Many divers have come to appreciate the Ruggedness, Simplicity, and Stability of Metal Back-Plates in a Buoyancy System. Now you can have a range of Back-Plate Buoyancy Options that take full advantage of Zeagle's flexible sizing and wide range of bladder options. There are 2 Harness Assemblies to choose from a Standard or Deluxe Harness attached to a Lightweight Anodized Aluminum Back-Plate. The Standard Harness Consist of a 1 Piece Webbing Harness with a Durable Non-Corrosive Plastic Waist Buckle. The Standard Harness comes equipped with four 2" (5... more
Tags: ZGLHABP, Zeagle, Buoyancy Compensators, Essential Equipment, Zeagle Harness and Anodized Aluminum Back-Plate Standard Harness Anodized Aluminum Plate
|
Back Plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 5.75 lbs and include the following slots: 1" and 2" width Crotch Strap, (2) Cam Band, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Stainless Steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness: The OMS Deluxe Harness System is perfect for those who want a quality diving harness... more
Tags: OMSSSPHU, OMS, Buoyancy Compensators, Essential Equipment, OMS 6 lb. Un-Strung Standard Harness with Stainless Back plate
|
Back Plates: OMS's superior d- burring process eliminates back plate sharp edges and prevents abrasion to webbing and BC's. The Aluminum Back Plate weighs 1.75 lbs include the following slots: 1" and 2" width Crotch Strap, (2) Cam band, and a bottom slot to accommodate bandbolts that are slightly off 11" On Center. The Aluminum Plate is Hard Coat Anodized. Harness: The OMS deluxe harness is perfect for those who want a quality diving harness with a single left side quick release. The deluxe harness is a cross shoulder harness... more
Tags: OMSABPHU, OMS, Buoyancy Compensators, Essential Equipment, OMS Un-Strung Standard Harness with Aluminum Back plate (BP020-SH)
|
The X-Tek Form Tek Harness is a Three-Piece Form-Harness-System with padded shoulders and Anatomically Optimized Back Pack for the ultimate in comfort is equipped with Quick Release Buckles on both left and right shoulders and a Cross-Chest Sternum Strap all for easy removal. The Shoulder and Sternum Straps are Adjustable for a Custom Fit. System comes standard with a Stainless Steel Back-Plate and is convertible for single cylinder use. The Form Tek System has more D-Rings for attachment of accessories than most Tek Setups on the market. Four Large D-Rings on the Shoulders... more
Tags: SCPXTFTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Form Tek Harness System with Stainless Steel Back Plate
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System with Stainless Steel Back Plate
|
The Highseas harness is here. This durable and rugged designed harness comes with a set of four standard Dee's (HR-1) or Deluxe (HR-1T) has Shoulder Drop Dee's (SR-1's), a rigid, easy to hit ring with only 1.25" (3.2 cm) of standoff at approximately 10-and accommodates the largest clip and carabineers. They offer the most efficient means for slinging bottles to the harness. The (WR-2's), fixed waist staging rings are the complimentary partner to the Shoulder Drop Dee with their 40- to the base D-rings. Used as lower clip-off locations for slinging bottles... more
Tags: MNTHR1D, Manta, Buoyancy Compensators, Essential Equipment, Manta HR-1 Harness With Standard D Rings
|
The Highseas one piece harness is ideal for divers looking to eliminate failure points. This durable and rugged designed comes with 12' (3.66 meters) of 2" (5.1 cm) black webbing with a grommet, 6 SS D-rings, 6 SS keepers (HR-2),or (HR-2T) 2 Shoulder Drop Dee's (SR-1's), a rigid, easy to hit ring with only 1.25" (3.2 cm) of standoff at approximately 10-and accommodates the largest clip and carabineers. They offer the most efficient means for slinging bottles to the harness. The (WR-2's)... more
Tags: MNTHR2D, Manta, Buoyancy Compensators, Essential Equipment, Manta HR-2 One Piece Harness With Standard D Rings
|
