800.637.6880
212.645.1234
|
|
Dive-Rite Stainless Steel Back-Plate
4.5
See More Similar
Buoyancy Compensators | Scuba BCD »
|
|
Dive-Rite Stainless Steel Back-Plate
|
List Price:
|
$150.00
|
|
Our Price:
|
$124.95
|
|
You Save:
|
$25.05 (17%)
|
SKU:
DIV2116
In Stock
|
|
|
Questions about this item:
Shopper Do the cam straps come with this item or with the Transplate harness or with the wings or do I need to buy them separatly?
LeisurePro S The cam straps come with the Transpac harness. If you are looking at the Transplate harness, you will have to look at product DIV2035 which is a set of 2 cam straps.
Shopper Does this back plate have the tank strap slots for use with with single tanks? The picture looks as though it has then!
LeisurePro S Yes it has them
Shopper How much does the stainless steel plate weigh and can I incorpaorate it with my transpack II?
LeisurePro S 6Lbs and yes.
Shopper Does the back plate have tank strap slots? They are not shown in the picture. I will use it for a single tank. Would I require the single tank adapter?
LeisurePro S Yes it has tank strap slots. No adapter needed, just bands.
Shopper Can you use the DiveRite Stainless Steel backplate with the OMS IQ backpack harness??
Warranty Information
This product has a limited warranty of 12 months.
Whats in the box:Dive-Rite Stainless Steel Back-Plate Greg Flanagan first invented the metal back-plate using aluminum in 1979 for North Florida cave divers. He realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the diver's center of gravity (tanks) being surrounded by the center of buoyancy (BC wings). Plus, the diver gains a clean chest area with room for gear attachment points on the harness. Bill Hogarth Main went on to popularize the back-plate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig." Dive Rite began manufacturing Back-Plates for the public in 1984 and pioneered 11" (27.9 cm) On-Center Bolt Spacing creating an Industry Standard that is still followed today. Northeastern Wreck Divers adapted the concept and began using a Stainless Steel Back-Plate; at 5.5 lbs (2.5 kg) in weight, it is ideal to Counterbalance Buoyancy Characteristics of Thick Dry Suit Exposure Protection. The 11" (27.9 cm) On-Center Holes accommodate Standard Double Tank Bolt Kits. Holes along the Perimeter of the Plate allow for Mounting Lights, Pony Bottles, Lift Bags and other Accessories. 1" and 2" (2.5 and 5.1 cm) Slots permit diver's choice of Crotch Straps. Two 3/8" (9.5 mm) Slots along the Bottom are designed to fit Screws for attaching Lift Bag Sleeves, Side Mount Butt Plates or other Accessories. 2" (5.1 cm) Slots along the Center allow Single-Tank divers to use Cam Straps without a Single-Tank Adaptor. All Edges are De-Burred to Eliminate Sharp Edges and Prevent Abrasion to Harness Webbing. Back-Plate is manufactured from Grade 304-Stainless Steel and is Passivated, to prevent Oxidation. The Back-Plate measures (H x W) 15.5" x 10.5" (39 x 27 cm) comes with a 12 month limited warranty and is proudly made in the U.S.A.
