This system has filled a void and will offer the "at home" and traveling diver freedom from the weight concerns of handling "back mounted" doubles. Side-mount allows individuals with limited physical abilities and lower back issues to enjoy the redundancy of two tank and two regulators by minimizing the amount of weight on the lower back and lowering the center of gravity for increased stability when entering/exiting the water. Additionally reaching behind your head to shut off or turn on your manifold valve is a thing of the past as both cylinder valves are near your hands... more
Tags: OMSSMS, OMS, General Accessories, Assorted Accessories, OMS Profile Side-Mount System
|
The Nomad Butt-Plate and Bungees Kit allow divers who wish to transform their Existing TransPac Harness and Buoyancy Compensating Wing into a Rig Capable of Side-Mounting Tanks. The Nomad Butt-Plate weaves through Standard 2" (5.1 cm) Harness Webbing on the Waist Strap and is Locked-Tight into Place using Stainless Steel TransPac Assembly Screws through Slots on the Back-Plate. Butt-Plate and Bungees comes Standard with Dive Rite's Ring Bungees and Tank Chokers. When Side-Mounting Stage Tanks or Re-Breather Bailout Bottles... more
Tags: DIV2725, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Nomad Side-Mount Butt-Plate and Bungees Kit
|
Nomad Divers who need to Add Weight to their Rig will want the new Nomad Weight Plate. Carrying up to 16 lbs (7.26 kg) of weight in 4-Separate Pockets, the Nomad Weight Plate attaches to the Back of the Nomad using the Existing Grommets in the Back-Plate. The Pockets will accept both Hard and Soft Weights. Formed in the Shape of the Back-Plate, It Lies Flat and isn't felt by the Diver. The Grommets of the Plate measure at 11.5" (29.2 cm) Center-to-Center, giving an extra 0.5" (1.3 cm) of Spacing as compared to the Grommets of the Nomad Back-Plate... more
Tags: DIV2727, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Nomad Side-Mount Weight Plate
|
Angler Bay Inflatable Boats are designed to give you all the components you need to have a great fishing adventure. There are 2 rod holders, multiple molded drink holders. 4 drain plugs, a battery storage bag and a ditty bag. Boat is lightweight, portable and ideal for lakes and slow moving streams. Equipped with wrap-around grab lines, swiveling oar locks, trolling motor transom mounts and side mounted oar holders. Boat is designed for up to 3 people and is constructed of heavy duty 24-gauge vinyl with electronically welded seams... more
Tags: AHDIBF3, Airhead, Boats Kayaks & Canoes, Watersports, Airhead Angler Bay Inflatable Boat, 3 Person
|
Angler Bay Inflatable Boats are designed to give you all the components you need to have a great fishing adventure. There are 2 rod holders, multiple molded drink holders. 4 drain plugs, a battery storage bag and a ditty bag. Boat is lightweight, portable and ideal for lakes and slow moving streams. Equipped with wrap-around grab lines, swiveling oar locks, trolling motor transom mounts and side mounted oar holders. Boat is designed for up to 4 people and is constructed of heavy duty 30-gauge vinyl with electronically welded seams. The Angler Bay Inflatable Boat is 109" long x 56" wide... more
Tags: AHDIBF4, Airhead, Boats Kayaks & Canoes, Watersports, Airhead Angler Bay Inflatable Boat, 4 Person
|
Angler Bay Inflatable Boats are designed to give you all the components you need to have a great fishing adventure. There are 2 rod holders, multiple molded drink holders. 4 drain plugs, a battery storage bag and a ditty bag. Boat is lightweight, portable and ideal for lakes and slow moving streams. Equipped with wrap-around grab lines, swiveling oar locks, trolling motor transom mounts and side mounted oar holders. Boat is designed for up to 4 people and is constructed of heavy duty 32-gauge vinyl with electronically welded seams. The Angler Bay Inflatable Boat is 140" long x 66... more
Tags: AHDIBF6, Airhead, Boats Kayaks & Canoes, Watersports, Airhead Angler Bay Inflatable Boat, 6 Person
|
If you are setting up Stage Bottles, Need to add D-Rings to your Primary Back or Side mount Systems then the Dive Rite D-Ring Kit is what you are looking for. Kit consists of a 2" (5.1 cm) D-Ring with a 1/4" Diameter, an Adjustable Ring Clamp and a D-Ring Holder. All components are manufactured from Corrosion Resistant 304-Grade Stainless Steel for Durability and Long Life. The Ring Clamp is Easily Adjusted with a Flat-Bladed Screwdriver and can be adjusted to accommodate 7.25" to 8.0" (18.4 to 20.3 cm) Cylinder Diameters. Kit is covered by a 12 month limited warranty.... more
Tags: General Accessories,Div1081p,Assorted Accessories,Dive-Rite D-Ring Kit,Dive-Rite,D-Ring Kit,Dive Rite
|
