Having the right tool when you need it can make the difference between a great dive and no dive at all. Don't have your day of diving cut short due to an equipment failure that can be fixed with a simple tool. This "All in One" Dive Tool can make the day go right. Tool has both Phillips and flat blade screwdrivers, adjustable crescent wrench. Hex keys and a fib for untying stubborn nuts. Scuba Master All in One Tool is a great item for your Save-A-Dive Kit. Tool is all Stainless steel super crescent wrench multi tool kit with contoured super grip frame.... more
Tags: Stainless Steel Scuba Master "all in One" Dive Tool Red,All in One Tool,General Accessories,Dive Tool,Scuba Master,Assorted Accessories,Aqua
|
Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB7, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 7.25" 2.5" WIDTH
|
You ever see non-stainless steel tools when they have been exposed to salt water environments? Not a pretty sight. It also looks bad when you pull out your rusted open-end steel 1/2"x 5/8" or 9/16 x 11/16" to remove or replace a standard 9/16" or high flow 11/16" second-stage hose. Many of the new low-profile designed hose fittings may not even allow you to use a standard wrench... more
Tags: AQUDWS, Innovative Scuba, General Accessories, Assorted Accessories, Dive Wrench Stainless Steel Set
|
Technical Divers who use Aluminum or Stainless Steel Back-Plates have a need for Attachment of Accessory Items. Most Back-Plates have Holes on them specifically for this purpose. Book Screws are used to anchor the accessory in place to keep them secure and close at hand. Highland by XS Scuba's Stainless Steel Book Screws are Non-Rusting and allow the diver to Attach Accessories to their Back-Plate. Book Screws come as a complete set with both Male and Female Threaded Components and include Friction O-Rings. Book Screws are designed to pass through 3/8" (9.5 mm) Back-Plate Holes... more
Tags: XSSBS, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Book Screw, Complete Set
|
Good Quality all 304-Stainless Steel Buckle is Corrosion and Impact Resistant for Durability and years of Reliable Service. Great item for a Save-a-Dive Kit Highland by XS Scuba's Stainless Steel Harness Buckle has a Solid Stainless Steel Hinge Pin and a Positive Cam Lock Lever for great Security and Positive Retention. Buckle is designed to be used with Standard 2" (5.1 cm) Webbing.... more
Tags: XSSHB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Harness Buckle
|
This JBL shaft is for Mares Long Tom, Scuba Pro Magnum 105, AB-Biller 48 Special, Cressi 100 and JBL (JBL4D46) Spear Guns. The JBL7339S shaft is 39" (991 mm) long with a 5/16" (8 mm) diameter. Having spare parts for your gun or sling is the only way to assure you won't get skunked on a spear fishing trip. Constructed of corrosion resistant 17-4 (spring) stainless each shaft is hand-tuned for alignment then heat-treated for maximum hardness to reduce flex and provide optimum energy transfer. OEM shafts for JBL, A.B. Biller, Mares... more
Tags: JBL7339S, JBL, General Accessories, Assorted Accessories, JBL Stainless Steel 39" X 5/16" (991 mm X 8 mm) Adapt-A-Shaft for Scuba Pro Magnum 105, Mares Long Tom, AB-Biller 48 Special, Cressi 100 and JBL Spear Guns Model JBL4D46
|
This JBL shaft is for Mares Frontiersman, Scuba Pro Magnum 70, AB-Biller 36 Special, Cressi 70, Arbelete AR423, Dacor 7335 and JBL (JBL4D22/4D44) Spear Guns. The JBL7427 shaft is 27" (686 mm) long with a 5/16" (8 mm) diameter. Having spare parts for your gun or sling is the only way to assure you won't get skunked on a spear fishing trip. Constructed of corrosion resistant 17-4 (spring) stainless each shaft is hand-tuned for alignment then heat-treated for maximum hardness to reduce flex and provide optimum energy transfer. OEM shafts for JBL, A.B. Biller, Mares, Scuba Pro, Arbalete... more
Tags: JBL7427, JBL, General Accessories, Assorted Accessories, JBL Stainless Steel 27" X 5/16" (686 mm X 8 mm) Adapt-A-Shaft for Scuba Pro Magnum 70, Mares Frontiersman, AB-Biller 36 Special, Arbalete AR423, JBL (JBL4D22/4D44), Cressi 70 , Dacor 7335 Spear Guns
|
