800.637.6880
212.645.1234
|
|
Cressi Ellipse Octopus
4.5
See More Similar
Scuba Octopuses »
|
|
Cressi Ellipse Octopus
|
List Price:
|
$129.95
|
|
Our Price:
|
$119.95
|
|
You Save:
|
$10.00 (8%)
|
SKU:
CSBOE
In Stock
|
|
|
Questions about this item:
manolis p Maximum operating depth ?
CARLTON H The deepest I have used this octo is about 50 feet. I have taken it on dives down to 125 but never had to use it deeper than 50.
manolis p Is this Octopus compatible with an Atomic Z2 Regulator ?
WILLIAM K Greetings!
I cannot answer your question regarding the compatibility of this regulator to that of the Atomic Z2 regulator, but I can tell you that I have been diving with the Cressi Octo. for over two years now and it's the best safe second I have ever used.
Hope that helps.
--Bill--
MICHAEL M Mike
I can't help you very much - we have ScubaPro regulators, and the Cressi octopus works well with that. If there isn't something unique about the Atomic Z2 reg 1st stage, I'd guess the Cressi octopus would be compatible.
Shopper Is this octo compatible with Nitrox?
LeisurePro S Yes, ready for Nitrox up to 40%.
Shopper Will this reg be compatible as an octo for an Atomic M1?
LeisurePro S Yes, this would be fine for your M1- just as long you are not planning on using it below 50F.
Shopper Is this regulator safe to use in cold water? Would it be safe to use in California where the water can get as cold as 44?F?
LeisurePro S This octopus is not rated for use below 50degrees F. If you are going to be going below that, I would look into a cold water specific regulator set.
Warranty Information
This product has a limited warranty of 12 months.
www.cressisubusa.com
(800) 338-9143
Whats in the box:Octopus, LP Hose The Ellipse octopus uses the same elliptical housing as the Ellipse model second-stage regulator which is made from hi-tech polymers. The octopus model has a bright yellow purge cover and hose for easy identification in an out of air emergency. The octopus hose is 39" (100 cm) in length. All the internal components of the Ellipse octopus are the same as those found in the standard Ellipse; making periodic service parts the same as the primary regulator. Although the initial opening effort of the octopus regulator is set slightly higher than the primary Ellipse, once the valve has open the air is channeled by injection to the liquid silicone mouthpiece creating a venturi-effect enhancing the performance. On the top of the housing there is a flow deviator that acts on the Venturi effect, with dive/pre-dive switch. The Ellipse octopus is factory set to work with a supply pressure between 130 to145 psi (9 to 10 bars) and will work well with Cressi first-stage regulators and any other manufacture with similar first-stage supply (intermediate) pressures.
- Same Regulator as Ellipse Primary Second-Stage
- Hi-Tech Polymer Housing
- Liquid Silicone Mouthpiece
- Yellow Purge and Hose for Easy ID
- 39" (100cm) Hose
- High Performance Design
- Venturi Dive/Pre-Dive Switch
- Specifications:
- - Calibration pressure 9-10 bar
- - Average inhale effort (*) 8 mbar
- - Average exhale effort (*) 11 mbar
- - Average breathing work (*) 1.3 J/l
- - Air supply 1300 l/m Weight (without hose) 166 g
- (*) values measured in compliance with UNI EN 250 standards.