When Side-Mounting Stage Tanks or Re-Breather Bailout Bottles, Butt-Plate Rails can be difficult to access if Back-Mounted Gear Covers Them-Up. Problem solved with Dive Rite's New Tech Butt-Plate. Its Rectangular Shape places Tank Attachment Points at the Edge of the Diver's Body, while Outrigger Hardware is Easy to Find due to its Orientation Facing Outwards on the Plate. The Butt-Plate is made of Reinforced Nylon to provide the Proper amount of Rigidity to Hold Tanks in Position and Eliminate Sag. Two Stainless Steel Handles are used for Tank Attachment... more
Tags: DIV1030, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Tech Butt-Plate
|
The Dive Rite Primary Cave Reel has 250' (76.2 meters) of Heavy .083" (2.11 mm) #36 DuPont Fiber Braided Line, with 350 lbs (158.76 kg) Breakage Strength and a X-Large Marine Grade Stainless Steel Bolt Snap. The Reel positions the Handle on Top, which helps divers who use a handheld light to hold both the light and the reel in one hand, freeing the other hand to work the reel. The Marine Grade Stainless Steel Frame of the reel comes with a Series of Pre-Drilled Holes so divers can change positions from a Top-Mount Handle to a Side-Mount Handle or a Left-Hand Operated Reel... more
Tags: DIV4310, Dive Rite, Reels, Add-On Gear, Dive-Rite Primary Reel Without Drag 250' #36
|
The FINIS Center Mount Swimmer's Snorkel over the face design allows a swimmer to use goggles while swimming with a snorkel. This design reduces drag and tension otherwise felt with side mount snorkels. Swimmers with neck, back, or shoulder problems can swim with reduced tension on the injured area because they do not have to turn their head to breathe. Allowing the swimmer to keep their face down in the water and concentrate on and watch their stroke is a great way to improve on stroke mechanics. With significant training, proper stroke technique, body position, balance... more
Tags: FNSSSYL, Finis, Snorkels, Essential Equipment, Finis Swimmers Snorkel, Yellow
|
Our new SMS100 Side mount system was designed not just with the side mount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Suitable for side mounting twin or single cylinders, but also for use with rebreathers or rear mounted singles. This system can be used in any environment from open water to the overhead environment.... more
Tags: HLSSMSDLG, Hollis Gear, Buoyancy Compensators, Essential Equipment, Hollis SMS 100 Sidemount System BCD Dual Package Large/X-Large
|
AIRHEAD's Aruba Lounge is a comfortable pool and lake lounge with a mesh panel between pillows at each end. Lie down and stay cool suspended in the water by the comfortable mesh panel. Your drink will be close at hand in the molded drink holder. Tether Aruba Lounge to your boat or tie 2 or more Aruba Lounge's together using the side mounted rope anchors. Durable vinyl construction with RF welded seams. Dimensions: 66" x 37" (167.6 x 94 cm) deflated. The Aruba Lounge is covered by AIRHEADS 90 day limited warranty.... more
Tags: AHDAL, Airhead, Tubes Floats & Lounges, Watersports, Airhead AHAL-1 Aruba Lounge
|
Stay cool floating in a pool or lake, sitting on Fiji Float's comfortable mesh seat. Your drink will be close at hand in the molded drink holder. Tether it to your boat or tie 2 or more Fiji Float's together using the side mounted rope anchors. Durable vinyl construction with RF welded seams and a simple stem valve for inflation. Dimensions: 48" x 43" (122 x 109 cm)deflated. Fijii Float comes with a 3 month limited warranty.... more
Tags: AHDFF, Airhead, Tubes Floats & Lounges, Watersports, Airhead AHFF-1 Fiji Float
|
The stainless steel assembly screws are used for attaching various accessories to a Trans-Pac harness or to a hard back plate (such as lift bag pouches, suit inflation mounting systems and side mount butt plates). Another common use is tosecure the wing to the Trans Pac harness or hard back plate when rigged for a single tank. Designed to fit through a 3/8" hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place, sold as a set of two.... more
Tags: DIV1069P, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Transpac Assembly Screw Pair
|
Greg Flanagan first invented the metal back-plate using aluminum in 1979 for North Florida cave divers. He realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the diver's center of gravity (tanks) being surrounded by the center of buoyancy (BC wings). Plus, the diver gains a clean chest area with room for gear attachment points on the harness. Bill Hogarth Main went on to popularize the back-plate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig... more
Tags: DIV1034, Dive Rite, General Accessories, Assorted Accessories, Dive-Rite Aluminum Back-Plate, Black Anodized
|
|