Dan C i have a Aqua DIN to Yoke Regulator Converter (A100) ,is that fit ??
MARTIN B I'm not quite sure what you are asking, but most DIN valves are sold with an insert so that they can be filled with a whip that has a yoke on the end of it. If filling with a DIN fitting, the insert needs to be removed. Once it is removed then the DIN Tank Pressure Checker can be used to see how much gas you have. I also have yokes that can be put on DIN regulators to use them with tanks that have standard valves, and they can be put on the DIN tank Pressure Checker to see what's in a tank with a standard valve. Personally I have two tank guages, one for each type of valve.
PETE D If you are asking if this gauge can be used on a yoke valve using a din to yoke converter, the answer is yes. I check my yoke valve taks all the time with this pressure checker and using a converter. I am also very happy with the checker itself.
TIBOR T No, that's a pressure guage with a DIN fitting.
JERRY K Yes, it will work. I have the same one and using DIN to Yoke converter can check pressure in tanks with Yoke type valves.
ROBERT R If you have a female din to a yoke converter you should be able to screw this on and read standard yoke tanks as well as DIN tanks.
KAREN F You are going to put the adapter on this unit and then check your tank, right. That should work fine.