| Weight [with packaging] | 1.95 lb |
By bone bubbler from austin - Diving Type:
- Drift Diving
- Was this a gift?:
- No
By Big Burny from Waterloo, Qc, Canada About Me Casual/ Recreational - Does Not Leak
- Easy To Use
- Reliable
- Slim Design
- Diving Type:
- Open Water Diving, Wreck Diving
- Was this a gift?:
- No
By Khaled from State of Kuwait - Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Eliminating Hoses
- Upgrading Equipment
- Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Rescue Diving
- Was this a gift?:
- No
By Surf Fan from Texas About Me Casual/ Recreational - Comfortable Mouthpiece
- Does Not Leak
- Easy To Use
- Reliable
- Slim Design
9/22/2011 5.0Cressi Ellipse Octopus By Scuba2578 from Hartsdale, NY - Comfortable Mouthpiece
- Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Slim Design
- Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Wreck Diving
- Was this a gift?:
- No
|
|
Related products for Cressi Ellipse Octopus
|
The AC2/Ellipse Black Regulator 1st Stage The Cressi AC2 piston model. This is a non-balanced first stage with such high performance that it can be compared to lots of excellent balanced models. The small number of components, the low weight and excellent materials make it a great regulator for travel. The AC2 1st stage is a simple, reliable and ultra-durable performing unit .Very easy to be repaired and maintained The Ellipse Black 2nd Stage features the same compact. efficient elliptical shape as the other members of the Cressi Ellipse line... more
Tags: Essential Equipment,Cressi-Sub Ellipse,Cressi-Sub Regulator,Cressi Ellipse Black/Ac2 Regulator,Cressi,Regulators,Cressi-Sub,Ellipse in-Line Regulator
|
Pairing the balanced adjustable Ellipse 2nd stage regulator, with the hyper-balanced diaphragm 1st stage MC9 regulator, place this regulator at the very top of the Cressi range. The engineering and performance of this combination creates a high performance regulator that will compete with the best of them. The Ellipse Balanced 2nd stage has incorporated many of the characteristics of Ellipse. The Ellipse Balanced has a slightly larger housing which is made from a sound-absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse... more
Tags: CSBRE9, Cressi, Regulators, Essential Equipment, Cressi Ellipse Balanced MC9 Regulator
|
Pairing the balanced adjustable Ellipse 2nd stage regulator, with the hyper-balanced diaphragm 1st stage MC9 regulator, place this regulator at the very top of the Cressi range. The engineering and performance of this combination creates a high performance regulator that will compete with the best of them. The Ellipse Balanced 2nd stage has incorporated many of the characteristics of Ellipse. The Ellipse Balanced has a slightly larger housing which is made from a sound-absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse... more
Tags: CSBRE9B, Cressi, Regulators, Essential Equipment, Cressi Ellipse Black Balanced MC9 Regulator
|
Pairing the balanced adjustable Ellipse 2nd stage regulator, with the hyper-balanced diaphragm 1st stage MC9 regulator, place this regulator at the very top of the Cressi range. The engineering and performance of this combination creates a high performance regulator that will compete with the best of them. The Ellipse Balanced 2nd stage has incorporated many of the characteristics of Ellipse. The Ellipse Balanced has a slightly larger housing which is made from a sound-absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse... more
Tags: CSBRE9SC, Cressi, Regulators, Essential Equipment, Cressi Ellipse Balanced MC9-SC Regulator
|
Pairing the balanced adjustable Ellipse 2nd stage regulator, with the hyper-balanced diaphragm 1st stage MC9 regulator, place this regulator at the very top of the Cressi range. The engineering and performance of this combination creates a high performance regulator that will compete with the best of them. The Ellipse Balanced 2nd stage has incorporated many of the characteristics of Ellipse. The Ellipse Balanced has a slightly larger housing which is made from a sound-absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse... more
Tags: US13155, Cressi, USED: Cressi Ellipse Balanced MC9 Regulator
|
