800.637.6880
212.645.1234
|
|
Dive Rite Cavern/Safety Reel
3
See More Similar
Scuba Dive Reels »
|
|
Dive Rite Cavern/Safety Reel Without Drag 90' #36
|
List Price:
|
$59.00
|
|
Our Price:
|
$44.95
|
|
You Save:
|
$14.05 (24%)
|
SKU:
DIV411
In Stock
|
|
|
Questions about this item:
Shopper What's the difference between with drag and without drag? Which one is better for penetrating wrecks?
LeisurePro S Drag give better control
Warranty Information
This product has a limited warranty of 12 months.
Whats in the box:Reel with Bolt Snap and Line The Cavern/Safety Reel came about as North Florida cave training agencies began establishing standards in cave training. The established standard for cavern divers was to limit penetration no farther than 130 linear feet (40 meters) from daylight. Experienced cave divers use the Cavern/Safety Reel as a Jump Reel or as a Backup for Security. Wreck Divers will use this Reel for Shooting Lift Bags. The Cavern/Safety Reel is available with 90' (27.4 meters) of Heavy .083" (2.11 mm) #36 DuPont Fiber Braided Line, with 350 lbs (158.76 kg) Breakage Strength and a Medium Marine Grade Stainless Steel Bolt Snap. The Reel Positions the Handle on Top, which helps divers who use a handheld light to hold both the light and the reel in one hand, freeing the other hand to work the reel. The Marine Grade Stainless Steel Frame of the reel comes with a Series of Pre-Drilled Holes so divers can change positions from a Top-Mount Handle to a Side-Mount Handle or a Left-Hand Operated Reel. The Injected Molded Polycarbonate Spool with T"-Top Lockdown Screw for Easy Grip is Resistant to Breakage and Cracking. The Spool is held in place with a Stainless Steel "C" Clip so replacing the Spool or Cleaning-Up a Jammed Reel is Simple. The Reel is also equipped with a Corrosion Resistant Stainless Steel Axle and weighs 1 lbs (.45 kg). Reel is covered by a 12 month limited warranty.
- Dive Rite Cavern/Safety Reel:
- Experienced Cave Divers use Cavern/Safety Reel as Jump Reel or as Backup for Security
- Wreck Divers Use Reel for Shooting Lift Bags
- Line Length: 90' (27.4 meters)
- Line Diameter: Heavy .083" (2.11 mm) #36
- Line Material: DuPont Fiber Braided
- Breakage Strength: 350 lbs (158.76 kg)
- Medium Marine Grade Stainless Steel Bolt Snap
- Converts from Top to Side to Left Hand Operation
- Strong and Durable Design
- Marine Grade Stainless Steel Axle "C" Clip and Frame
- Polycarbonate Spool
- Resistant to Breakage and Cracking
- "C" Clip Allows Easy Replacement of Spool or Cleaning-Up Jammed Reel
- T"-top Lockdown Screw for Easy Grip
- Weight: 1 lbs (.45 kg)
- 1 Year Limited Warranty
| Line Material | DuPont Fiber Braided | | Line Diameter | .083" (2.11 mm) #36 | | Line Length | 90' (27.4 meters) | | Line Tensile Strength | 350 lbs (158.76 kg) | | Reel Materials | Spools: Polycarbonate
Axles, Frame and "C" Clip: Stainless Steel | | Weight [with packaging] | 1 lb |
1/11/2011 (1 of 1 customers found this review helpful) 1.0Junk! Falls apart, again and again... By Scooter from West Palm, FL 8/7/2008 (1 of 1 customers found this review helpful) 5.0Great Reel from Dive Rite By danberall from Hudson, NH - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Cold Water
- Extreme Depths
- Recreation
5/22/2008 (2 of 3 customers found this review helpful) 1.0drag screw eaily broken By Mike from Florida About Me Recreational Diver 3/20/2008 (0 of 1 customers found this review helpful) By DM Doc from Pensacola FL - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Stylish
- Cold Water
- Recreation
- Warm Water
|
|
Related products for Dive Rite Cavern/Safety Reel Without Drag 90' #36
|
The Cavern/Safety Reel came about as North Florida cave training agencies began establishing standards in cave training. The established standard for cavern divers was to limit penetration no farther than 130 linear feet (40 meters) from daylight. Experienced cave divers use the Cavern/Safety Reel as a Jump Reel or as a Backup for Security. Wreck Divers will use this Reel for Shooting Lift Bags. The Cavern/Safety Reel is available with 140' (42.7 meters) of Durable DuPont Fiber Braided #24-Line which has 220 lbs (99.80 kg) Breakage Strength and a Medium Marine Grade Stainless Steel Bolt Snap... more
Tags: DIV4100, Dive Rite, Reels, Add-On Gear, Dive-Rite Cavern/Safety Reel Without Drag 140' #24
|
The Dive Rite Primary Cave Reel has 250' (76.2 meters) of Heavy .083" (2.11 mm) #36 DuPont Fiber Braided Line, with 350 lbs (158.76 kg) Breakage Strength and a X-Large Marine Grade Stainless Steel Bolt Snap. The Reel positions the Handle on Top, which helps divers who use a handheld light to hold both the light and the reel in one hand, freeing the other hand to work the reel. The Marine Grade Stainless Steel Frame of the reel comes with a Series of Pre-Drilled Holes so divers can change positions from a Top-Mount Handle to a Side-Mount Handle or a Left-Hand Operated Reel... more
