800.637.6880
212.645.1234
|
Hollis DC2/212 Regulator with 30" (76.2 cm) Maxflex Hose
5
See More Similar
Scuba Regulators »
|
|
Hollis DC2/212 Regulator with 30" (76.2 cm) Maxflex Hose Yoke
|
List Price:
|
$474.95
|
|
Our Price:
|
$424.95
|
|
You Save:
|
$50.00 (11%)
|
SKU:
HLSDC2212
In Stock
|
|
|
Questions about this item:
Shopper What is the main differences between the DC1 and the DC2, both are on the same price range, DC2 seems more futuristic but any other differences regarding performance, features, etc.. ?
THOMAS P The main difference is that the DC1 can swivel while the DC2 doesn't. It depends what you want out of diving. If you want to run doubles or sidemount, having a first stage that can swivel will make routing hoses a little easier. However, that's usually based on what you want. I have the DC2 and have no issues with it. This regulator performs very well. Also, some might argue that a first stage that swivels can be a potential failure point. Again, it's up to you and your diving beliefs. Best of luck. Can't go wrong with the Hollis regs.
JOHNATHON B The DC1 first stage has all the low pressure ports mounted on a swivel that rotates 360* about the axis of the regulator. This adds convenience as well as flexibility with the hoses. The DC2 does not have the swivel and in theory is a higher performance regulator since your breathing gas does not have to make an extra 90* turn. I have the DC2 and it is a great first stage. I also have the DC1 for sidemount setups. I have taken them both to 130ft, and do not notice a difference in performance between the two models. I would recommend either based off of your preference.
JOSEPH M The DC1 works great on deep dives I have not tried to DC2
ANDREW G I honestly can't say for sure what the main difference is other than the swiveling turret and body I don't know. I have the 212 and have never had any problems with it. Good rule of thumb is the more moving parts there are the higher the chance of somthing going wrong. Be smart about it buy the DIN version and a converter to YOKE. If you travel you can use whatever without taking it to a shop and being switched.
Shopper Does this connect to DIN or Yoke?
JACOB C The DC2 212 I have is a yoke. When I asked Leisure Pro they said they only carry the yoke version. Hollis does list the DC2 212 on there web site as available in both configurations
DAVID P I bought the yoke model, but they sell both DIN and yoke.
MICHAEL J M Mine came as a yoke, but the one in this link is a DIN, if you go by the picture. Better contact LP to make sure...
ANDREW G It depends on which one you pick When you check out. But think about it before you buy the YOKE if you live in the U.S. I would get the DIN like I did and just get the YOKE converter, if you leave the U.S. you will almost certainly have to use a DIN tank. So just avoid the hassle of having a shop convert your first stage and get the DIN then a yoke converter you can just screw on. Problem solved and it only cost you like $30-$35 once for the converter. Another thing while I'm at it this thing will free flow like crazy at shallow depth if you have it set to dive and as sensitive as it can be so don't turn it all the way over for the first 15-20 ft. Crazy easy breathing though
JOSEPH M Yoke. I believe they sell an adaptor
RANDY K Of you click on select type it will give you the choice. Both are available.
RANDY K The ad should probably specify. If it does not I would assume yoke since 95% of American sold regulators are yoke. If you get the wrong one I'm sure they'll replace it no questions asked.
THOMAS P You can get the first stage in either a DIN or Yoke. I got mine with a DIN first stage and purchased a Yoke adapter. I have the best of both worlds. Great regulator!
JOHN R The DC212 I ordered has a DIN fitting, however on the leisure pro site there is a the same regulator with a yoke fitting.
Shopper how long is hose for this reg?
OSCAR L I'm not sure I understand your question. In 2 years I have done 6 travels with 50 dives. The hose is Ok.
OSCAR L Hi:
Mine is 27,7" Length
Warranty Information
This product has a limited warranty of 24 months.
