Looking for a pair of Boots that are designed for the needs of the serious diver? Mares Flea DS 6.5 mm Nylon ll Neoprene Rubber Boots are just what you are looking for. The Flexa DS 6.5 mm Boots have an exclusive design of the sole that features a System of Drainage Grooves (DS) Draining System, which prevent the Suction Effect between Boot and Fin Foot Pocket which is common in other Dive Boots. This unique feature makes Donning and Doffing of Fins to becomes Much Easier... more
Tags: MRSBF610, Mares, Boots, Exposure Protection, Mares Flexa DS 6.5 mm Dive Boot 10
Also available in:
11 | 5 | 6 | 7 | 8 | 9
|
Following the Trilastic system concept, Mares created the most comfortable boots, engineered to allow the highest control and power transmission during fining action. The boot material differs depending on the area of concern. The ankle incorporates a super-elastic neoprene rubber for flexibility allowing free movement for less fatigue. The lower section uses standard neoprene rubber to ensure warmth.The boot is equipped with an YKK zipper with an internal neoprene seal to reduce water exchange adding additional warmth. Trilastic Boots are built tough with a reinforced toe and heel... more
Tags: MRSBTR10, Mares, Boots, Exposure Protection, Mares Trilastic 5mm Dive Boots 10
|
Mares, has always paid special attention and devotee's its self to ergonomic design. The material used, is highly shock resistant elastomer to protect the gauges accuracy, and affords a secure grip in every situation with any type of glove. The Compact Pressure Gauge has a florescent dial for easy reading in day or night diving situations. Face of Pressure gauge is color coded for safe air reserve in a glance.Pressure Gauge has 0 to 5,000 psi readout with a safety reserve 500 psi color coded in red to allow the diver to know that they are low on air... more
Tags: MRSM1PG, Mares, Gauges, Essential Equipment, Mares Mission 1 Compact Pressure Gauge, Imperial
|
Mares Mission 3 Analog console is equipped with a pressure gauge, depth gauges, and is completed with a compact compass. Console is optimally angled in a shock resistant case for easy reading of gauges and compass at the same time. Pressure Gauge has 0 to 5,000 psi readout with a safety reserve 500 psi color coded in red to allow the diver to know that they are low on air. The impact-resistant boot has multiple eyelets for attachment of a clip or lanyard to keep the gauge close at hand and from dragging over the environment... more
Tags: MRSM3, Mares, Gauges, Essential Equipment, Mares Mission 3 Gauge Console (Imperial)
|
Mares Mission Puck 2 Console consisting of the Puck Computer Capsule and a Compact Easy-to-Read Pressure Gauge with a Chrome-Plated Brass Body. The Shock Resistant Elastomeric Techno Polymer Console Boot has been designed with Optimized Angles and Shape for Maximum Ergonomics. The Central Loop Hook, added to the Side and Frontal Soft Eyelets, allows Flexible Attachment to your gear. The Mission Puck 2 Computer Console uses Mares-Wienke RGBM (Reduced Gradient Bubbles Model) algorithm. The RGBM takes into account the phenomenon of micro-bubbles in order to prevent their formation. In over 10... more
Tags: MRSMP2CC, Mares, Computers, Essential Equipment, Mares Mission Puck 2 Computer Console
|
Mares Mission Puck 3 Console consisting of the Puck Computer Capsule and a Compact Easy-to-Read Pressure Gauge with a Chrome-Plated Brass Body and is completed with a compact compass. The Shock Resistant Elastomeric Techno Polymer Console Boot has been designed with Optimized Angles and Shape for Maximum Ergonomics. The Central Loop Hook, added to the Side and Frontal Soft Eyelets, allows Flexible Attachment to your gear. The Mission Puck 3 Computer Console uses Mares-Wienke RGBM (Reduced Gradient Bubbles Model) algorithm... more
Tags: MRSMP3CC, Mares, Computers, Essential Equipment, Mares Mission Puck 3 Computer Console
|
|