800.637.6880
212.645.1234
|
Highland by Scuba Delrin Regulator Cap |
|
Related Categories:
highland by xs scuba delrin speed nuts
|
Regulator Cap Scuba Dive Accessories
|
Regulator Cap
|
Highland by Scuba Silicone Regulator Necklace
|
Highland Millworks Scuba Dive Regulator
|
Din Female Regulator Cap
|
Highland by Scuba Thin Line
|
highland by scuba single tank adapter
|
Keeping your regulator protected from the elements when it is not connected to a cylinder is important to your safety and the reliability of your Life Support System. Protect your regulator from water, dirt, dust and crawling critters. This non-corrosive Delrin Plastic DIN Protector Cap is the best kind to ensure proper protection. It threads in place to protect your regulator from having water enter inside the delicate internal mechanism when washing your gear after diving. Cap comes equipped with a nylon cord for attachment to your regulator, so it's always ready to be put in place... more
Tags: XSSDDC, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Delrin DIN Regulator Cap
|
Studies have been performed showing a significant improvement in dry suit thermal protection can be achieved when using argon instead of air as a dry suit inflation gas. Overall, the total suit insulation increased by approximately 20%. If you Dive a Dry Suit and want to be warmer longer than you should be using an Argon Regulator System. Highland by XS Scuba's Argon Regulator is a complete regulator system set up specifically for use with Argon Gas. The First Stage is a Non-Balanced, Reliable and Simple Flow-By Fail Safe Piston Design that is factory set at 115 to 125 psi (7.9 to 8... more
Tags: XSSCARB, Highland Millworks, Regulators, Essential Equipment, Highland by XS Scuba Complete Argon Regulator Metric Gauge
|
The Highland by XS Scuba Compact DIN First Stage is a Non-Balanced, Reliable and Simple Flow-By Fail Safe Piston Design that is factory set at 135 to 145 psi (9.3 to 10 bars) intermediate at 3000 psi (200 bars) cylinder pressure. The Compact Low Profile First Stage is manufactured from Durable Marine Grade Brass with a Chrome Finish has one High Pressure Port and two Low Pressure Ports. Regulator comes equipped with a 200/300 bar (3000/4350 psi) DIN Connection which can be quickly converted to a Yoke Style First Stage with the addition of an Optional Spin-On Yoke Adapter... more
Tags: XSSCDF, Highland Millworks, Regulators, Essential Equipment, Highland by XS Scuba Compact DIN First Stage
|
Keeping warm when diving can be one of the most difficult things to do. If you wear a dry suit you can remain warmer for longer periods of time then if you wear a wet suit, but even a dry suit can allow you to have heat loss. One way to increase the retention of body heat in a dry suit is to use argon gas to fill it rather than air or nitrox. Argon is a great insulator, being heavier then air or nitrox argon will keep you warmer longer. XS Scuba's Highland Dry Suit Inflation Kit can increase your bottom time by keeping your breathing gas for just that... more
Tags: XSSDSIK, XS Scuba, Tanks, Essential Equipment, Highland by XS Scuba Dry Suit Inflation Kit
|
DIN Valves need special protection to keep water or debris from entering the valve opening when the regulator is not threaded to the valve. XS Scuba's Double 316 Grade Stainless Steel DIN Plugs are precision machined to protect your DIN Valve Double Outlet Cylinder System the way they need to be protected. Oxygen cleaned and equipped with Viton O-rings for a complete seal of your DIN Manifold Valve from the elements and contaminations, the XS Scuba Stainless Steel DIN Plugs should be your only choice. Plugs won't get separated with the Coated Stainless Steel Connecting Cable... more
Tags: XSSDSDP, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Double SS DIN Plugs Plug with Double DIN Cap
|
|
|
|
|