z compatible with Nitrox? Does the Octo Z fit Cressi BCDs?
LeisurePro S The Octo Z is Nitrox compatible to 40%, but unfrotunately, doesn't fit Cressi BCDs.
Shopper Will this fit an oceanic islander BCD?
LeisurePro S You have two choices for the Oceanic Islander: to get the Oceanic combo octo or get the Zeagle combo octo and buy the adapter for it.
Shopper I recently purchased the Zeagle Stiletto BC. I however, did not buy an octopus. I was wondering if this item that i have attached is compatible and is it something i can install or does a dealer have to do it??
LeisurePro S Yes, this will fit on your BCD. The installation is failrly straightforward and you can do it yourself with a few simple tools. If you feel uncomfortable doing it on your own, you can just take it into your local dive shop and they should be able to put it on for you right there in a few minutes (hopefully for free!).
Warranty Information
This product has a limited lifetime warranty.
www.zeagle.com/
(813) 782-5568
Whats in the box:Combination BC Inflator Alternate Air Source, QD LP Hose, Corrugated Hose and Comprehensive Owner's Manual Zeagle's regulators are US made, built under strict controls for quality in our own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The Octo-Z Inflator replaces the conventional BC power inflator and second stage octopus by combining the functions of both into a single unit. When you're taught how to dive you are given practice in buoyancy control more than any other skill. Once you start to dive every time you go underwater, fin the reef, or surface you use buoyancy control. All this time your octopus second stage regulator hangs un-used and out of mind. When a real life out-of-air situation occurs, the stress and anxiety mounts, and you find yourself fumbling for a piece of equipment you never use the Octopus! Combining your inflator devise (that you use on every dive) with your Octopus Regulator assures your ability to react properly when an out-of-air emergency occurs. Be a safe diver with the Octo-Z Breathable Inflator. The Octo-Z is a Dependable Downstream Demand Valve Design Breathable Inflator. The Octo-Z has a Balanced Inflator Valve Design and is manufactured from Brass, Flexible and ridged Thermoplastics, Elastomeric Polymers and Silicone Rubber. The Breathable Inflator weighs 8 oz (213 g) without the hose, providing a Lightweight and Compact Alternative to having both a Standard Inflator Mechanism and a Separate Octopus Regulator. The High-Flow Inflator Hose is 27" (69 cm) in length with 3/8" Threads. The Octo-Z is also equipped with a Threaded Coupling that allows you to attach the end of the BC Corrugated Hose to a Garden Hose for Easy and Effective Rinsing of the BCD's Air Bladder. This feature also allows you to disconnect the Octo-Z for storage with your Primary Regulator. The combining of the Alternate Air Source and Inflator Mechanism also eliminates a Hose and Streamlines your Profile when diving. The Octo-Z comes with a Comprehensive Owner's Manual and is covered by a Limited Lifetime Warranty.
- Zeagle Octo-Z Alternate Air Source
- Combines Octopus Regulator with Power Inflator
- Eliminates a Hose
- Streamlines Your Profile Underwater
- Easier to Use then Octopus
- Increased Safety in Diving
- High Flow QD 27" (69 cm) 3/8" Thread Hose Connections for Air Supply
- Corrugated Hose Disconnect (Octo-Z can easily be stored with regulator)
- Corrugated Hose Rinse Connection (Use garden hose to effective rinse BCD Bladder)
- Light, Rugged Design
- Weight: 8 oz (213 g) w/o Hose
- Materials: Brass, Flexible & Ridged Thermoplastics, Elastomeric Polymers and Silicone Rubber
- Comprehensive Owner's Manual
- Limited Lifetime Warranty
- Made in the USA
| Nitrox Compatible | Yes | | 2'nd Stage Type | Downstream Demand Valve | | Materials | Brass, Flexible & Ridged Thermoplastics, Elastomeric Polymers and Silicone Rubber | | Hose Thread | 3/8" | | Hose Length | 27" (69 cm) | | Total Weight | 8 oz (213 g) w/o Hose | | Weight [with packaging] | 1.25 lb |
4/29/2012 2.0Going back to regular octopus By SteveHutch from Atlanta, GA - Easy To Connect
- Easy To Retrieve
- Easy To Use
- Diving Type:
- Night Diving, Open Water Diving, Wreck Diving
- Was this a gift?:
- No
4/13/2011 5.0Great way to get rid of extra hoses! - Comfortable Mouthpiece
- Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Slim Design
- Eliminating Hoses
- Last Resort
- Upgrading Equipment
- With Nitrox
- Diving Type:
- Drift Diving, Open Water Diving, Wreck Diving
- Was this a gift?:
- No
1/17/2011 (1 of 1 customers found this review helpful) 1.0I have had two and both have failed - Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Wreck Diving
- Was this a gift?:
- No
2/3/2010 5.0A need for any BC!!!!! - Comfortable Mouthpiece
- Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Slim Design
- Eliminating Hoses
- Last Resort
- Upgrading Equipment
- Diving Type:
- Cave Diving, Drift Diving, Night Diving, Open Water Diving, Rescue Diving, Wreck Diving
By Softshark from Sparwood, BC, Canada - Comfortable Mouthpiece
- Easy To Connect
- Easy To Use
- Slim Design
- Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Wreck Diving
|