800.637.6880
212.645.1234
|
|
Hollis 5lb Non Ditchable Optional Pockets Pair
5
See More Similar
Scuba Weights and Belts »
|
|
Hollis 5lb Non Ditchable Optional Pockets Pair
|
List Price:
|
$29.95
|
|
Our Price:
|
$24.95
|
|
You Save:
|
$5.00 (17%)
|
SKU:
HLSHSNDW
In Stock
|
|
|
Questions about this item:
Shopper The 24.95$ is for the PAIR or for each unit?...just to make sure.
Thx
KENTON P They come at that price as a pair
BEN P 24.95 is for the pair
BRYAN T They are great low profile weight pockets. They open and close easley and are very well built. Highly recommend them. I have a set on all 3 of my sets of gear.
Marilyn S This is a PAIR of pockets. :)
Harry O I want to use them for freediving, are they the best choice? I will have them filled with multiple home made 1 lb shot filled bags. I am thinking that with the zipper closure that it would keep the shot bags from falling out.
FRANK R Yes Harry, I think you will be fine. I purchased it because I need it for my sidemounted bc and it works perfectly. Best of luck. Frank
I
SCOTT B 1. I have no clue what the best choice for your use is. I am not familiar with the entire product line offered by LeisurePro, let alone if a better choice exists elsewhere. Ultimately, that is a question that only you can answer. But, it may be helpful to contact the sales people who are more familiar with the full LeisurePro catalog.
2. Yes, the zipper holds the weight in, that's the point.
L W The description says it uses a patented quick release system, but the label on the pouch says 'non dumpable weight pouch', so which is it?
Also, what is thickness of the fabric, in deniers, perferably.
KIMBERLY F This can be a ditchable or non-ditachable weight pocket, depending on how your position it on your harness.
If you position it with the zipper facing up, then it's non-ditchable. If you position it with the zipper facing down, then it is ditchable.
I have a pair of these and use them as accessory pockets, thus the zipper is facing up on my harness.
Frank L Yes, this is an error on the website. They are non-ditchable. No quick release.
RICHARD D This is not a dump-able a weight. I don't know the thickness, but it is a well built pouch I've been using on the back of my Zeagle tech for a year now.
JG S Fits on 2 in webbing. I placed on tank cam bands to trim but could be used on cummerbund 2 in as well. Very well made, heavy duty. Zippered and clean design. . NOT DITCHABLE unless you mount it w/in reach and unzip (hence position zipper to the down side). So even though you could in theory open the pockets, I cannot recommend as "quick release". Owned many top brands, and Hollis produces solid equipment, as does XS and others.
ANDREW B These are non ditchable. It has a zippered top making it east to load and secure, but there is no easy way to ditch the weight. I am using them for weight trim on my tank band. Not sure about the measurement of thickness. They are adequate. You can also look them up on the hollis website.
BH K Hello, Can I attach these pockets to 2" tank strap for the use of trim weight pouches?
and I also would like to know the size of these pockets.
PAVEL V Yep, they can be attached to 2" webbing and tank strap. I've attached mine on lower tank strap. Each pocket can easly accept 2kg weigths (or 4lbs)
SCOTT B You can attach them to any 2" webbing. There is no snap or anything, so you would have to unthread the tank strap, and thread these on. Regarding size, think a 5lb solid weight. I don't know exact dimensions, but they are pretty much the same size (perhaps slightly larger) than a 5lb block weight.
5lbs.capacity each pocket/10lbs. total Stainless grommets for backplate attachment Models available for use with all Hollis harnesses
- Integrated Weight System for the HTS or ATS Harness System
| Weight [with packaging] | 0.25 lb |
12/18/2012 5.0I would buy this product again and again By cmejlbo from Westminster,CA
|
|
Related products for Hollis 5lb Non Ditchable Optional Pockets Pair
|
When adding weights to your gear, either on a tank strap, weight belt or weight harness, this is the cleanest, easiest way to go. SEASOFT Trim Pockets hold up to 5 lb. each with drain holes in the bottom and a huge VELCRO flap to keep the weights in place. The back of the SEASOFT Trim Pockets are designed to either be mounted directly onto 2" webbing with a webbed loop or a fold over VELCRO flap that folds over itself for a secure fit. Sold in pairs.... more
Tags: SSTTP, Seasoft, Weights & Belts, Essential Equipment, SeaSoft Trim Pocket Pair
|
Omer Sub's Interchangeable Foot Pockets were designed and developed by Omer's Technicians using the Newest Compression Molding Technology that exists today. The Internal Geometry of the Foot Pocket has been Ergonomically Designed using Beta Tools which are used in the production of Safety Shoes, to Fit-with-Total Comfort. The Foot Pocket is produced from Natural Rubber Compounds with two- different Stiffness. These Compounds are used throughout the different sections of the pocket to Maximize-the-Efficiency of the Stroke without Compromising Comfort... more
Tags: OSBFC4FP39, Omer, General Accessories, Assorted Accessories, Omer C4 Mustang Foot Pocket Pair 39-40 39-40
|
Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, maybe you would like to relieve your hips from all that weight from your weight belt or you're looking for a simple weight pocket for string on your Harness Waist Strap or Weight Belt? Whatever you need to get more stability or comfort in diving from the lead weight these Scubapro X-Tek Counter Weight Pockets are what you're looking for. Pocket easily attaches by sliding over the end of any 2" (5.1 cm) cylinder band... more