www.hollisgear.com/support_warranty.asp (510) 729-5110
Whats in the box:1st Stage, 2nd Stage, Maxflex LP Hose and CD Owner's Manual The Hollis DC2 1st Stage Regulator is a Compact and Streamlined Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. The standard Diaphragm Regulator does allow water into the Mainspring Chamber so that the Diaphragm can perform this Transmission of Pressure Changes. With the DC2 there is a Secondary Environmental Diaphragm Membrane that Seals off the Spring Chamber keeping the First Stage completely Sealed off from the Environment adding a Second-Layer of Corrosion Resistance and the Environmental Sealing Prevents Icing of the First Stage, allowing the Regulator to withstand the rigorous CE standard for coldwater performance. The First Stage has 4 Low Pressure Ports (LP) with 3/8" Threads and 2 High Pressure Port (HP) with 7/16" Threads. The DC2 First Stage Regulator is manufactured from Marine-Grade Chrome Plated Brass. The Compact & Streamlined Design provides the Ultimate Control over the Internal Air Path for superior air delivery. The DC2 is Nitrox compatible to 40% out of the box. The Regulator weighs 35.2 oz (998 g). The Hollis 212 Second Stage Regulator is a Pneumatically Balanced Demand Valve Design with a Patented Dynamic Adjustment that once set Automatically Maintains Inhalation Effort throughout the Dive by Compensating for Depth Changes. The Hollis 212 Second Stages also has an Adjustable Venturi System. This simple Dive/Pre-Dive Switch allows the diver to Adjust Inhalation Effort so the Second Stage won't Free-Flow during shore entries or long surface swims. All Controls are Easy Grip Controls for Precise Adjustments even while Wearing Gloves. The Hollis 212 Second Stage Housing is manufactured from Durable ABS/Polycarbonate. Regulator also comes equipped with a Patented Orthodontic Silicone Rubber Mouthpiece for Comfort and Reduced Jaw Fatigue. Regulator features a 30" (76.2 cm) MaxFlex Hose. The MaxFlex Hose is a lightweight, flexible, braided hose designed to outperform and outlive traditional rubber hoses. The Hollis DC2/212 Regulator is available in a Yoke or DIN Cylinder Connection, comes with a CD Owner's Manual and is covered by a 24 month limited warranty.
- Hollis DC2/212 Regulator:
- Meets Rigorous CE Standard for Coldwater Performance
- CD Owner's Manual
- 2 Year Limited Warranty
- First Stage:
- Over-Balanced Diaphragm Regulator Design
- Provides Progressively Greater Intermediate Pressure with Increased Depth and Gas Density
- Superior Gas Delivery Under Most Extreme Conditions
- Dual Diaphragm Design: Completely Seals Internal Components from Environment
- Environmental Sealing Prevents Icing
- 4 Low Pressure Ports (LP) with 3/8" Threads
- 2 High Pressure Port (HP) with 7/16" Threads
- Material: Forged Marine-Grade Chrome Plated Brass
- Compact & Streamlined Design
- Ultimate Control Over Internal Air Path for Superior Air Delivery
- Nitrox Compatible to 40% Out-of-the-Box
- 2 Choices: Yoke or DIN Cylinder Connection
- Weight: 35.2 oz (998 g)
- Second Stage:
- Lightweight ABS/Polycarbonate Housing
- Patented Silicone Rubber Orthodontic Mouthpiece
- Mouthpiece Provides Comfort and Reduced Jaw Fatigue
- Pneumatically Balanced Demand Valve Design
- Patented Dynamic Adjustment Automatically Maintains Inhalation Effort
- Dynamic Adjustment: Compensates for Depth Changes
- Adjustable Venturi System (A.V.S.)
- AVS: Simple Dive/Pre-Dive Switch Adjust Inhalation Effort
- AVS: Prevents Free-Flow During Shore Entries or Long Surface Swims
- All Controls: Easy Grip Controls for Precise Adjustments Even while Wearing Gloves
- 30" (76.2 cm) 3/8" Threaded Maxflex Hose
- Lghtweight, Flexible, Braided Hose
- Designed to Outperform and Outlive Traditional Rubber Hoses
| 1'st Stage Type | Over-Balanced Diaphragm | | LP Ports | 4 | | HP Ports | 2 | | Adjustable 2'nd Stage | Yes | | Nitrox Compatible | Yes Up to 40% | | 2'nd Stage Type | Pneumatically Balanced Demand Valve | | Materials | First Stage: Forged Marine Grade Chromed Brass Second Stage Housing: ABS/Polycarbonate Mouthpiece: Silicone Rubber | | Hose Thread | 3/8" | | Hose Length | 30" (76.2 cm) | | Total Weight | First Stage Only: 35.2 oz (998 g) | | Weight [with packaging] | Din: 3 lb, Yoke: 3.5 lb |
5/22/2012 5.0Quality Product, great price - Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Wreck Diving
4/18/2012 5.0i would buy this again - Adjustable
- Comfortable
- Effortless Breathing
- Nitrox Compatible
- Diving Type:
- Open Water Diving, Rescue Diving