- Dive-Rite Stainless Steel Back-Plate:
- 11" (27.9 cm) On-Center Bolt Spacing Creating Industry Standard
- Northeastern Wreck Divers Adapted the Stainless Steel Back-Plate
- 5.5 lbs (2.5 kg) Weight, Ideal to Counterbalance Buoyancy Characteristics of Thick Dry Suit Exposure Protection
- 11" (27.9 cm) On-Center Holes Accommodate Standard Double Tank Bolt Kits
- Perimeter Holes for Mounting Lights, Pony Bottles, Lift Bags and Accessories
- 1" and 2" (2.5 and 5.1 cm) Slots for Crotch Straps
- Two 3/8" (9.5 mm) Slots on Bottom for Attaching Lift Bag Sleeves, Side Mount Butt Plates or Accessories
- 2" (5.1 cm) Center Slots for Cam Bands to Accommodate Single Tank Use
- All Edges, De-Burred to Eliminate Sharp Edges
- De-Burring: Prevent Abrasion to Harness Webbing
- Material: Corrosion Resistant 304-Stainless Steel
- Passivated, to Prevent Oxidation
- Dimensions: (H x W) 15.5" x 10.5" (39 x 27 cm)
- Made in the USA
- 1 Year Limited Warranty
| Material | 304-Stainless Steel | | Cylinder Capacity | Single or Doubles | | Crotch Strap Slots | Yes | | Dimensions | (H x W) 15.5" x 10.5" (39 x 27 cm) | | Weight | 5.5 lbs (2.5 kg) | | Compatibility | Multiple Harness & Wings | | Weight [with packaging] | 5 lb |
6/3/2010 (1 of 1 customers found this review helpful) 5.0Perfect for cold water diving. - Easy To Use
- Functional
- Improves Diving Experience
- Solid Construction
- Cold Water
- Professional
- Recreation
8/7/2008 (0 of 1 customers found this review helpful) - Diving Type:
- Drift Diving, Night Diving, Open Water Diving
6/12/2008 (1 of 3 customers found this review helpful) By JarJar from Trier, Germany - Cold Water
- Extreme Depths
- Professional
- Recreation
2/17/2008 (5 of 5 customers found this review helpful) 5.0DIve Rite Transplate Setup 10/7/2007 (1 of 1 customers found this review helpful) 5.0Backplates are the way to go By H-tech.research from Florida - ALL TYPES OF DIVING
- Professional
- Recreation
- Warm Water
|
|
Related products for Dive-Rite Stainless Steel Back-Plate
|
Manta's patented stainless steel back plate is built right here in the USA. Back-Plate is completely made of corrosion resistant brushed (304) stainless steel for durability and long life. Back-Plate is designed to allow easy threading of a harness without the use of keepers. Multiple slots cut into the plate allow custom harness rigging; allow attachment of a wide variety of accessories and lanyards. Back-Plate easily accommodates either single or double cylinder configurations. Back-Plate weighs 5 lbs (2... more
Tags: MNTBP, Manta, Buoyancy Compensators, Essential Equipment, Manta Stainless Steel Back-Plate
|
The X-Tek Form Tek Harness is a Three-Piece Form-Harness-System with padded shoulders and Anatomically Optimized Back Pack for the ultimate in comfort is equipped with Quick Release Buckles on both left and right shoulders and a Cross-Chest Sternum Strap all for easy removal. The Shoulder and Sternum Straps are Adjustable for a Custom Fit. System comes standard with a Stainless Steel Back-Plate and is convertible for single cylinder use. The Form Tek System has more D-Rings for attachment of accessories than most Tek Setups on the market. Four Large D-Rings on the Shoulders... more
Tags: SCPXTFTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Form Tek Harness System with Stainless Steel Back Plate
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Lanyards for lights, cameras, gauges, game bags, or maybe even a fish stringer when spear fishing. Having a few spare Quick Links in your gear bag is a must for the serious diver. The Link has a Single Opening that Closes with a Threaded Screw Gate and can be used for Semi-Permanent Connections. Each Quick Link is Meticulously-Inspected at Dive Rite's Factory to ensure Smooth Edges that won't Cut Fingers and Gates Open-and-Shut Reliably. Made of Marine Grade 316-Stainless Steel, measures 2" (5.1 cm)... more
Tags: Dive Rite Stainless Steel Medium Quick Link,General Accessories,Assorted Accessories,Medium Quick Link,Aqua,Steel Medium Quick Link,Div1014ss
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System with Stainless Steel Back Plate
|
New size! Dive Rite's Single Tank Adapter (STA) has been Re-Sized to fit squarely in the opening of Dive Rite's Travel and Voyager Series Wings. For divers who frequently switch between Double Tank and Single Tank Rigs, Dive Rite's Single Tank Adapter is a convenient way to attach Cam Straps to a Hard Metal Back Plate that does not have Tank Band Slots. Increase the Versatility of your Set-Up with this Single Tank Adapter. Adapter is constructed of Marine Grade 304-Stainless Steel, comes with Mounting Hardware, measures 13" x 3-3/8" (33 x 8.5 cm) and weighs 1.1 lbs (0.5 kg)... more