Tags: DIV4310, Dive Rite, Reels, Add-On Gear, Dive-Rite Primary Reel Without Drag 250' #36
|
North Florida cave diver, Woody Jasper, first invented sidewinder-style reels around 1980. Less likely to entangle than other reels on the market, Woody's original reel was made of aluminum and a PVC spool. The side-handle style of the reel lent itself to exploration because it could easily switch from hand to hand while laying out line. Twenty years later, sidewinder-style reels were popularized in the technical diving community when DIR enthusiasts began using them for paying out line in deep caves at high speed on a Dive Propulsion Vehicle (DPV)... more
Tags: DIV50250, Dive Rite, Reels, Add-On Gear, Dive Rite Sidewinder Primary Reels Wreck 250' #36
|
North Florida cave diver, Woody Jasper, first invented the Explorer Reel around 1980. As cave explorations were becoming longer, deeper, and more extensive a reel was needed that could help an explorer make some serious penetrations into a virgin cave system. Less likely to entangle than other reels on the market, Woody's original reel was made of aluminum and a PVC spool. The side-handle style of the reel lent itself to exploration because it could easily switch from hand to hand while laying out line. Twenty years later... more
Tags: DIV51550, Dive Rite, Reels, Add-On Gear, Dive Rite Sidewinder Explorer Reels Wreck 550' #36
|
The genesis of the Primary Reel began in 1984 when North Florida cave divers needed a reel with 400' (122 meters) of line in order to reach the main line in the Devil's cave system at Ginnie Springs. Voila! The Dive Rite Primary Reel was born. The Dive Rite Primary Cave Reel has 400' (122 meters) of DuPont Fiber Braided .073" (1.86 mm) diameter #24-Line with breakage strength of 220 lbs (99.80 kg) and a X-Large Stainless Steel Bolt Snap. The Reel positions the Handle on Top, which helps divers who use a handheld light to hold both the light and the reel in one hand... more
Tags: DIV4300, Dive Rite, Reels, Add-On Gear, Dive-Rite Primary Reel Without Drag 400' #24
|
North Florida cave diver, Woody Jasper, first invented sidewinder-style reels around 1980. Less likely to entangle than other reels on the market, Woody's original reel was made of aluminum and a PVC spool. The side-handle style of the reel lent itself to exploration because it could easily switch from hand to hand while laying out line. Dive Rite's Sidewinder Series of Reels are designed to be Anti-Jam by using Precision Machine Tolerances between the Frame and the Spool making it nearly impossible for the line to slip between the spool and the handle... more
Tags: DIV52140, Dive Rite, Reels, Add-On Gear, Dive Rite Sidewinder Reels Safety Cave 140' #24
|
The XT1 Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT1's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT1 performs right alongside premier regulators on the market today. The Dive Rite XT1 Regulator with five 3/8" Threaded Low Pressure Ports gives divers Ultimate Flexibility in Hose Routing. This is Especially Beneficial to the Back-Mount Technical Diver where the need for a Streamlined Regulator Configuration is required... more
Tags: DIVRG5100D, Dive Rite, Regulators, Essential Equipment, Dive Rite XT1 First Stage Only (No Hose) Din
|
The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today. The Dive Rite XT1 First-Stage Regulator with Five-3/8" Threaded Low Pressure Ports gives divers Ultimate Flexibility in Hose Routing. This is Especially Beneficial to the Back-Mount Technical Diver where the need for a Streamlined Regulator Configuration is required... more
Tags: DIVRG5300D, Dive Rite, Regulators, Essential Equipment, Dive Rite XT1 First Stage with XT2 Second Stage Regulator Din
|
The Thigh Pocket is part of Dive Rite's new line of Harness Accessory Pockets that builds upon Technology from the Backpacking Industry. Each Pocket includes Daisy Chain Webbing on the External Pocket for Clipping Z-Knives, Trauma Shears or any Tool that you need in easy reach. Dive Rite's new Thigh Pocket includes an Innovative Leg Band made of a Proprietary Material used in Bandages. The Material Holds-Up to Salt Water and Dries Quickly, plus Silicone Strips placed on the inside of the Band Grip your Exposure Suit and keeps the Leg Band in place. At 4" (10 cm) in width... more
Tags: DIV3201, Dive Rite, General Accessories, Assorted Accessories, Dive-Rite Thigh Pocket with Daisy Chain
|
|
|