Highland by XS Scuba Mini Tech Pressure Gauge is a great gauge for Technical Diving, Deep Diving and Overhead Environment Diving activities. Gauge is small and compact measuring only 1.1" (2.8 cm) in Diameter, .88" (2.2 cm) Thick and can be mounted directly into a High Pressure (HP) Port of a First Stage Regulator or on the end of a High Pressure Hose. Gauge is especially advantageous when used with Stage Bottles, Decompression and Safety Stop Bottles where a full size Pressure Gauge is not necessary... more
Tags: XSSMTG, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Mini Tech Pressure Gauge
|
Highland by XS Scuba Mini Tech Pressure Gauge is a great gauge for Technical Diving, Deep Diving and Overhead Environment Diving activities. Gauge is small and compact measuring only 2.8 cm (1.1") in Diameter, 2.2 cm (.88") Thick and can be mounted directly into a High Pressure (HP) Port of a First Stage Regulator or on the end of a High Pressure Hose. Gauge is especially advantageous when used with Stage Bottles, Decompression and Safety Stop Bottles where a full size Pressure Gauge is not necessary... more
Tags: XSSMTGM, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Mini Tech Pressure Gauge, Metric
|
This Handy Adapter allows you to attach a Mini Tech Gauge by XS Scuba (SKU's: XSSMTG and XSSMTGM) to the end of a High Pressure Hose. Inline Gauge Adapter is a great item for a Low Cost, Low Profile Pressure Gauge for Stage Bottles or Redundant Air Supply set ups. Adapter allows Inline (180°) connection with the HP Hose. Inline Adapter is made from Chrome Plated Brass for Durability and Long Life. Inline Adapter comes equipped with an Air-Spool with Viton O-rings so it's Nitrox Compatible.... more
Tags: XSSIGA, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Inline Gauge Adapter
|
This Handy Adapter allows you to attach a Mini Tech Gauge by XS Scuba (SKU's: XSSMTG and XSSMTGM) to the end of a High Pressure Hose. 90° Gauge Adapter is a great item for a Low Cost, Low Profile Pressure Gauge for Stage Bottles or Redundant Air Supply set ups. Adapter allows Right Angle (90°) connection with the HP Hose. 90° Adapter is made from Chrome Plated Brass for Durability and Long Life. 90° Adapter comes equipped with an Air-Spool with Viton O-rings so it's Nitrox Compatible.... more
Tags: XSSNDGA, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba 90 Degree Gauge Adapter
|
Keeping warm when diving can be one of the most difficult things to do. If you wear a dry suit you can remain warmer for longer periods of time then if you wear a wet suit, but even a dry suit can allow you to have heat loss. One way to increase the retention of body heat in a dry suit is to use argon gas to fill it rather than air or nitrox. Argon is a great insulator, being heavier then air or nitrox argon will keep you warmer longer. XS Scuba's Highland Dry Suit Inflation Kit can increase your bottom time by keeping your breathing gas for just that... more
Tags: XSSDSIK, XS Scuba, Tanks, Essential Equipment, Highland by XS Scuba Dry Suit Inflation Kit
|
Studies have been performed showing a significant improvement in dry suit thermal protection can be achieved when using argon instead of air as a dry suit inflation gas. Overall, the total suit insulation increased by approximately 20%. If you Dive a Dry Suit and want to be warmer longer than you should be using an Argon Regulator System. Highland by XS Scuba's Argon Regulator is a complete regulator system set up specifically for use with Argon Gas. The First Stage is a Non-Balanced, Reliable and Simple Flow-By Fail Safe Piston Design that is factory set at 115 to 125 psi (7.9 to 8... more
Tags: XSSCARB, Highland Millworks, Regulators, Essential Equipment, Highland by XS Scuba Complete Argon Regulator Metric Gauge
|
|