Tags: SCPXTCWP, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Counter Weight Pockets, Pair
|
OMS Compact Quick Dump Weight Pocket System, this integrated weight system consists of (2) matching pockets, incorporates No Sag features, an inner pouch that holds the weight and is secured by a 2" Quick Release buckle to prevent accidental dumping of weights.The Weight Pocket holds up to 15 lbs. Measures 9"L x 5.25"H and is made from rugged 1600 denier Nylon.... more
Tags: OMSCQDWP, OMS, General Accessories, Assorted Accessories, OMS Compact Quick Dump Weight Pocket (Pair)
|
If you have a Scubapro X-Tek Buoyancy Compensator System or a Tec Harness with 2" (5.1 cm) webbing and want to add Weight Integration the removable Buckle Weight Pocket System is designed to be used with the 2" (5.1 cm) waist webbing of the X-Tek Back-Plate or other Tec System. Weight Pockets are easy to install and are manufactured with durable Nylon Material with Impact Resistant Quick Release Weight Buckles and Metal Attachment Rings and Hardware. Pockets come equipped with Metal D-Rings for attachment of accessories. Weight Pockets are designed to carry approximately 10 to 12 lbs (4... more
Tags: SCPWPQR, Scubapro, General Accessories, Assorted Accessories, Scubapro Accessory Quick Release Weight Pockets, Pair
|
The SEASOFT QUIK DITCH pockets can be mounted on any 2 webbing. They are secured with 2 weight keepers or slides attached to the pocket. Grommet holes on the pocket allow you to easily attach some of the most popular knives on the market. Pockets ditch from the bottom and are filled from the top.Each pocket will hold up to 15 lbs. of weight If you need pockets for your BC,nothing beats the QUIK DITCH!... more
Tags: SSTQDP, Seasoft, Weights & Belts, Essential Equipment, Seasoft Quick Ditch Pockets (Pair)
|
When you need to add an accessory pocket to your gear, mount a knife with the two built-in grommets, (knife not included) take an extra light with you, even hold non-ditchable lead or a frameless mask or just about anything else? The SEASOFT Accessory Pocket features a big, useful pocket (7" long, 5" high, with a depth of 3"), a big #10 zipper, a large stainless steel D-ring, the two knife grommet holes, and slots on the back to mount onto 2" webbing. So much versatility and potential, the SEASOFT Accessory Pocket is a great accessory.... more
Tags: SSTAP, Seasoft, General Accessories, Assorted Accessories, Seasoft Accessory Pocket
|
With the Bulletproof Design of the Hollis HP5 Non-Balanced Flow-By Piston First Stage the 210/H-O2 Tech Regulator is Certified for up to 100% Oxygen Service thanks to Highly Specialized Component Materials and Manufacturing Processes. Cleaned and Assembled in a Clean Room Environment with Specially Designed Materials, Halocarbon Based Lubricants and Color-Coded for Easy Identification. The Hollis 210/H-O2's First Stage Regulator comes with a 300 BAR/4500 PSI DIN Connection. The DIN Hand-Wheel Connector comes in Oxygen Green for Easy Identification for Oxygen-Use-Only... more
Tags: HLSO2210, Hollis Gear, Regulators, Essential Equipment, Hollis 210/H-02 Oxygen Regulator, DIN
|
With the Bulletproof Design of the Hollis HP5 Non-Balanced Flow-By Piston First Stage the H-O2 Tech Regulator is Certified for up to 100% Oxygen Service thanks to Highly Specialized Component Materials and Manufacturing Processes. Cleaned and Assembled in a Clean Room Environment with Specially Designed Materials, Halocarbon Based Lubricants and Color-Coded for Easy Identification. The H-O2 First Stage Regulator comes with a 300 BAR/4500 PSI DIN Connection. The DIN Hand-Wheel Connector comes in Oxygen Green for Easy Identification for Oxygen-Use-Only... more
Tags: HLSFSH02D, Hollis Gear, Regulators, Essential Equipment, Hollis H-02 First Stage Only Din
|
With the Bulletproof Design of the Hollis HP5 Non-Balanced Flow-By Piston First Stage the 210/H-O2 Tech Regulator is Certified for up to 100% Oxygen Service thanks to Highly Specialized Component Materials and Manufacturing Processes. Cleaned and Assembled in a Clean Room Environment with Specially Designed Materials, Halocarbon Based Lubricants and Color-Coded for Easy Identification. The Hollis 210/H-O2's First Stage Regulator comes with a 300 BAR/4500 PSI DIN Connection. The DIN Hand-Wheel Connector comes in Oxygen Green for Easy Identification for Oxygen-Use-Only... more
Tags: US16486, USED: Hollis 210/H-02 Oxygen Regulator, DIN
|
- The SEASOFT SEAWOLF Weight Harness fits virtually anyone. With the height and width both adjustable, you have a custom fit every time. - Easy to use QUIK DITCH Weight Pockets hold up to 15 lbs. each. - Grommet holes on the QUIK DITCH Pockets allow you to easily attach many popular knives. - Optional weight pockets are also available to allow the adding of non-ditchable weight. - Other weight harnesses are available, none are as comfortable and easy to use as the SEASOFT SEAWOLF Weight Harness!... more
Tags: SSTSWWH, Seasoft, Buoyancy Compensators, Essential Equipment, Seasoft Seawolf Weight Harness Holds 30 LBS
|
The Genesis Sirene is designed exclusively for women! With a hibiscus pattern, this buoyancy compensator screams femininity. The hybrid air cell is the perfect blend of inflation. "The Balance between buoyant lift and total weight capacity is right on". Sirene is equipped with the NEW CQR2 Weight Pocket System, has two non-releasing rear weight pockets and a comfort-pad gel core neckline. The CRQ2 weight Release System and two non-releasing rear pockets are able to facilitate 26lbs (11.8kg) total weight with 8lbs (3.6kg) in each of the CRQ2 releasable pockets and 5lbs (2... more
Tags: GNSSRMD, Genesis, Buoyancy Compensators, Essential Equipment, Genesis Sirene Women's BCD Medium, Lift 29#
|
|
|