Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB7, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 7.25" 2.5" WIDTH
|
Manta's patented stainless steel back plate is built right here in the USA. Back-Plate is completely made of corrosion resistant brushed (304) stainless steel for durability and long life. Back-Plate is designed to allow easy threading of a harness without the use of keepers. Multiple slots cut into the plate allow custom harness rigging; allow attachment of a wide variety of accessories and lanyards. Back-Plate easily accommodates either single or double cylinder configurations. Back-Plate weighs 5 lbs (2... more
Tags: MNTBP, Manta, Buoyancy Compensators, Essential Equipment, Manta Stainless Steel Back-Plate
|
Putting together a set of cylinders and you're looking for a durable, well built and corrosion resistant cylinder cam band, than look no further, Manta has what you are looking for. The Manta Industries & Highseas Millwork (304L) stainless steel cam buckle with durable 2" (5.1 cm) nylon webbing bands are built to fit up to an 8" (20.3 cm) diameter tank. Cam Band is made in the USA and comes with a 60 month limited warranty.... more
Tags: MNTSCB, Manta, General Accessories, Assorted Accessories, Manta Stainless Steel Cam Bands (1)
|
Back plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 5.75 lbs and include the following slots: 1" and 2" width Crotch Strap, (2) Cam Band, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Stainless Steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness The OMS Comfort Harness System II is perfect for those who want a quality diving harness... more
Tags: OMSCHS2SLU, OMS, Buoyancy Compensators, Essential Equipment, OMS Comfort Harness System II with Stainless Steel Back Plate Un-Strung Large
|
Does your BCD use the less durable plastic cam buckles and you want to up-grade to a more durable system? OMS NEW Cam Buckle in Polished Stainless Steel can be used to attach cylinders directly to the Back plate IQ Pack, or the Single Tank Adapter. Super hold Velcro is utilized to keep the straps in place.... more
Tags: Oms Stainless Steel Buckle,General Accessories,Buckle with Cam Band,Oms 36" Stainless Steel Buckle with 2" Cam Band,Assorted Accessories,Oms
|
Mounting systems for pony bottles can have you pulling your hair out just to get them set up on your rig. XS Scuba's Highland Stainless Steel Pony Mount removes all the frustration and makes the attaching and detaching a breeze. Made from (316 grade) stainless steel for corrosion resistant durability and long life this unique mounting system comes equipped with rubber feet to protect your cylinders finish. Pony Mount allows mounting of pony bottle on right or left side and upright or upside-down. Pony Mount is designed to fit 6.9" to 8.0" (17.5 to 20... more
Tags: XSSSSPM, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Pony Mount
|
The X-Tek Form Tek Harness is a Three-Piece Form-Harness-System with padded shoulders and Anatomically Optimized Back Pack for the ultimate in comfort is equipped with Quick Release Buckles on both left and right shoulders and a Cross-Chest Sternum Strap all for easy removal. The Shoulder and Sternum Straps are Adjustable for a Custom Fit. System comes standard with a Stainless Steel Back-Plate and is convertible for single cylinder use. The Form Tek System has more D-Rings for attachment of accessories than most Tek Setups on the market. Four Large D-Rings on the Shoulders... more
Tags: SCPXTFTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Form Tek Harness System with Stainless Steel Back Plate
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System with Stainless Steel Back Plate
|
XS Scuba's Pro Valves are designed and manufactured for long life and heavy use. The Pro Valve is no exception. Valve is made of marine grade brass with triple bright chrome plating for long life protection in salt water. Precision Machined from high tension brass and chrome plated the valve stems will give years of service and corrosion free operation. Easy Grip soft rubber Safety Hand Wheel with Stainless Steel Insert ensures long life and large ribs make turning handle easy even when wearing gloves... more
Tags: XSSPVLP, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Pro Valve LP Series Steel Cylinders
