The arm system allows easy strobe placement from macro close-up to wide angle without changing aim of the Sensor. The complete system removes with a push of the handle button. Two clamps allow multiple light positioning options and extreme versatility for aiming your strobe.... more
Tags: Photography,Ikelite,Ikelite Ball and Socket,Ik408661,Ikelite Ball & Socket Arm System with 1.00" Ball - for Digital Ds-50, Ds-125 Substrobes,Digital Ds-50,Add-on Gear
|
9577.41 Ball with mount for SubStrobe 50, 50s, M, MV and MS series strobes. Thisball can also be used with #4073 Lite Bracket "M" to attach a Mini-C Lite.... more
Tags: IK957741, Ikelite, Photography, Add-On Gear, Ikelite Substrobe 50 & DS-125 Mount Ball
|
The Manual EV-Controller is a manual exposure controller that provides 10 manualpower settings in half-stop increments for maximum versatility and control of the flash exposure. The EV-Controller is designed to work with SubStrobe DS-50, 51, 80, 125, 160 and DS-200 models. The Manual Controller has a slave sensor allowing it to be triggered by another strobe; or any of our sync cords can be attached to the Controller bulkhead... more
Tags: Photography,Ikelite,Ikelite Manual Strobe Controller for Ds Digital Series Substrobes,Ikelite Manual Strobe,Manual Strobe Controller,Strobe Controller for Ds Digital Series Substrobes,Ik41006,Add-on Gear
|
This sync cord can be used as you would normally use the #4103 sync cord, but isa must in order to achieve TTL with the Ikelite TTL Digital Housings to maintainthe Olympus TTL signal to an Ikelite Substrobe DS-50 or DS-125. Sync Cord is a coiled cord type, has five conductors, bulkheads are nickel plated brass, and a built-in strain relief. This cord will also work with TTL film cameras. Cord comes with protective cap. Cap is machined from black Delrin, apply almost no squeeze to the "O" ring, and allow connector attachment on both ends of the sync cord.... more
Tags: Photography,Ikelite Ttl Flash Sync Cord for the Underwater Digital Ttl Camera Housings,Ikelite,One Non-Ttl Substrobe,Ikelite Cord,Ik41043,Sync Cord,Add-on Gear
|
This sync cord is a must in order to achieve TTL with the Ikelite TTL Digital Housing to maintain the TTL signal to an Ikelite Substrobe DS-50 or DS-125. It can connect 2 strobes to the housing. Sync Cord is a coiled cord type, has five conductors, bulkheads are nickel plated brass, and a built-in strain relief. This cord will also work with TTL film cameras. Cord comes with protective cap. Cap is machined from black Delrin, apply almost no squeeze to the "O" ring, and allow connector attachment on both ends of the sync cord.... more
Tags: Photography,Ikelite,Ik410352,One Non-Ttl Substrobe,Ikelite Cord,Ikelite Ttl Dual Flash Sync Cord for the Underwater Ttl Digital Camera Housings.,Sync Cord,Add-on Gear
|
|