Questions about this item:

Warranty Information

This product has a limited warranty of 12 months.

www.cressisubusa.com
(800) 338-9143

Whats in the box:Depth Gauge, Pressure Gauge Boot and H.P. Hose

Mini-console 2 is a small compact console that houses the Cressi mini pressure gauge and a new, small, analog depth gauge. Both gauges are high quality instruments with a chrome plated brass case and the depth gauge has a diaphragm membrane function. Both gauges have a large circular easy to read scale.

On the luminescent face of the 70 meters depth gauge the first 12 meters depth readings are in 3 meter increments, (which correspond to the area of decompression stops), and are widely spaced for ease of reading. The face is divided into three different colored zones: green up to 20 meters, light blue from 20 to 40 meters, red from 40 meters to the end of the scale. The instrument has a maximum depth indicator that stops on the maximum depth reached during the dive.

The Mini-Manometer pressure gauge luminescent dial reads from 0-to 350 bars. The instruments face like the depth gauge is divided into three different colored zones: the area from 50 bars and below is highlighted in red with a solid bar and red stripes. If gauge is used on deeper dives, the red scale extends and fades to 100 bars. This provides for added reserve air indication required at greater depths. From 50 bars to approximately 200 bars is green and from 200 bars to end of scale is blue.

The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. The instrument is housed in a small, modern shaped console boot, made from polycarbonate and desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light.

The pressure and depth gauges are positioned in such a way that both instrument scan be read quickly and easily in any conditions. At the end of the console, slightly to the sides, there are two loops for fastening the instrument to the BCD or harness so that it does not hang down with the risk of catching and damaging the environment.