This specially designed hanger is built specifically to hang your expensive BC and Regulator System (Yoke or DIN). It allows proper drying and keeps them off the floor to prevent damage. XS Scuba's Basic BC Hanger is anything but basic! Hanger is constructed from Sturdy One-Piece Noncorrosive Plastic for Durability and long Life. With Tough X-Beam Design and a Beefy 1.0" (2.5 cm) Support Beams it won't matter how wet your gear may be. Hanger has Lower Hooks to Hold a Regulator by the Hoses so when stored on the hanger there is No Stress on the Important Hose Fittings. Hanger Measure 15.8" x 9... more
Tags: XSSB2XL, XS Scuba, Hoods, Exposure Protection, XS Scuba 2 mm Tropic Beanie 2X-Large
|
This specially designed hanger is built specifically to hang your expensive BC and Regulator System (Yoke or DIN). It allows proper drying and keeps them off the floor to prevent damage. XS Scuba's Basic BC Hanger is anything but basic! Hanger is constructed from Sturdy One-Piece Noncorrosive Plastic for Durability and long Life. With Tough X-Beam Design and a Beefy 1.0" (2.5 cm) Support Beams it won't matter how wet your gear may be. Hanger has Lower Hooks to Hold a Regulator by the Hoses so when stored on the hanger there is No Stress on the Important Hose Fittings. Hanger Measure 15.8" x 9... more
Tags: XSSBBCHYL, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Basic BC Hanger Yellow
|
The XS Scuba Cargo Pocket is a versatile Detachable Pocket that can be attached to the diver in 3 different ways. Pocket can be attached to either 2" (5.1 cm) Nylon Webbing such as a Weight Belt or Harness Straps. The Pocket can also be attached to a 4" (10.2 cm) Cummerbund or with the use of 2 Noncorrosive Gate Clips it can be attached to your BCD. XS Scuba's Cargo Pocket is made from Durable Nylon, is a Deep Bellowed Pocket with a Velcro Closure. Cargo Pocket has Stainless Steel Side and Bottom Grommets for Rapid Drainage when you exit the water and an Interior Mesh Divider for Organization... more
Tags: XSSCP, XS Scuba, Gear Bags, Add-On Gear, XS Scuba Cargo Pocket
|
The XS Scuba Companion Travel BCD is what you are looking for in a Lightweight great Lift BCD. The Companion is 40% lighter than traditional BCD's weighing in at a mere 5 lbs (2.27 kg) and boasts a 30 lbs (13.61 kg) lift capacity in a Back Inflation Style Air Cell. Exclusive Micro-Pac Backpack gives the stability of a "hard pack" and the comfort of a "soft pack". It also makes packing for travel more compact. The Companion Travel BCD has two trim weight pockets with Velcro release that carry up to 5 lbs (2.27 kg) each... more
Tags: XSSCTBRG, XS Scuba, Buoyancy Compensators, Essential Equipment, XS Scuba Companion Travel BCD, Black Regular (35" to 45")
|
XS Scuba's Mini Fog-Cutter Knife is one Versatile Divers Tool. The unique design allows the diver to use tool as a Knife with a Straight Edge and a Serrated Edge which can also double as a Sew. It also is equipped with a Line Cutter and its Blunt Tip can be used as a Flat Blade Screwdriver. Release the Handle Latch and you now have a pair of Scissors that can cut most anything. This New for 2012 smaller version of XS Scuba's Fog-Cutter is Compact and Low Profile so it can be mounted in a variety of ways and kept close at hand... more
Tags: XSSMFK, XS Scuba, Knives, Add-On Gear, XS Scuba Mini Fog-Cutter Knife
|
Surface Marker Buoy's (SMB) are now a requirement for all divers. If you don't dive with a SMB you need to start now. It makes sense to be safe. Highland by XS Scuba's SMB is a big 10' (3 meters) tall Buoy for superior visibility on the surface day or night. SMB has a wide 22" (56 cm) circumference giving it 75 lbs (19.43 kg) Surface Lift, so it can double as a great lift bag too! Even with its increased height, circumference and lift it still stows compact in an included 6.5" X 12" (16.5 x 30.5 cm) Mesh Carry Pouch... more