Tags: DIV1090SS, Dive Rite, General Accessories, Assorted Accessories, Dive-Rite Stainless Steel Single Tank Adapter (STA)
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Lanyards for lights, cameras, gauges, game bags, or maybe even a fish stringer when spear fishing. Made of Marine Grade 316-Stainless Steel, Dive Rite's Heavy-Duty Bolt Snaps are designed for saltwater use and feature Swiveling Bases for Ease of Connection. Each Bolt Snap is Meticulously Inspected at Dive Rite's Factory to ensure Smooth Edges that won't cut fingers and that Gates Open and Shut Reliably. HW1026 is a Medium Clip that measures 3.75" (9.5 cm) and is covered by a 12 month limited warranty.... more
Tags: General Accessories,Swivel Eye Bolt Snap,Dive Rite Stainless Steel Medium Swivel Eye Bolt Snap #Hw1026-1,Assorted Accessories,Medium Swivel Eye Bolt Snap,Dive Rite,Div1026
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Lanyards for lights, cameras, gauges, game bags, or maybe even a fish stringer when spear fishing. Having a few spare Stainless Steel D-Ring Holders in your gear bag is a must for the serious diver. This D-Ring Holder can be attached to webbing on your equipment with a D-Ring and can be utilized in many applications. Stainless Steel construction gives corrosion resistant and long lasting usage. D-Ring Holder is great Save-A-Dive Kit item Buy several so you're never caught short handed on a dive... more
Tags: General Accessories,Div1081,Dive Rite Stainless Steel D-Ring Holder,Assorted Accessories,Dive Rite,D-Ring Holder
|
Back plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 5.75 lbs and include the following slots: 1" and 2" width Crotch Strap, (2) Cam Band, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Stainless Steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness The OMS Comfort Harness System II is perfect for those who want a quality diving harness... more
Tags: OMSCHS2SLU, OMS, Buoyancy Compensators, Essential Equipment, OMS Comfort Harness System II with Stainless Steel Back Plate Un-Strung Large
|
These stainless steel finger spools are as rugged as they come. Crafted of 16 gauge 304L stainless steel for durability in marine-grade environments, these reels are TIG welded and then electro-polished. Available in 30-foot (9.2m) and 100-foot (30.5m) increments, these stainless steel spools are compact with a narrow footprint as compared to similar plastic spools, giving the diver the advantage of saving real estate or carrying multiple spools easily. Smooth edges provide comfort and an easily-held ergonomic design. Includes a premium quality... more
Tags: DIVFSS100, Dive Rite, Reels, Add-On Gear, Dive Rite Stainless Steel Finge Spool 100'
|
Made of marine grade 316 stainless steel, our heavy-duty bolt snaps are designed for saltwater use and feature swiveling bases for ease of connection. Each bolt snap is meticulously inspected at our factory to ensure smooth edges that won't cut fingers and that gates open and shut reliably. HW1025 Small (3-inch)... more
Tags: DIV1025, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Stainless Steel Small Swivel Bolt Snap #HW1025
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Lanyards for lights, cameras, gauges, game bags, or maybe even a fish stringer when spear fishing. Having some spare D-Rings in your gear bag is a must for the serious diver. Combined with a Belt Slide (sold separately) the D-Ring is the best way to create an Attachment Point on Soft Webbing. Keeping items Clipped to your Equipment make you more Streamline in the water and prevent items such as Gauges from Damaging the Environment. This 1" (2... more
Tags: Div1019,General Accessories,Stainless Steel,1in D-Ring,Assorted Accessories,Dive Rite Stainless Steel 1" (2.5 Cm) D-Ring,Aqua
|
Highland by XS Scuba's Stainless Steel Back-Plate is made from Durable and Corrosion Resistant 11 Gauge (.115"/2.92 mm) 316 Grade Stainless Steel. Back-Plate weighs in at 5 lbs (2.27 kg) and is Laser Cut for Dimensional Accuracy. To Protect the Harness Webbing, the Stainless Steel Back-Plate has CNC-Machined Beveled Edges and a final "Polished Finish" by Hand for Smooth Slots and Holes. Back-Plate has Angled and Horizontal Slots for "Straight" or "Cross-Over" Shoulder Strap Configurations, Mounting Holes at 11" (27... more
Tags: XSSSSB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Steel Back-Plate
|
|
|