Roll Control System is the Complete Accessory System for Diving, Fishing and Boating it starts with a Track System that enables you to mount either and Aluminum, PVC or Molded Plastic Track to your boat gunnels, vans, and truck beds or personnel watercraft. Once you have the basic track you can then mount any of the many brackets available to hold Scuba Cylinders, Fishing Rods, Rope Cleats and much more. This white PVC accessory mount allows non-roll control products (such as bench cushions, boxes, mirrors and other boat accessories) to be used with the aluminum or molded track... more
Tags: General Accessories,Roll-Control Accessory Mount,Roll Control,Ta-87,Accessory Mount,Roll-Control,Roll-Control Accessory Mount (Ta-87),Assorted Accessories,Roll-Control Ta-87
|
You have a XS Scuba Pressure Gauge (SKU's: XSSPG or XSSPGM) and Wrist Depth Gauge (SKU's: XSSWDG or XSSWDGM) and want to combine them in a Console Boot. XS Scuba's Combo Console Boot can achieve this goal along with allowing you to even add a Compass if you want to! Made from Noncorrosive Thermoplastic for Long Life, Impact Resistance and Durability this Console Boot has a Sleek Low Profile with Attachment Points on both sides for a Lanyard or Clip... more
Tags: XSSCCB, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Combo Console Boot, Black
|
You have a XS Scuba Pressure Gauge (SKU's: XSSPG or XSSPGM), Wrist Depth Gauge (SKU's: XSSWDG or XSSWDGM) and Bungee Mount Compass (SKU: XSSBMC) and want to combine them in a Console Boot. XS Scuba's Navigator Console Boot can achieve this goal. Made from Noncorrosive Thermoplastic for Long Life, Impact Resistance and Durability this Console Boot is Attachment Clip Ready. Both the Depth and Compass Mount on the Front of the Boot and on the back side of the Boot there's a place for the Pressure Gauge... more
Tags: XSSNCB, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Navigator Console Boot
|
You prefer to wear your Dive Knife on your leg, but find that unless you're diving a 5 mm or thicker wet suit the hard plastic sheath and straps hurts your leg. XS Scuba's Neoprene Knife Wrap is an alternative way to wear your knife on your leg with Added Comfort. Even when not wearing an Exposure Suit or wearing a Shorty this Neoprene Knife Wrap Adds Comfort. Knife Wrap is made from Soft, but Durable Nylon II Neoprene Rubber with a Slip-Resistant Backing for added Security. Adjustable Velcro Straps for Mounting to your lower leg are more comfortable then straps with hard plastic buckles... more
Tags: XSSNKW, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Neoprene Knife Wrap
|
Do you have a XS Scuba's Combo Console or Instrument Console that has a Mount for a Small Round Writing Slate on the back side of the Boot? If you need a new or spare Communication Slate for your Console Boot this XS Scuba Round Replacement Slate for Combo Console Boot is what you are looking for. Slate is made from a White Plastic, is easy to install and can help you with Logging Critical Dive Information, Communicating with your Buddy or writing down Interesting Information about the Dive Environment. A Standard Pencil can be used to write on Slate and can be easily erased for re-use.... more
Tags: XSSRRS, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Replacement Round Slate for Combo Console Boot
|
Roll Control System is the Complete Accessory System for Diving, Fishing and Boating it starts with a Track System that enables you to mount either and Aluminum, PVC or Molded Plastic Track to your boat gunnels, vans, and truck bedsor personnel watercraft. Once you have the basic track you can then mount any ofthe many brackets available to hold Scuba Cylinders, Fishing Rods, Rope Cleats and much more. The solid PVC adjustable-angle mounting kit allows you to mount aluminum track to curved surfaces. The kit includes the stainless steel hardware that is required to mount a single track... more
Tags: Ta-84,Mounting Kit,Roll-Control Mounting Kit (Ta-84),General Accessories,Roll Control,Roll-Control,Assorted Accessories,Roll-Control Ta-84