This JBL shaft is for Arbalete AR428, Dacor 7324, AB-Biller 24 Special LTD, Mares Snub-Nose and JBL (JBL4D22/4D32/4D33) Spear Guns. The JBL7517S shaft is 17" (432 mm) long with a 5/16" (8 mm) diameter. Having spare parts for your gun or sling is the only way to assure you won't get skunked on a spear fishing trip. Constructed of corrosion resistant 17-4 (spring) stainless each shaft is hand-tuned for alignment then heat-treated for maximum hardness to reduce flex and provide optimum energy transfer. OEM shafts for JBL, Arbalete, Mares... more
Tags: Jbl7517s,Shaft Ab-Biller,General Accessories,Jbl,Jbl Stainless Steel 17" X 5/16" (432 X 8 Mm) Adapt-a-Shaft for Dacor 7324, Mares Snub-Nose, Arbalete Ar428, Ab-Biller 24 Special Ltd and Jbl (Jbl4d20/4d32/4d33) Spear Guns,Jbl Spearguns,Assorted Accessories,Shaft for Scuba Pro,Shaft Mares
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System with Stainless Steel Back Plate
|
Designed to adjust your trim when using a set of double cylinders, the XS Scuba Tail Weight Pouch attaches to cylinder with lower cylinder band bolts. Nylon Mesh Pouch is equipped with two Stainless Steel Grommets for attachment and has a sealed opening with double Velcro closure to keep lead secure regardless of your body position underwater. All seams are sewn for strength and durability. Just pour in your lead shot up to 6 lbs (2.7 kg) or with its wide opening which allows the use of hard weights up to 5 lbs (2.27 kg)... more
Tags: XSSWB500, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Tail Weight Pouch (WB500)
|
Designed to adjust your trim when using a set of double cylinders, the XS Scuba V" Nylon Mesh Weight Pouch attaches to back-plates center groove with cylinder band bolts. Pouch is equipped with two stainless steel grommets 11" (27.9 cm) center-to-center for attachment and has a sealed opening with double Velcro closure to keep lead secure regardless of your body position underwater. Just pour in your lead shot up to7 lbs (3.16 kg). All seams are sewn for strength and durability... more
Tags: XSSWB550, XS Scuba, General Accessories, Assorted Accessories, XS Scuba "V" Weight Pouch (WB550)
|
Need an extra attachment point on your diving rig? XS Scuba's Clear-Path Buckle Bale Kit can add an attachment point for snaps, clips lanyard etc. to your Weight Belt Buckle.(Buckle needs to be purcased separately, SKU# XSSCBU) Kit includes everything you need to set up a weight belt Buckle, with this unique attachment point. A Heavy-Duty 316-Grade Stainless Steel 6 mm Thick D-Ring is easy to install and comes complete with a Stainless Steel Hinge Pin, two 3 mm Hex Key Screws and C-Clip ... more
Tags: XSSCBUK, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Clear-Path Buckle Bale Kit
|
Technical Divers need redundant safety back-ups on most all their equipment to assure the safest dive techniques allowed. A First-Stage Regulator should work well when it is maintained properly, yet if it does malfunction added safety features can make the difference between a controlled emergency and a diving accident. Incorporating a safety relief valve on your First-Stage regulator allow an over pressurization of the 2nd-Stage Hose nearly imposable. XS Scuba's Deluxe Over-Pressure Valve (OPV) is an Adjustable all Stainless Steel Constructed Valve... more
Tags: XSSDOPV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Deluxe Over Pressure Valve
|
XS Scuba's Deluxe K Valves are designed and manufactured for long life and heavy use. The Deluxe K-Valve is no exception. Valve is made of marine grade brass with triple bright chrome plating for long life protection in salt water. Precision Machined from high tension brass and chrome plated valve stems for years of service and corrosion free operation. Easy Grip soft rubber Safety Hand Wheel with stainless steel insert ensures long life and large ribs make turning handle easy even when wearing gloves... more
Tags: XSSDKV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Deluxe K Valve
|
XS Scuba's DIN Valves are designed and manufactured for long life and heavy use. The DIN Valve is no exception. Valve is made of marine grade brass with triple bright chrome plating for long life protection in salt water. Precision Machined from high tension brass and chrome plated valve stems for years of service and corrosion free operation. Easy Grip soft rubber Safety Hand Wheel with stainless steel insert ensures long life and large ribs make turning handle easy even when wearing gloves... more
Tags: XSSDV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba DIN Valve
|
|