Pairing the balanced adjustable Ellipse 2nd stage regulator, with the hyper-balanced diaphragm 1st stage MC9 regulator, place this regulator at the very top of the Cressi range. The engineering and performance of this combination creates a high performance regulator that will compete with the best of them. The Ellipse Balanced 2nd stage has incorporated many of the characteristics of Ellipse. The Ellipse Balanced has a slightly larger housing which is made from a sound-absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse... more
Tags: US16955, Cressi, USED: Cressi Ellipse MC9-SC Regulator Din
|
The Ellipse Titanium uses an elliptical housing for the second-stage regulator which is made from hi-tech polymers and titanium. The use of titanium and the polymer create a very lightweight regulator. All the internal components of the Ellipse are a dependable high performance downstream valve design. Once the valve has open the air is channeled by injection to the liquid silicone mouthpiece creating a venturi-effect enhancing the performance. On the top of the housing there is a flow deviator that acts on the Venturi effect, with dive/pre-dive switch... more
Tags: CSBRE9T, Cressi, Regulators, Essential Equipment, Cressi Ellipse Titanium MC9 Regulator
|
The Ellipse uses an elliptical housing for the second-stage regulator which is made from hi-tech polymers. All the internal components of the Ellipse are a dependable high performance downstream valve design. Once the valve has open the air is channeled by injection to the liquid silicone mouthpiece creating a venturi-effect enhancing the performance. On the top of the housing there is a flow deviator that acts on the Venturi effect, with dive/pre-dive switch... more
Tags: CSBREB5, Cressi, Regulators, Essential Equipment, Cressi Ellipse Black MC5 Regulator
|
The Ellipse uses an elliptical housing for the second-stage regulator which is made from hi-tech polymers. All the internal components of the Ellipse are a dependable high performance downstream valve design. Once the valve has open the air is channeled by injection to the liquid silicone mouthpiece creating a venturi-effect enhancing the performance. On the top of the housing there is a flow deviator that acts on the Venturi effect, with dive/pre-dive switch... more
Tags: CSBRES, Cressi, Regulators, Essential Equipment, Cressi Ellipse Steel MC5 Regulator
|
The Ellipse uses an elliptical housing for the second-stage regulator which is made from hi-tech polymers. All the internal components of the Ellipse are a dependable high performance downstream valve design. Once the valve has open the air is channeled by injection to the liquid silicone mouthpiece creating a venturi-effect enhancing the performance. On the top of the housing there is a flow deviator that acts on the Venturi effect, with dive/pre-dive switch... more
Tags: US10511, USED: Cressi Ellipse Black/mc5 Regulator
|
The XS octopus is a lightweight, high performance second stage regulator. The XShas a venturi switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will increase. The XS octopus is equipped with a 33" (84 cm) hose, has a yellow front cover for easy identification in an out of air situation. The regulator has a soft and comfortable silicone mouthpiece and the housing is made of durable hi-tech polymers.... more
Tags: Cressi Xs Octopus,Essential Equipment,Cressi-Sub Octopus,Octopuses,Cressi,Xs Octopus,Cressi-Sub,Cressi-Sub Xs
|
The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2'nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator comes with an long 3/8" hose, Owner's Manual and a limited lifetime warranty.... more
Tags: CSBOC, Cressi, Octopuses, Essential Equipment, Cressi XS Compact Octopus
|
Buy Cressi Jr. Silicone Swim Cap Octopus from LeisurePro the divers emporium. Its a Swim Caps from category Watersports. Cressi Jr. Silicone Swim Cap Octopus can be posted worldwide.... more
Tags: CSBSCJO, Cressi, Swim Caps, Watersports, Cressi Jr. Silicone Swim Cap Octopus
|
If you've been hunting for an Octopus that is Easy-to-Use and can take the Hard Knocks that dive gear inevitable endures, look no further. The Aeris A2 Octopus' Simple, yet Effective Design is ideal for students, dive shops and divers who Demand Durability. The Bright Yellow Cover and Hose allows you or your buddy to Quickly-and-Easily Spot the A2 if it is ever needed. Dependable Downstream Demand Valve Design and this Octopus is Nitrox Compatible, up to 40%. The A2's Housing is made from an ABS/Polycarbonate Composite Blend of materials making the A2 both Extremely Rugged and Lightweight... more
Tags: AERA1O, Aeris, Octopuses, Essential Equipment, Aeris A2 Octopus
|
|
|