|
Roll Control System is the Complete Accessory System for Diving, Fishing and Boating it starts with a Track System that enables you to mount either and Aluminum, PVC or Molded Plastic Track to your boat gunnels, vans, and truck bedsor personnel watercraft. Once you have the basic track you can then mount any ofthe many brackets available to hold Scuba Cylinders, Fishing Rods, Rope Cleats, Beverage Holders and much more. This molded polypropylene beverage holder slides into aluminum or molded track and then swings freely to prevent spills. It can hold cans, mugs... more
Tags: General Accessories,Roll-Control Track Mount Beverage Holder (Ta-91),Roll Control,Roll-Control Beverage Holder,Roll-Control,Roll-Control Ta-91,Assorted Accessories,Ta-91
|
Highland by XS Scuba's Stainless Steel Back-Plate is made from Durable and Corrosion Resistant 11 Gauge (.115"/2.92 mm) 316 Grade Stainless Steel. Back-Plate weighs in at 5 lbs (2.27 kg) and is Laser Cut for Dimensional Accuracy. To Protect the Harness Webbing, the Stainless Steel Back-Plate has CNC-Machined Beveled Edges and a final "Polished Finish" by Hand for Smooth Slots and Holes. Back-Plate has Angled and Horizontal Slots for "Straight" or "Cross-Over" Shoulder Strap Configurations, Mounting Holes at 11" (27... more
Tags: XSSSSB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Steel Back-Plate
|
The Ultimate Scuba Tank Holding Systems Finally, the No hassle, No headache SCUBA tank holder that comes pre-assembled with an instant attach and release system. Max Holding Systems offers the newest form of scuba tank holders by using an effortless, temporary SCUBA tank mounting system. Max avoids the unnecessary damages caused from permanent tank mounting systems used today. made out of white powder coated aluminum track, durable polypropylene brackets, heavy duty permanent suction cups, sturdy weather resistant plastic handles with easy to release latches... more
Tags: The Ultimate Scuba Tank Holder by Max Holding Systems 2 Tanks,The Ultimate Scuba Tank Holder,Tank Holder,General Accessories,Assorted Accessories,The Ultimate Scuba Tank,Max Holding Systems,Scuba Tank Holder
|
Protect your trailer hitch from the elements and accidental damage with handsomeChrome Dive Flag Hitch Cover. It also lets the world know you're a Scuba Diver and proud of it. This Hitch cover is great as a gift for your diving significant other or friend. Dive Flag Hitch Cover comes in Chrome or Black Mount versions.... more
Tags: AQUAHBR, Aqua, General Accessories, Assorted Accessories, Dive Flag Metal Hitch Covers Brushed Chrome
|
The new SEASOFT QUIKPAK Diving Vest is designed to hold a 13 or 19 Cu. Ft. tank without an air cell or buoyancy system. This diving vest holds only enough weight to make you neutrally buoyant. This allows the diver to dive in very shallow water in situations requiring quick entry and/or a limited air supply. Some of the applications are search and rescue, shallow water recovery, research, boat maintenance, cutting a prop loose that has become entangled, or any other shallow water applications. The SEASOFT QUIKPAK Diving Vest can hold up to 20 lbs. of soft weights... more
Tags: Quikpak Diving Vest,General Accessories,Seasoft,Diving Vest,Seasoft Quikpak Diving Vest,Assorted Accessories,Seasoft Diving Vest
|
Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB7, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 7.25" 2.5" WIDTH
|
Surface Marker Buoy's (SMB) are now a requirement for all divers. If you don't dive with a SMB you need to start now. It makes sense to be safe. Highland by XS Scuba's SMB is a big 10' (3 meters) tall Buoy for superior visibility on the surface day or night. SMB has a wide 22" (56 cm) circumference giving it 75 lbs (19.43 kg) Surface Lift, so it can double as a great lift bag too! Even with its increased height, circumference and lift it still stows compact in an included 6.5" X 12" (16.5 x 30.5 cm) Mesh Carry Pouch... more
Tags: XSSSMB10OR, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba 10' (3 meters) Surface Marker Buoy Orange
|
|