The Highseas harness is here. This durable and rugged designed harness comes with a set of four standard Dee's (HR-3) or Deluxe (HR-3T) has Shoulder Drop Dee's (SR-1's), a rigid, easy to hit ring with only 1.25" (3.2 cm) of standoff at approximately 10-and accommodates the largest clip and carabineers. They offer the most efficient means for slinging bottles to the harness. The (WR-2's), fixed waist staging rings are the complimentary partner to the Shoulder Drop Dee with their 40- to the base D-rings. Used as lower clip-off locations for slinging bottles... more
Tags: MNTHR3D, Manta, Buoyancy Compensators, Essential Equipment, Manta HR-3 Harness with Quick Release With Standard D Rings
|
Embraced by DIR purists who prefer a Streamlined Rig without Buckles, Chest Strap or Padding, the Basic Harness is a Clean, Simple Harness intended for use with Hard Metal Back Plates. 2" (5.1 cm) Nylon Webbing provides Strength with 7,000 lbs (3,175 kg) of Tensile Strength, yet is soft and won't dig into the body. Harness is adjustable by cutting off excess webbing once diver has seized the harness to his body stature. Webbing includes a Stainless Steel Grommet at the Midpoint for Access to Upper Bolt Hole. Harness is a continues 11' (3.35 meters) of Standard 2" (5... more
Tags: Essential Equipment,Dive Rite Basic Harness,Div1063,Dive-Rite Harness,Standard Harness,Buoyancy Compensators,Dive Rite
|
A Webbing Harness designed for Hard Back-Plates that provides Comfort and Streamlining. Swivel Points on the Shoulder Straps ensure a Comfortable Fit, which is especially important for women and, also, men with broad shoulders. A Chest Strap (sternum strap) keeps the Harness in place. 2" (5.1 cm) Nylon Webbing provides Strength with 7,000 lbs (3,175 kg) of Tensile Strength, yet is soft and won't dig into the body. Webbing includes a Stainless Steel Grommet at the Midpoint for Access to Upper Bolt Hole. A Standard 6' (1.83 meter) length of 2" (5.1 cm) Webbing forms the Upper Harness and 3' (0... more
Tags: Essential Equipment,Dive-Rite Deluxe Harness,Deluxe Harness,Div1080,Dive-Rite Harness,Dive-Rite,Buoyancy Compensators,Dive Rite
|
The BCJ-9300C Selene II is an updated and redesigned model of the best-selling ladies BCJ-9100 Selene. Designed exclusively for the female diver, the Selene II's comfortable fit is supported by a number of leading technologies. In addition, the BCJ-9300C is equipped with TUSA's Active Purge Assist System (A.P.A.) optimizing jacket performance. TUSA's Active Purge Assist system is a revolutionary new BCJ accessory technology. This pneumatically assisted purge system and newly designed OPEV (Over Pressure Exhaust Valve) offers significantly enhanced flow rates over a standard inflator system... more
Tags: TBTJ93CLR, Tusa, Buoyancy Compensators, Essential Equipment, Tusa Selene II BCD with Active Purge Assist, Black (BCJ-9300C) Large
|
The Express Tech Deluxe Back Inflator BCD with Ripcord Weight System is an Ultra Light Weight, Super Compact Traveling BC Pack with features never before found in a rig this small. The unique Back Plate is Reinforced with a Polymer material that gives the support needed and the flex desired for a comfortable fit. The system comes standard with a 24 lbs (10.89 kg) Compact Bladder with Elastic Retractors to keep its' Profile Small. Two sets of Center Plate Grommets allow for attaching Twin Cylinder Assemblies via the bolt and nut arrangement that most tech systems use... more
Tags: ZGLETDR, Zeagle, Buoyancy Compensators, Essential Equipment, Zeagle Express Tech Deluxe BCD with Ripcord Weight System
|
The Express Tech Deluxe Back Inflator BCD with Zip Touch Weight System is an Ultra Light Weight, Super Compact Traveling BC Pack with features never before found in a rig this small. The unique Back Plate is Reinforced with a Polymer material that gives the support needed and the flex desired for a comfortable fit. The system comes standard with a 24 lbs (10.89 kg) Compact Bladder with Elastic Retractors to keep its' Profile Small. Two sets of Center Plate Grommets allow for attaching Twin Cylinder Assemblies via the bolt and nut arrangement that most tech systems use... more
Tags: ZGLETDZ, Zeagle, Buoyancy Compensators, Essential Equipment, Zeagle Express Tech Deluxe BCD with Zip Touch Weight System
|
|