You just set up your equipment for the first dive of your vacation in Saint Somewhere, as you press the activation button on your dive computer it goes through the diagnostic screen and what do you see the "Low Batt" Icon appears. The worst thing that can happen on a tropical vacation has just happen No Dive Computer. Don't leave on a vacation without spare batteries, why ruin a great holiday because of a few dollars in batteries. Kit works with Aeris Atmos 1, 2, Ai and Elite Dive Computers. Included with the kit is a 3.0 Volt Lithium CR2450 Battery, Battery Hatch O-Ring... more
Tags: AERBK, Aeris, General Accessories, Assorted Accessories, Aeris Atmos 1, 2, AI, and Elite Battery Kit
|
You are fully suited up and are ready to put your fins on to start your dive and your Mako fin strap or buckle breaks! Don't be left on the shore watching your dive buddies sink below the blue without you, always have a spare strap in your Save-a-Dive kit! Basic fin strap and buckle is designed for Aeris Mako fins, but will fit a large scope of strapped fins. Fin strap has a durable, impact resistant plastic squeeze-style quick disconnect release for easy donning or removal of fin.... more
Tags: AERFSBM, Aeris, General Accessories, Assorted Accessories, Aeris Fin Strap with Buckle for Mako Fins
|
Vision Problems?... Tired of not being able to see well underwater? Can't read your computer or gauges? Maybe you not sure what F-Stop you are setting your camera on? If these are problems for you when diving, you need to get a set of Diopter lenses for your dive mask. Just as eyeglasses are the easiest and safest way to correct vision topside, a corrective lens is the simplest and most cost effective way for correcting your vision underwater. If you need corrective lenses for your Europa Series 2 windowed mask, it can be easily fitted with optical lenses from -1.5 to -8.0 Diopters in 0... more
Tags: AERMLE30, Aeris, General Accessories, Assorted Accessories, Aeris Corrective Lenses Negative Diopters for Europa 2, Europa 2 with Purge and Europa 4 Masks (single lens not a pair) -3.0
|
Don't always need your compass for navigation; this convenient hose mount compass module is your best choice. Allows diver to choose when navigation is required by using a durable rubber boot with threaded adapter that clamps quickly and easily to any high pressure hose. Boot has side scan notch for side-reading gun-sight accurate navigation.... more
Tags: OCNVTCH, Aeris, General Accessories, Assorted Accessories, Compass Hose Mount Assembly for Oceanic VT Pro/VT3 and Aeris Atmos Elite/Elite T3 Wrist Computers
|
You are fully suited up and are ready to put your fins on to start your dive and your fin strap or buckle breaks! Always have a spare in your save-a-dive kit. Basic fin strap and buckle is designed for Aeris fins yet, will fit a large scope of strapped fins. Fin strap has durable impact resistant plastic squeeze" style quick disconnect release for easy donning or removal of fin. This simple easy grip rubber strap with buckle could save a dive!... more
Tags: General Accessories,Aeris Fin Strap,Aeris Fin Strap with Buckle,Fin Strap,Assorted Accessories,Aeris Fin,Aeris,Fin Strap with Buckle
|
Your dive computer is an expensive and important piece of equipment. Maintain your dive computer's display with this gauge protector from Aeris. This gauge protector is designed to protect your dive gauge from scratches, abrasions and harmful U.V. rays. Its protective lens is optically clear and easily installs onto the gauge display, and if the protector gets scratched, it is easy to remove and leaves no marks or residue behind.... more
Tags: Gp003,Gauge Protector for Aeris Xr1 and Xr2 Computers,General Accessories,Assorted Accessories,Gauge Protector Aeris Xr2,Aeris,Gauge Protector Aeris Xr1
|
Must be used with the retractor kit for the VT Pro Get rid of the wrist mount, heck it only gets in the way when you are donning your cylinder, or when you are trying to hand up your Scuba System to a deck hand. So get rid of that wrist mount and switch to this convenient bracket/retractor system. Bracket comes completely ready to mount on to the VT Pro Retractor Kit SKU: OCNRVT Computer Retractor Mount (fits Oceanic VT Pro, VT3 & Aeris Atmos Elite Computers). Make's using your computer and compass easy and convenient. Just pull the bracket/retractor to desired length for readings... more
Tags: General Accessories,Aeris Atmos Elite Computer,Compas& Aeris Atmos Elite Computer,Compass,Assorted Accessories,Aeris,Compass Assembly,Compass Assembly Kit for the Oceanic Vt Pro, Vt3, Aeris Atmos Elite and Elite T3 Computers,Oceanic Vt Pro
|
Must be used with the retractor kit for the VT Pro Get rid of the wrist mount, heck it only gets in the way when you are donning your cylinder, or when you are trying to hand up your Scuba System to a deck hand. So get rid of that wrist mount and switch to this convenient bracket/retractor system. Bracket comes completely ready to mount on to the VT Pro Retractor Kit SKU: OCNRVT Computer Retractor Mount (fits Oceanic VT Pro, VT3& Aeris Atmos Elite Computers). Make's using your computer and compass easy and convenient. Just pull the bracket/retractor to desired length for readings... more
Tags: General Accessories,Aeris Atmos Elite Computer,Compass Bracket for Oceanic Vt Pro, Vt3 & Aeris Atmos Elite Computer,Oceanic Vt Pro and Aeris Atmos Elite Computer,Assorted Accessories,Aeris,Compass Bracket,Compass Bracket for Oceanic Vt
|
Your dive computer is an expensive and important piece of equipment. Maintain the display of your dive computer or watch with this gauge protector from Aeris. This gauge protector is designed to protect the display of the Aeris Manta Dive Watch (SKU: AERMN) and the Aeris F.10 Free Diving Computer Watch (SKU: AERF1) from scratches, abrasions and harmful U.V. rays. The protective lens is optically clear and easily installs onto the display. If the protector gets scratched, it is simple to remove and leaves no marks or residue behind.... more
Tags: AQUGP004, Aeris, General Accessories, Assorted Accessories, Gauge Protector for the Manta Dive Watch & F.10 Free Diving Computer Watch
|
Tired of having to submerge your Computer in water so you can see through the gauge protector? Once your gauge protector gets scuffed and scratched enough you can hardy read it on the surface between dives, it still protects the Computer crystal, but if you can't read the gauge between dives it time to replace it. The Gauge Protector is designed to protect your dive gauge from scratches, abrasions and harmful U.V. rays. Its protective lens is optically clear and easily installs over any gauge.... more
Tags: Oceanic Gauge Protector,General Accessories,Gauge Protector for Aeris Atmos Elite/Atmos 1 & 2, Oceanic Versa/Versa Pro/Vt Pro,Gp001,Assorted Accessories,Aeris Gauge Protector,Aeris,Gauge Protector
|
|