Tags: XSSSMB10OR, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba 10' (3 meters) Surface Marker Buoy Orange
|
Aeris Biojac Jacket Style BCD is manufactured with BioFlex - a unique "living fabric" that stretches, flexes and conforms to the body. BioFlex is an extraordinary fabric, which stretches, fully inflated up to 30% over conventional nylon or polyurethane BC materials. BioFlex eliminates chest squeeze, conforms to the diver's body and provides a slim, body-hugging profile. The Aeris Biojac BCD has a Rolled Neoprene Neck Collar, Torso Adjustment Straps, Adjustable Depth Compensating Cummerbund... more
Tags: PCKABJ, Aeris, Buoyancy Compensators, Essential Equipment, Aeris Biojack BC, Ion AT600 Regulator, A2 Octopus and A300 XT Console with Compass Package
|
Your diving equipment is a major investment, and needs the best care it can receive to give you years of safe and fun diving. One of the worst things you can do once you have finished diving is stowing your equipment in a dive bag in a non-climate controlled environment. Diving equipment is "Life Support Equipment". XS Scuba has developed a series of hangers allowing you to properly dry and stow your equipment in the best possible manner whether it's between dives or for long periods of time XS Scuba has a hanger to do the job. Kit includes a Folding BC Travel Hanger... more
Tags: PCKXSHK, XS Scuba, General Accessories, Assorted Accessories, XS Scuba X5 Hanger Kit
|
Hey ladies! You wouldn't wear a man's suit to the office or a pair of man's shoes to go out dancing, so why would you wear scuba gear designed for male divers? The Bella BCD from SCUBAPRO is ideal for women who love to dive, expect excellence from their dive equipment, and want gear that fits like a dream. The Bella BCD will hug your body and increase your equipment-based comfort like you've never experienced before. Its contoured hip indents will free you from that "digging in" feeling that is so common while wearing BCDs that were designed for men... more
Tags: SCPBL2LG, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro Bella BC with Air 2, Pink/Gray/Black Large
|
Classic Old School power inflator||Attachment to 1in diameter corrugated oral inflation hose||Replacement for Highland Wing||BC QD inflator hose, REV, oral inflator hose are not included... more
Tags: XSSI, XS Scuba, General Accessories, Assorted Accessories, Highland by XS Scuba Inflator
|
The 5 Oceans Back Inflation BCD is a lightweight, weighing 7.5 lbs (3.4 kg), packs flat for travel to the tropics and, at the same time, supplies plenty of lift. The BCC's integrated weight capacity and range of adjustment allows it to be worn in cold water over thick wetsuits or dry suits. The 5 Oceans air cell uses a combination of BioFlex material and bungee cords to maintain the streamline profile, yet allows for 40 lbs (18 kg) of lift. BioFlex - a unique "living fabric" that stretches, flexes and conforms to the body. BioFlex is an extraordinary fabric, which stretches... more
Tags: PCKA5O, Aeris, Buoyancy Compensators, Essential Equipment, Aeris 5 Oceans BC, Ion AT600 Regulator, A2 Octopus, A300 XT Console with Compass Package
|
Looking for a great package deal, the Aeris EX100 Package consists of the following products: The Aeris AERA10 A2 Octopus, simple, yet effective design is ideal divers who demand durability. The bright yellow cover and hose allows quick and easy spotting of the A2 if it's ever needed. Te A2 has a dependable downstream demand valve design. The A2's housing is made from an ABS/Polycarbonate composite blend of materials making the A2 extremely rugged and lightweight, weighing 6 oz (170 g) and nearly neutrally buoyant underwater. The A2 has a small profile with a front diameter of 2.9" (7.4 cm)... more
Tags: PCKAEX1, Aeris, Buoyancy Compensators, Essential Equipment, Aeris EX 100 BC, A2 Regulator and Octopus and A100 Console Package
|
|