- Was this a gift?:
- No
3/6/2012 5.0Hollis DC2 212 Regulator By Diver Manny from Downey, CA - Adjustable
- Comfortable
- Effortless Breathing
- Nitrox Compatible
- Diving Type:
- Night Diving, Open Water Diving, Rescue Diving, Wreck Diving
- Was this a gift?:
- No
- Adjustable
- Comfortable
- Effortless Breathing
- Lightweight second stage
- Nitrox Compatible
- Diving Type:
- Cave Diving, Open Water Diving, Rescue Diving, Wreck Diving
- Was this a gift?:
- No
By Scubanut from Chicago, IL - Adjustable
- Comfortable
- Effortless Breathing
- Nitrox Compatible
- Cold Water
- Extreme Depths
- Warm Water
- Diving Type:
- Drift Diving, Night Diving, Open Water Diving
- Was this a gift?:
- No
|
|
Related products for Hollis DC2/212 Regulator with 30" (76.2 cm) Maxflex Hose Yoke
|
The Hollis DC2 1st Stage Regulator is a Compact and Streamlined Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids... more
Tags: HLSDC2212D, Hollis Gear, Regulators, Essential Equipment, Hollis DC2/212 Regulator with 30" (76.2 cm) Maxflex Hose Din
|
The Hollis DC1 1st Stage Regulator is an Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids... more
Tags: HLSDC1212DN, Hollis Gear, Regulators, Essential Equipment, Hollis DC1/212 Regulator with 30" (76.2 cm) Maxflex Hose Din
|
For a limited time only trade in your old Regulator and save $100 of the Aeris AT 600 ION LT Regulator, simply add this to your cart and complete purchase and we will contact you to arrange pick up of your old Regulator. ANY MAKE, ANY MODEL, ANY AGE, ANY CONDITION, Working or not! Click here for more details & information on this offer The AT 600 ION LT is the latest iteration of the flagship Aeris ION Regulator specifically designed for the traveling diver. The compact ION has been reduced in weigh by removing the swivel and by adding an ultra-flexible braided MaxFlex hose... more
Tags: AERA6IRBKNDD, Aeris, Regulators, Essential Equipment, Aeris AT 600 ION LT DIN Regulator with 30" (76.2 cm) MaxFlex Hose, Black
|
The Hollis DC3 1st Stage Regulator is an Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids... more
Tags: HLSDC3221D, Hollis Gear, Regulators, Essential Equipment, Hollis DC3/221 Regulator with 30" (76.2 cm) Maxflex Hose, DIN Din
|
SIDE EXHAUST REGULATOR provide precision air flow to the diver. Hollis has redesigned the old Tilt-Servo Valve' with a Lever-Servo Valve' to provide unparalleled performance in a side exhaust configuration... more
Tags: HLSDC75Y, Hollis Gear, Regulators, Essential Equipment, Hollis DC7 500SE Regulator With Maxflex Hose Yoke
|
Improve the Flexibility, Lower the Total Weight and add Extreme Comfort when Diving with Hollis Gear's 30" (76.2 cm) MaxFlex Hose. The MaxFlex Hose is a Lightweight, Flexible, Braided Hose Designed to Outperform and Outlive Traditional Rubber Hoses. Hose has Durable Chrome Plated Corrosion Resistant Fittings. The First-Stage End Fitting has 3/8" Threads for Standard LP Ports. Hose is covered by a 2 year limited warranty.... more
Tags: HLSLPMH30, Hollis Gear, General Accessories, Assorted Accessories, Hollis Low Pressure Maxflex Hose 30"
|
The Hollis DC2 1st Stage Regulator is a Compact and Streamlined Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids... more
Tags: HLSFSDC2D, Hollis Gear, Regulators, Essential Equipment, Hollis DC2 First Stage Only Din
|
The AT 600 ION is the latest iteration of the flagship Aeris ION Regulator Line. The AT 600 ION has a swivel and by adding an ultra-flexible braided MaxFlex hose makes it one comfortable regulator. Paired with the ultra-compact AT 600; a brand new over-balance diaphragm first stage weighing in at just 29 oz (822.14 g). The AT 600 is a High Performance First Stage with Environmental Seal. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism... more
Tags: AERA6IRBK, Aeris, Regulators, Essential Equipment, Aeris AT 600 ION Swivel Regulator with Environmental Seal and MaxFlex Hose, Black
|
The AT 600 ION LT is the latest iteration of the flagship Aeris ION Regulator specifically designed for the traveling diver. The compact ION has been reduced in weigh by removing the swivel and by adding an ultra-flexible braided MaxFlex hose. Paired with the ultra-compact AT 600; a brand new over-balance diaphragm first stage weighing in at just 24 oz (680.4 g). The AT 600 is a High Performance First Stage with Environmental Seal. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism... more
Tags: AERA6IRBKND, Aeris, Regulators, Essential Equipment, Aeris AT 600 ION LT Regulator with MaxFlex Hose, Black
|
|
|