|
he Single Cylinder Mounting Plate allows you to convert your system to a single cylinder system when larger air supplies are not required. Easy to install comes equipped with mounting bolts, bolts have square shank for retention ease and butterfly nuts for quick assembly. Also included is a stainless steel cam band for durability, more stability and long life.... more
Tags: HLSSTAS, Hollis Gear, Buoyancy Compensators, Essential Equipment, Hollis Stainless Single Cylinder Mounting Plate with Bolts & Stainless Cam Band
|
Tired of having to loosen the cam band each and every time you need to slide it over the top of your cylinder to mount your BCD, or even worse you have already mistakenly mounted your regulator before your BCD. Whichever the problem XS Scuba's unique cam band have a hoop/buckle to allow complete separation of the buckle from the strap webbing allowing you to wrap the band around the cylinder to mount, not having to slide it over the cylinder neck as with standard cam bands... more
Tags: XSSTBCB, Highland Millworks, General Accessories, Assorted Accessories, XS Scuba Tank Bands with Stainless Steel Cam Buckles (Pair)
|
The Hollis Back plate is engineered to fit closer to the cylinders preventing Gapeosis, creating a tighter profile and as a result reduces drag. The edges on the outside of the Hollis Back plate are radius formed to fit the Hollis BC, thereby preventing Back plate chafing of the BC. The Webbing that passes through the slots in the Back plate must continue to function throughout the dive season without appreciable abrasion. The slots, holes and edges of the Hollis Back plate are fully de burred eliminating sharp edges that can cut you and your harness system. Weight Stainless: 5... more
Tags: HLSSBP, Hollis Gear, Buoyancy Compensators, Essential Equipment, Hollis Stainless Steel Backplate
|
XS Scuba's Physical Vapor Deposition (PVD) Finish Pro Valve has the same type of long lasting finish you find on expensive faucets, high-end door lock sets and premium watches. PVD is not only a beautiful finish, but is also extremely durable. Before assembly the finished marine grade brass with triple bright chrome plating parts receive the PVD finish process. The parts are placed in a vacuum chamber, where a high power electric arc is discharged at the source material blasting away some into a highly ionized vapor which is deposited on the parts... more
Tags: XSSPVDPVX, XS Scuba, General Accessories, Assorted Accessories, XS Scuba PVD Pro Valve X-Series Steel Cylinder
|
You want high lift? Zeagle delivers with the Big Bertha and Little Bertha Dual Inflator Redundant Bladder Assemblies. Two independent 85 or 55 lbs (38.5 or 24.95 kg) lift inner bladders inside a single bladder cover are the ultimate in lift! Bladders come equipped with Zeagle's Bx Power Inflator Assemblies. Both the Bertha and the Little Bertha have 2 Bx Inflators and 2 Over Pressure Relief Valve (OPV) with Pull Dump Cords. Each Bladder has one of its Bx Inflators equipped with a Cable Activated Rapid Exhaust (RE) Valve... more
Tags: ZGLSSBP, Zeagle, Buoyancy Compensators, Essential Equipment, Zeagle Back-Plates Stainless Steel
|
Back Plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 5.75 lbs and include the following slots: 1" and 2" width Crotch Strap, (2) Cam Band, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Stainless Steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness: The OMS Deluxe Harness System is perfect for those who want a quality diving harness... more
Tags: OMSSSPHU, OMS, Buoyancy Compensators, Essential Equipment, OMS 6 lb. Un-Strung Standard Harness with Stainless Back plate
|
The steel cylinders are manufactured at Worthington Cylinder's state of the art facility in Tilbury, Canada. The cylinders are manufactured using the Deep Draw and Ironing (DDI) process. Cylinders start from a circular plate of chrome-moly steel. Multiple draws on a hydraulic press transform the plate into an open ended shell. The shell is then closed, the neck is formed and the threads are machined. The DDI process produces the most consistence wall thickness resulting in the lightest weight, most efficient cylinders... more
Tags: XSSHP65, Worthington, Tanks, Essential Equipment, XS Scuba Worthington Cylinder HP 65 (8.2 liter) Steel 3442 psi (230 bar) Tank
|
|