Manta's patented stainless steel back plate is built right here in the USA. Back-Plate is completely made of corrosion resistant brushed (304) stainless steel for durability and long life. Back-Plate is designed to allow easy threading of a harness without the use of keepers. Multiple slots cut into the plate allow custom harness rigging; allow attachment of a wide variety of accessories and lanyards. Back-Plate easily accommodates either single or double cylinder configurations. Back-Plate weighs 5 lbs (2... more
Tags: MNTBP, Manta, Buoyancy Compensators, Essential Equipment, Manta Stainless Steel Back-Plate
|
The X-Tek Form Tek Harness is a Three-Piece Form-Harness-System with padded shoulders and Anatomically Optimized Back Pack for the ultimate in comfort is equipped with Quick Release Buckles on both left and right shoulders and a Cross-Chest Sternum Strap all for easy removal. The Shoulder and Sternum Straps are Adjustable for a Custom Fit. System comes standard with a Stainless Steel Back-Plate and is convertible for single cylinder use. The Form Tek System has more D-Rings for attachment of accessories than most Tek Setups on the market. Four Large D-Rings on the Shoulders... more
Tags: SCPXTFTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Form Tek Harness System with Stainless Steel Back Plate
|
Highland by XS Scuba's Stainless Steel Back-Plate is made from Durable and Corrosion Resistant 11 Gauge (.115"/2.92 mm) 316 Grade Stainless Steel. Back-Plate weighs in at 5 lbs (2.27 kg) and is Laser Cut for Dimensional Accuracy. To Protect the Harness Webbing, the Stainless Steel Back-Plate has CNC-Machined Beveled Edges and a final "Polished Finish" by Hand for Smooth Slots and Holes. Back-Plate has Angled and Horizontal Slots for "Straight" or "Cross-Over" Shoulder Strap Configurations, Mounting Holes at 11" (27... more
Tags: XSSSSB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Steel Back-Plate
|
Greg Flanagan first invented the metal back-plate using aluminum in 1979 for North Florida cave divers. He realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the diver's center of gravity (tanks) being surrounded by the center of buoyancy (BC wings). Plus, the diver gains a clean chest area with room for gear attachment points on the harness. Bill Hogarth Main went on to popularize the back-plate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig... more
Tags: General Accessories,Dive-Rite 2116,Dive-Rite Stainless Steel Back-Plate,Assorted Accessories,Stainless Steel Backplate,Dive-Rite,Dive-Rite Backplate,Div 2116,Dive Rite
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System with Stainless Steel Back Plate
|
Back plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 5.75 lbs and include the following slots: 1" and 2" width Crotch Strap, (2) Cam Band, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Stainless Steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness The OMS Comfort Harness System II is perfect for those who want a quality diving harness... more
Tags: OMSCHS2SLU, OMS, Buoyancy Compensators, Essential Equipment, OMS Comfort Harness System II with Stainless Steel Back Plate Un-Strung Large
|
Traveling with a Heavy Stainless Steel Back-Plate can add unnecessary weight to your baggage limit, costing you additional travel fees. Lighten the load when you travel with your Scubapro X-Tek Form Harness Assembly. This X-Tek Soft Travel Back-Plate is easy to install on your Harness and will allow easy packing and lighter weight for the traveling Technical Diver. Soft Back-Plate is made from Durable Nylon Fabric and Webbing with Taped and Sewn Edges for added Strength and Durability... more
Tags: SCPXTTA, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Soft Travel Back-Plate
|
Technical Divers who use Aluminum or Stainless Steel Back-Plates have a need for Attachment of Accessory Items. Most Back-Plates have Holes on them specifically for this purpose. Book Screws are used to anchor the accessory in place to keep them secure and close at hand. Highland by XS Scuba's Stainless Steel Book Screws are Non-Rusting and allow the diver to Attach Accessories to their Back-Plate. Book Screws come as a complete set with both Male and Female Threaded Components and include Friction O-Rings. Book Screws are designed to pass through 3/8" (9.5 mm) Back-Plate Holes... more
Tags: XSSBS, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Book Screw, Complete Set
|
Do your Weights Slide Back-and-Forth on your Weight Belt? Sometimes they slide far enough to open the Weight Belt Buckle. Swimming Underwater with your Weight Belt slipping down over your thighs is not a pretty sight nor is it safe! Do you always need somewhere to Clip an extra Accessory Item? If these are concerns of yours you can fix both problems with these Weight keepers. This Stainless Steel Weight Keeper with D-Ring will eliminate those problems for ever. Here's how it works. Thread through the first belt slot on a weight and then thread the 2" (5... more
Tags: AQUSDR, Aqua, General Accessories, Assorted Accessories, Stainless Steel Weight Keeper with D-Ring
|
Greg Flanagan first invented the metal back-plate using aluminum in 1979 for North Florida cave divers. He realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the diver's center of gravity (tanks) being surrounded by the center of buoyancy (BC wings). Plus, the diver gains a clean chest area with room for gear attachment points on the harness. Bill Hogarth Main went on to popularize the back-plate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig... more
Tags: DIV1034, Dive Rite, General Accessories, Assorted Accessories, Dive-Rite Aluminum Back-Plate, Black Anodized
|
New size! Dive Rite's Single Tank Adapter (STA) has been Re-Sized to fit squarely in the opening of Dive Rite's Travel and Voyager Series Wings. For divers who frequently switch between Double Tank and Single Tank Rigs, Dive Rite's Single Tank Adapter is a convenient way to attach Cam Straps to a Hard Metal Back Plate that does not have Tank Band Slots. Increase the Versatility of your Set-Up with this Single Tank Adapter. Adapter is constructed of Marine Grade 304-Stainless Steel, comes with Mounting Hardware, measures 13" x 3-3/8" (33 x 8.5 cm) and weighs 1.1 lbs (0.5 kg)... more
Tags: DIV1090SS, Dive Rite, General Accessories, Assorted Accessories, Dive-Rite Stainless Steel Single Tank Adapter (STA)
|
If you are not using steel cylinders, try to use one and you will soon realize what you have been missing. Faber can offer you the most comprehensive range of cylinders for Scuba Diving. Every year we produce and sell around the world 100.000 cylinders for scuba diving (out of 600.000 in totals). No other manufacturer in the world can match our capabilities and the breadth of our range. Faber Tanks and valves are nitrox ready... more
Tags: FBRHP100, Faber, Tanks, Essential Equipment, Blue Steel Faber High Pressure Steel Tank 100 CF, 12.9L
|
If you are not using steel cylinders, try to use one and you will soon realize what you have been missing. Faber can offer you the most comprehensive range of cylinders for Scuba Diving. Every year we produce and sell around the world 100.000 cylinders for scuba diving (out of 600.000 in totals). No other manufacturer in the world can match our capabilities and the breadth of our range. Faber Tanks and valves are nitrox ready... more
Tags: FBRLP108, Faber, Tanks, Essential Equipment, Blue Steel Faber Low Pressure Steel Tank 108 cu, 17L
|
The 3rd installment of Cory Lopez's signature series, The Lopex III is bigger, bolder and built to fly around the world and back. Watch has six display modes including normal time, world time, alarm, stopwatch, recall, and timer. The Lopex III has a depth rating of 330' (100 meters), has Electro luminescence (EL) Night Vision backlight for low light situations, 12 or 24 hour format, year, month and day displays. Don't get on a plane without one. With its 24-city world time function it will allow you to view the time in the selected city with a three letter city designation code... more
Tags: FSTL3SBK, Freestyle, Watches, Add-On Gear, Shark By Freestyle Lopex III Men's Watch Stainless Steel ,With Black Strap
|
|